Leica DMS300 Manual de usuario

Leica DMS300

User Manual

Leica DMS300 User Manual 2

Contents

General Instructions

General Instructions 5

Important Safety Notes 6

Symbols Used 7

Safety Instructions 8

Introduction

Congratulations! 11

Standard Delivery 12

System Overview – Boom Stand Conﬁguration 13

Overview of the Instrument 14

System Overview – Standard Column Conﬁguration 15

Eﬀective Displayed Section 16

Assembly

LeicaDMS300 Swing-arm Stand 18

Baseplate and Vertical Column 18

Safety Ring and Horizontal Arm 19

10" Monitor 20

Microscope Carrier and LeicaDMS300 21

Objective Installation 22

Installing the Leica Ring Light 23

LeicaDMS300 With Incident Light Stand 25

Incident Light Base and Focusing Column 25

Microscope Carrier and LeicaDMS300 26

10" Monitor 27

Illumination: Installing the Leica LED3000 RL 28

Installation

HD Mode (Standalone) 31

Cables and Terminals, Activating HD Mode (Standalone) 31

PC Mode 32

Connecting a Computer, Installing Software, Activating PC Mode 32

Limitations in PC Mode 33

Startup Procedure

LeicaDMS300 35

Switching on the LeicaDMS300 35

Switching on the Illumination 36

Focusing, Adjusting the Resistance of the Focus Drive 37

Changing Magniﬁcation, Click-stop Feature 38

Remote Control 39

Pairing Cameras With Remotes 41

Conﬁguring the Front Button or Footswitch 42

Leica DMS300 User Manual 3

Contents (Continued)

Operation

HD Mode (Standalone) 45

Checking Cables and Terminals 45

Switching on the LeicaDMS300 46

Information About SD Memory Cards 47

Capturing Images Without a Computer 48

Displaying Images and Videos Without a Computer 49

White Balance 50

PC Mode 51

Checking Cables, Terminals and Software 51

Switching on the LeicaDMS300 52

Additional Use of a HD Monitor in PC Mode 53

User Menu

Calling up the User Menu 55

Automatic White Balance 56

Manual White Balance 57

Exposure 58

Resolution 59

Camera Settings 61

User-Deﬁned Settings 63

Setting the Overlay (SETUP OVERLAY) 65

Conﬁguring Predeﬁned Illumination Scenarios 67

Service

Care, Maintenance, Contact Persons 69

Spare Parts 72

Speciﬁcations

Technical Data 74

Optical Data 77

Dimensional Drawings 78

LeicaDMS300 78

Leica DMS300 With Incident Light Stand 79

LeicaDMS300 With Swing-arm Stand 80

Leica DMS300 User Manual General Instructions 4

General Instructions

Leica DMS300 User Manual General Instructions 5

General Instructions

Safety concept

Before using your Leica microscope for the ﬁrst

time, please read the "Safety Concept" booklet

included with your instrument. It contains addi-

tional information on handling and care.

Cleaning

ODo not use any unsuitable cleaning agents,

chemicals or techniques for cleaning.

ONever use chemicals to clean colored

surfaces or accessories with rubberized

parts. This could damage the surfaces,

and specimens could be contaminated by

abraded particles.

Servicing

ORepairs may only be carried out by Leica

Microsystems-trained service technicians.

Only original Leica Microsystems spare

parts may be used.

Responsibilities of person in charge of

instrument

OEnsure that the Leica microscope is oper-

ated, maintained and repaired by autho-

rized and trained personnel only.

Leica DMS300 User Manual General Instructions 6

Important Safety Notes

Instructions for Use

You can ﬁnd information on individual system

components on the interactive CD-ROM

together with all relevant user manuals in

additional languages. Keep it in a safe place,

and readily accessible to the user. User manu-

als and updates are also available for you

to download and print from our website

www.leica-microsystems.com.

This operating manual describes the special

functions of the Leica DMS300 digital micro-

scope system and contains important instruc-

tions for its operational safety, maintenance,

and accessories.

The "Safety Concept" booklet contains addi-

tional safety information regarding the service

work, requirements and the handling of the

microscope, accessories and electrical accesso-

ries as well as general safety instructions.

To maintain the unit in its original condition and

to ensure safe operation, the user must follow

the instructions and warnings contained in

these user manuals.

Leica DMS300 User Manual General Instructions 7

Symbols Used

Warning! Safety hazard!

•This symbol indicates especially impor-

tant information that is mandatory to

read and observe.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Warning of hazardous electrical voltage

This symbol indicates information that

must be read and observed.

Failure to comply can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Danger due to hot surface

This symbol warns against touching hot

surfaces, e.g. those of light bulbs.

Important information

This symbol indicates additional informa-

tion or explanations that are intended to

provide clarity.

Leica DMS300 User Manual General Instructions 8

Safety Instructions

Description

OThe individual modules fulﬁll the highest

requirements for observation and docu-

mentation with the Leica DMS300 digital

microscope system.

Intended Use

ORefer to "Safety Concept" booklet

Non-intended use

ORefer to "Safety Concept" booklet

Never use the LeicaDMS300 or its components

for surgical procedures (such as eye surgery)

since it is not intended for such use.

The instruments and accessories described in

this User Manual have been tested for safety and

potential hazards. The responsible Leica aﬃliate

must be consulted whenever the instrument is

altered, modiﬁed or used in conjunction with

non-Leica components that are outside of the

scope of this manual!

Unauthorized alterations to the instrument or

noncompliant use shall void all rights to any

warranty claims.

Place of use

ORefer to "Safety Concept" booklet

OElectrical components must be placed at

least 10 cm away from the wall and from

ﬂammable substances.

OAvoid large temperature ﬂuctuations, direct

sunlight and vibrations.

OIn warm and warm-damp climatic zones,

the individual components require special

care in order to prevent the build-up of

fungus.

Responsibilities of person in charge of

instrument

ORefer to "Safety Concept" booklet

Ensure that:

OThe Leica DMS300 digital microscope

system and accessories are operated, main-

tained and repaired by authorized and

trained personnel only.

OAll operators have read, understood and

observe this User Manual, and particularly

the safety regulations.

Leica DMS300 User Manual General Instructions 9

Safety Instructions (continued)

Repairs, service work

ORefer to "Safety Concept" booklet

OOnly original Leica Microsystems spare

parts may be used.

OBefore opening the instruments, switch oﬀ

the power and unplug the power cable.

OAvoid contact with powered electrical

circuits, which can lead to injury.

Transport

OUse the original packaging for shipping or

transporting the individual modules of the

Leica DMS300 digital microscope system

and the accessory components.

OIn order to prevent damage from vibrations,

disassemble all moving parts that (accord-

ing to the user manual) can be assembled

and disassembled by the customer and

pack them separately.

Integration in third-party products

ORefer to "Safety Concept" booklet

Disposal

ORefer to "Safety Concept" booklet

Legal regulations

ORefer to "Safety Concept" booklet

EC Declaration of Conformity

ORefer to "Safety Concept" booklet

Health risks

Workplaces with microscopes facilitate and

improve the viewing task, but they also impose

high demands on the eyes and holding muscles

of the user. Depending on the duration of unin-

terrupted work, asthenopia and musculoskel-

etal problems may occur. For this reason, appro-

priate measures for reduction of the workload

must be taken:

OOptimal arrangement of workplace, work

assignments and work ﬂow (changing tasks

frequently).

OThorough training of the personnel, giving

consideration to ergonomic and organiza-

tional aspects.

The ergonomic optics concept and the design

of the LeicaDMS300 digital microscope system

aim to limit the strain on the user to the lowest

possible level.

Leica DMS300 User Manual Introduction 10

Introduction

Tabla de contenidos

Otros manuales de Microscopio de Leica

Leica

Leica SP2 Manual de usuario

Leica

Leica Emspira 3 Manual de usuario

Leica

Leica DMi1 Manual de usuario

Leica

Leica M844 Manual de usuario

Leica

Leica SP8 AT CIAN Manual de lista de piezas

Leica

Leica M Manual de usuario

Leica

Leica Stellaris 8 FALCON Guía de instalación

Leica

Leica Z6 APO Manual de usuario

Leica

Leica SP8-X Manual de usuario

Leica

Leica M80 B Manual de usuario

Leica

Leica DVM6 Manual de usuario

Leica

Leica OH4 Manual de usuario

Leica

Leica DM6000 M Manual de usuario

Leica

Leica BM E Manual de usuario

Leica

Leica DM1000 LED Manual

Leica

Leica DM1000 LED Manual de usuario

Leica

Leica A60 S Manual de usuario

Leica

Leica MZ16 A Manual de usuario

Leica

Leica M125 C Manual de usuario

Leica

Leica A60 F Manual de usuario

Leica

Leica SP8 Guía de configuración

Leica

Leica Sp5 WLL STED Instrucciones de operación

Leica

Leica DMi8 A Manual de usuario

Leica

Leica EZ4 E Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Motic

Motic PA43 Manual de usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario

AO Cycloptic Manual de usuario

Celestron

Celestron 44345 Manual de usuario