LevelOne FCS-3053 Instrucciones de uso
Fixed Dome Network Camera
Hardware User Manual
FCS-3053, FCS-3063
Ver. 2014/01/16
Hardware Manual
2
Table of Contents
Safety Instructions..................................................................................... 5
Introduction 6
List of Models.............................................................................................. 6
Package Contents...................................................................................... 6
Physical Description................................................................................. 7
FCS-3053 / FCS-3063 ...................................................................7
Installing the Camera on a Surface 8
Step 1: Unpack the Camera..................................................................... 8
Step 2: Attach the Mounting Plate......................................................... 9
Step 3: Connect the Cable..................................................................... 10
Step 4: Attach the Fixing Bracket........................................................ 10
Step 5: Install the Camera...................................................................... 12
Step 6: Connect to Network .................................................................. 13
Step 7: Access the Camera Live View................................................ 13
Step 8: Adjust the Viewing Angle and Focus ................................... 13
Step 9: Close the Dome Cover ............................................................. 14
Other Adjustments and Accessories 15
How to Adjust the Viewing Angle and Focus................................... 15
FCS-3053 / FCS-3063 .................................................................15
How to Replace the Dome Cover......................................................... 16
Accessing the Camera 18
Configure the IP Addresses .................................................................. 18
Using DHCP Server to Assign IPAddresses................................18
Using the Default Camera IPAddress..........................................20
Access the Camera.................................................................................. 22
Hardware Manual
3
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
Hardware Manual
4
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
Hardware Manual
5
Safety Instructions
Don’t open the housing of the product
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to
qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in
this manual. Adjust only those controls that are covered by the instruction manual, as an
improper adjustment of other controls may result in damage, and will often require
extensive work by a qualified technician to restore the video product to its normal
operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
Hardware Manual
6
Introduction
List of Models
This hardware manual contains the following models:
FCS-3053
Fixed Dome Network Camera, 3-Megapixel, PoE 802.3af, Day & Night,
IR LEDs
FCS-3063
Fixed Dome Network Camera, 5-Megapixel, PoE 802.3af, Day & Night,
IR LEDs, WDR
From the installation perspective, these models are similar; therefore, one manual is used for
all of them.
Package Contents
Camera
Mounting Screw Kit
Drill Template
Quick Installation Guide
Drill Template
or
Hardware Manual
7
Physical Description
FCS-3053 / FCS-3063
1) Ethernet Port
Connects to the network using a standard Ethernet cable (CAT5 / CAT6).
2) Reset Button
Restores the camera factory default settings. To do the reset, press and hold the Reset Button
for at least 5 seconds or until the Ethernet port LEDs turn off.
Hardware Manual
8
Installing the Camera on a Surface
This section describes the procedures in installing the camera directly on a flat surface, such
as the ceiling or the wall. For simplicity, most of the camera images used in the succeeding
sections were taken using the camera model with heat sink; same procedures apply to the
model without heat sink unless specified.
Step 1: Unpack the Camera
NOTE: To avoid scratches or leaving fingerprints on the dome cover, it is recommended to
retain the plastic covering the dome cover until the camera is completely installed.
1. Slide the mounting plate counter-clockwise to detach it from the camera.
2. Remove the silicon bag.
Hardware Manual
9
Step 2: Attach the Mounting Plate
NOTE: Before installation, consider the camera viewing angle and logo placement. The arrow
on the drill template and mounting plate align with the direction of the camera logo. Rotate the
drill template as needed.
1. Using the drill template, mark the holes on the surface. If necessary, drill the three (3)
screw holes and insert the plastic plugs.
2. Determine how the cable will be routed:
a. The cable will pass through a hole on the surface: In this case, drill the cable
hole based on the drill template.
b. The cable will go along the surface: Skip this step.
3. Attach the mounting plate on the surface using the three (3) supplied screws. Note that the
direction of the arrow on the mounting plate aligns with the camera logo.
NOTE: Make sure the screw is flat on the plate.
This arrow aligns with
the camera logo.
Rotate the template,
as needed.
Hardware Manual
10
Step 3: Connect the Cable
1. If the cable will pass through the hole on the surface, route the network cable through
the hole. If the cable will go along the surface, remove the cable exit tab on the camera
and route the cable along the surface.
Cable Passing Through a Hole on the Surface Cable GoingAlong the Surface
2. Connect the network cable to the Ethernet port of the camera.
Step 4: Attach the Fixing Bracket
This step is required only for FCS-3053, FCS-3063 camera models with cables going along
the surface. Otherwise, skip this step.
1. Route the cable to pass through the gap on the camera.
or
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de LevelOne
LevelOne
LevelOne FCS-5061 Manual de usuario
LevelOne
LevelOne FCS-4042 Instrucciones de uso
LevelOne
LevelOne FCS-5051 Manual de usuario
LevelOne
LevelOne FCS-1152 Instrucciones de uso
LevelOne
LevelOne FCS-5056 Manual de usuario
LevelOne
LevelOne FCS-1121 Manual de usuario
LevelOne
LevelOne CamCon FCS-4020 Manual de usuario
LevelOne
LevelOne FCS-4010 Manual de usuario
LevelOne
LevelOne CamCon WCS-2070 Manual de usuario
LevelOne
LevelOne FCS-3403 Manual de usuario
LevelOne
LevelOne FCS-0071 Manual de usuario
LevelOne
LevelOne FCS-4102 Manual de usuario
LevelOne
LevelOne CamCon FCS-1060 Manual de usuario
LevelOne
LevelOne FCS-4101 Manual de usuario
LevelOne
LevelOne FCS-3054 Instrucciones de uso
LevelOne
LevelOne GEMINI FCS-4051 Manual de usuario
LevelOne
LevelOne FCS-3071 Manual de usuario
LevelOne
LevelOne CamCon FCS-1070 Manual de usuario
LevelOne
LevelOne FCS-3102 Manual de usuario
LevelOne
LevelOne FCS-1030 Manual de usuario
