Laufen SENTEC Guía de configuración

CLEANING

INSTRUCTIONS

FOR SENTEC

& MARBOND

EVERYDAY

CLEANING

The surface gathers hardly any dirt and is easy to

clean and maintain. It is recommended to clean any

kind of dirt as soon as it appears in order to keep

the product in its best condition.

Avoid using scouring agents with grains or solvents,

which may damage the surface of the product.

Do not use strong acidic cleaning agents or vinegar-

based cleaning agents. Please use agents with

a pH value between 3 and 8 to make sure not to harm

the surface. A light solution can be used

on resistant stains or limescale. Before using new

cleaning agents please try them on small areas

of the product rst.

Most of the stains caused by everyday use can be

removed using products dedicated for Solid Surface

and Acrylic surfaces, applied with a soft damp cloth

(i.e. cotton or microbre) or soft paper-towel.

Rust and limescale can be removed by using

a damp cloth with a cleaning agent dedicated

for this kind of stains.

After applying any cleaning product, rinse all areas

thoroughly with warm water in order to remove the

detergent and dry all wet surfaces with soft cotton

or microbre cloth.

RESISTANT

STAINS

Resistant stains caused by cosmetics, coee,

wine, cigarette ash, detergents, nail polish and

hair dye should be removed immediately with a soft

cloth. Afterwards, clean the stains in the same way as

with daily care. It is recommended to use the cleaning

agent only with soft cotton or microbre cloth. Please

be aware that any scratching materials (e.g. scotch

brite) should not be used on Marbond material.

If your product is made from Sentec you can use

a scotch brite and cleaning cream without grains

to clean stains. This cleaning process should be

performed on the entire surface of the product,

in series of movements: right-left, up-down, diagonal

and circular for nishing. Please remove extremely

persistent stains with the polishing machine.

In this case it is recommended to contact authorized

service technicians.

REMOVAL OF SCRATCHES

PRODUCT REFURBISHMENT

Scratches on Sentec material can be removed

using a scotch brite and plain cleaning cream

or a polishing machine. Follow the same cleaning

process as for stains. When using the polishing

machine, please contact authorized service

technicians.

One of the advantages of Sentec and Marbond

is that the material is renewable. In case of deep

damages, both materials allow the product

to be restored to its original appearance.

This service requires an appropriate repair-kit

(available upon order) and is to be provided by

authorized service technicians.

GENERAL

REMARKS

Any material that is improperly used or poorly

maintained may be damaged. Damage resulting

from inappropriate treatment by the user will not

be covered by our guarantee. The most common

problems resulting in the loss of warranty

services may arise as a result of:

_ Use of aggressive chemicals

(e.g. acetone-based agents, aggressive

solvents, drain cleaners, etc.)

_ Contact of the product with

strong chemicals, boiling liquids

and hot objects

_ Mechanical damage,

in particular impacts or scratches

with a sharp object

Acid Rinse with water Rinse with water

Alkalines Clean with scotch brite Rinse with water

Alcohols Clean with scotch brite Rinse with water

Bleaches Rinse with water Rinse with water

SENTEC: HOW TO CLEAN? MARBOND: HOW TO CLEAN?CHEMICALS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bañera de Laufen

Laufen

Laufen ILBAGNOALESSI H220972 Manual de usuario

Laufen

Laufen PALOMBA Manual de usuario

Laufen

Laufen MEDA 2.2011.2.000.000.1 Manual de usuario

Laufen

Laufen IL BAGNO ALESSI 2.4197.0 Manual de usuario

Laufen

Laufen MIMO Manual de usuario

Laufen

Laufen ALESSI 2.4597.2 Manual de usuario

Laufen

Laufen MEDA 2.2011.5 Manual de usuario

Laufen

Laufen MYLIFE 185 Manual de usuario

Laufen

Laufen VAL 2.3028.2.000.000.1 Manual de usuario

Laufen

Laufen SOLUTIONS 2.2250.1 Manual de usuario

Laufen

Laufen IL BAGNO ALESSI ONE 8.1397.1 Manual de usuario

Laufen

Laufen SOLUTIONS 2.2250.1 Manual de usuario

Laufen

Laufen ILBAGNOALESSI ONE 2.4197.0 Manual

Laufen

Laufen PALOMBA 2.3180.0 Manual de usuario

Laufen

Laufen Kartell 2.2233.2 Manual de usuario

Laufen

Laufen Kartell 2.2233.2 Manual de usuario

Laufen

Laufen PRO 2.3295.5.000.615.1 Manual de usuario

Laufen

Laufen Sonar Marbond Manual de usuario

Laufen

Laufen PALOMBA 2.3180.0 Manual de usuario

Laufen

Laufen ALESSI 2.4597.2.000.000.A Manual de usuario

Laufen

Laufen MEDA 2.2011.7.000.000.1 Manual de usuario

Laufen

Laufen LIVING Manual de usuario

Laufen

Laufen VAL 2.3128.2.000.000.1 Manual de usuario

Laufen

Laufen SONAR 2.2034.7.000.000.1 Manual de usuario

Manuales populares de Bañera de otras marcas

Agua

Agua BARTOLI-66 Manual de usuario

PAA

PAA PRELUDE Manual de usuario

BETTE

BETTE SILHOUETTE Manual de usuario

Kohler

Kohler K-820-GC Guía de inicio rápido

American Standard

American Standard Whirlpool/Bathing Pool 2748.XXXW Manual de usuario

Oliveri

Oliveri Naples Manual de usuario

Lyons

Lyons Elite ETLxx663219 Series Manual de usuario

Woodbridge

Woodbridge BJ500 Instrucciones de montaje

Whirlpool

Whirlpool Ariel ARL-702 Manual de usuario

TEIKO

TEIKO EXCELLENT DUO Manual de usuario

American Standard

American Standard Colony 5-1/2' x 32" Manual de usuario

American Standard

American Standard 3052OD.X0X Guía de inicio rápido

Kohler

Kohler K-1111-H2 Guía de inicio rápido

agape

agape MARSIGLIA AVAS1075 Manual de usuario

Kohler

Kohler K-1151 Instrucciones de montaje

Kohler

Kohler K-1158 Guía de inicio rápido

Kohler

Kohler K-1244 Instrucciones de montaje

Kallista

Kallista P50045-G5 Instrucciones de montaje