LeCroy PP011 Manual de usuario

PP011-1 X

PP011-2

LeCroy PP011

Passive Probe

Instruction Manual

Revision A – October 2006

Warranty

LeCroy warrants this oscilloscope accessory for normal use and operation within specification for a period of one

year from the date of shipment. Spare parts, replacement parts and repairs are warranted for 90 days.

In exercising its warranty, LeCroy, at its option, will either repair or replace any assembly returned within the

warranty period to the Customer Service Department of an authorized service center. However, this will be done

only if the product is determined by LeCroy’s examination to be defective because of workmanship or materials,

and the defect is not caused by misuse, neglect, accident, abnormal conditions of operation; or, damaged by

attempted repair or modifications by a non-authorized service facility.

The customer will be responsible for the transportation and insurance charges for the return of products to the

service facility. LeCroy will return all products under warranty with transportation charges prepaid.

This warranty replaces all other warranties, expressed or implied, including, but not limited to, any implied warranty

of merchantability, fitness, or adequacy for any particular purposes or use. LeCroy shall not be liable for any

special, incidental, or consequential damages, whether in contract or otherwise.

Corporate Headquarters

700 Chestnut Ridge Road

Chestnut Ridge, NY 10977-6499

Tel: (845) 425-2000 Fax: (845) 425-8967

Internet: www.lecroy.com

LeCroy, ActiveDSO, ProBus, SMART Trigger, JitterTrack, WavePro, WaveMaster, WaveSurfer, and Waverunner

are registered trademarks of LeCroy Corporation. Other product or brand names are trademarks or requested

trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications

subject to change without notice.

Manufactured under an ISO 9000

Registered Quality Management

System

Visit www.lecroy.com to view the

certificate.

This electronic product is subject

to disposal and recycling

regulations that vary by country

and region. Many countries

prohibit the disposal of waste

electronic equipment in standard

waste receptacles.

For more information about proper

disposal and recycling of your

LeCroy product, please visit

www.lecroy.com/recycle.

PP011-OM-E Rev A

914602-00 Rev A

2 PP011-OM-E Rev A

Safety Information

This symbol appears on the product:

It refers you to additional information contained in this manual. The corresponding information in the manual is

similarly denoted.

To avoid personal injury and to prevent fire or damage to the probe or any products connected to it, review and

comply with the following safety precautions.

Connect to properly grounded instruments. This probe is to be used only with test instruments having input

connectors with the BNC shield (ring) connected to earth ground.

Connect the probe properly:

Connect the probe to the measurement instrument before connecting the probe to test circuit. Do not

disconnect the probe from the test instrument while the input is connected to the test circuit.

Do not connect the probe ground terminal to any point in the test circuit which is at a potential other than earth

ground.

Do not apply any potential to the input which exceeds the maximum ratings of the probe.

Comply with the voltage derating curve. When measuring high frequency signals, be sure to comply with the

Voltage vs. Frequency derating curve found on page 5.

Do not use in wet or explosive atmospheres.

For indoor use only. This probe is intended for indoor use and should be operated in a clean, dry environment.

Do not use the probe if any part is damaged. All maintenance should be referred to qualified service personnel.

Avoid physical injury. The probe tip is extremely sharp. Use care when handling to prevent injury, including

accidental skin puncture.

Use of the probe and/or the test instrument it is connected to in a manner not specified by the manufacturer may

impair the protection mechanisms.

PP011-OM-E Rev A 3

Introduction

The PP011 is a miniature high impedance passive probe. Its high input resistance and low capacitance make it

ideal for general purpose probing of signals with frequency content from DC through several hundred MHz. The

PP011 has a large selection of connection accessories, supplied standard with the probe and available from

LeCroy as optional accessories.

The PP011 is designed for use with > 600 MHz LeCroy WaveSurfer oscilloscopes.

Specifications

Electrical Characteristics

Attenuation 10:1 ±1%

Input Resistance 10 MΩ±1%

Input Capacitance 9.5 pF

Input Impedance (see plot on page 5.)

Compensation Range 10 – 20 pF

Bandwidth 500 MHz (-3 dB)

Electrical Ratings

Maximum Input Voltage Measurement category I: 400 Vrms,

1250 V transient overvoltage

(see voltage derating curve on page 5)

Measurement category II: 300 Vrms CAT II

Pollution Degree 2

Measurement category I is for measurement performed on circuits not directly connected to a mains supply.

Measurement category II (CAT II) is for measurement performed on circuits directly connected to a low voltage

installation. This refers to local distribution level, applicable to equipment connected to the mains (AC power

source) through a power cable.

Pollution Degree 2 refers to an operating environment where normally only dry non-conductive pollution occurs.

Occasionally a temporary conductivity caused by condensation must be expected.

4 PP011-OM-E Rev A

Specifications (continued)

General Characteristics

Operating Temperature 0oto +50oC

Storage Temperature -40oto +71oC

Altitude, Operating up to 2000 m (6560 ft)

Cable Length 1.3 m

Weight (probe only) 46 g

Max. VIN versus Frequency, Typical Input Impedance

Measurement category I

PP011-OM-E Rev A 5

Certifications

This probe is designed to conform to 73/23/EEC + amendment 93/68/EEC Low Voltage Directive (LVD) per the

following standards:

CEI/IEC 61010-031:2002-01 Safety requirements for electrical equipment for measurement control and laboratory

use:

Part 031: Safety requirements for hand-held probe assemblies for electrical

measurement and test.

Frequency (Hz)

100 K 1 M 10 M

VIN

(Vrms)

150

250

350

400

300

200

100

ZIN

(Ω)

100 k

10 M

1 M

10 k

1 k

100

Frequency (Hz)

1 k 1 M 100 M

100 M

Connectivity Accessories

LeCroy provides 24 individual accessories for the PP011 probe, which enable reliable connections to any physical

requirement. In addition to those provided with the standard probe, several optional varieties are available either

individually, or grouped in sets related to specific application needs.

The PK005A series of connectivity accessories are compatible with any LeCroy 5 mm PP011 series probe.

Accessories are shown with the LeCroy part number followed by the description.

Standard Accessories

PK1-5MM-101 PK1-5MM-102 PK1-5MM-103

Sprung Hook Standard Ground Lead Adjustment Tool

PK1-5MM-104 PK1-5MM-105 PK1-5MM-106

Rigid Tip, 0.8 mm Insulating Cap Color Coding Rings (set)

(Not shown) Protective Cap

PP011-OM-E

Instruction Manual

6 PP011-OM-E Rev A

Optional Accessories

PK1-5MM-109 PK1-5MM-124 PK1-5MM-108 PK1-5MM-118

Spring Tip, 0.8 mm Spring Tip, 0.38 mm IC Cap, 2.54 mm pitch Ground Spring

Input Adapters and Clips

PK1-5MM-111 PK1-5MM-112 PK1-5MM-116 PK1-5MM-117

Single Lead Adapter Dual Lead Adapter Adapter, 2 mm plug Adapter, 4 mm plug

PK1-5MM-113 PK1-5MM-114Y PK1-5MM-115Y

Pico Hook™ PK1-5MM-114G PK1-5MM-115G

Micro Clip, Long Micro Clip, Short

PP011-OM-E Rev A 7

PK1-5MM-110

BNC Adapter

PCB Adapter (For low voltage use only ≤42 Vpk AC + DC)

n circuit

boards to e, high frequency test point which eliminates the need to hand hold the probe.

Probe connected using PCB Adapter PC Board hole size and pattern

K1-5MM-107

Use of PCB Adapter

The PCB adapter (LeCroy P/N PK1-5MM-107) is intended to be designed into and permanently installed i

provide a reliabl

1.5 mm

(0.059”) 1.0 mm x 4

(0.039”)

5.8 mm

(0.200”)

8 PP011-OM-E Rev A

Ground Leads

PK1-5MM-119 PK1-5MM-120 PK1-5MM-121

Ground Lead with mini clip Ground Lead with 8 mm socket Ground Lead with 2 mm plug

PK1-5MM-122 PK1-5MM-123*

Ground lead with 4 mm plug High Frequency Compensated Ground Lead

*The PK1-5MM-123 High Frequency compensated ground lead allows operation with long ground lead with

minimum signal distortion.

PP011-OM-E Rev A 9

10 PP011-OM-E Rev A

Probe Connectivity Kits

The following kits containing an assortment of probe connection accessories can be ordered directly from LeCroy.

Refer to the illustrations on pages 6-9 for identification.

PKIT1-5MM-102 Basic Adapter Kit replaces the common standard accessories, with 1 each of PK1-5MM-110,

PK1-5MM-104, PK1-5MM-103, PK1-5MM-108, PK1-5MM-117, PK1-5MM-101, PK1-5MM-102, PK1-5MM-118,

PK1-5MM-123; 6 each of PK1-5MM-109; and 5 each of PK1-5MM-124.

PKIT1-5MM-101 Micro Clip Kit adapts the probe for use with 0.5 mm IC lead clips. It contains 1 each of PK1-

5MM-115Y, PK1-5MM-115G, PK1-5MM-114Y, PK1-5MM-114G, PK1-5MM-111.

Use and Maintenance

This probe is a high quality, precision instrument. To maintain accuracy and signal fidelity, mechanical shock

should be avoided, as well as damage to the cable through excessive bending.

Avoid placing excessive force sideways on the tip.

Should the tip become damaged, it may be replaced by the user using the procedure listed on the last page.

Other maintenance and component replacement should be referred to qualified personnel.

Cleaning

The outside of the probe should be cleaned with a soft cloth dampened with either deionized / distilled water or

isopropyl alcohol. Allow the surface to dry completely before returning the probe to service. Never immerse the

probe in any liquid.

Tabla de contenidos

Otros manuales de Equipo de prueba de LeCroy

LeCroy

LeCroy WaveMaster 8 Zi Manual de lista de piezas

LeCroy

LeCroy WaveAce series Manual de lista de piezas

LeCroy

LeCroy WaveRunner 6000A Series Manual de usuario

LeCroy

LeCroy WaveRunner Xi-A Manual de lista de piezas

LeCroy

LeCroy Xs-A Manual de usuario

LeCroy

LeCroy ADP300 Manual de usuario

LeCroy

LeCroy WaveRunner XI Series Manual de usuario

LeCroy

LeCroy WaveMaster 8 Zi Manual de lista de piezas

LeCroy

LeCroy WaveJet 300A series Manual de usuario

LeCroy

LeCroy 9300C Series Manual de usuario

LeCroy

LeCroy WaveAce 202 Manual de usuario

LeCroy

LeCroy WaveSurfer MXs-B Manual de lista de piezas

LeCroy

LeCroy WAVERUNNER 6000 SERIES Manual de usuario

LeCroy

LeCroy LC Series Manual de usuario

LeCroy

LeCroy LSA1000 Manual de usuario

LeCroy

LeCroy WaveSurfer MXs-B Manual de usuario

LeCroy

LeCroy WaveJet 300A series Manual de usuario

LeCroy

LeCroy WaveAce 1000 series Manual de usuario

LeCroy

LeCroy WaveMaster 8 Zi Manual de lista de piezas

LeCroy

LeCroy WaveAce PP013 Manual de usuario

LeCroy

LeCroy 4300B Manual de usuario

LeCroy

LeCroy 9450 Manual de usuario

LeCroy

LeCroy WaveSurfer 400 Series Manual de usuario

LeCroy

LeCroy MS-500 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario