Lantronix Xpress-Pro SW 94000 Manual de usuario

Part Number 900-506a 1

May 2007

XPress-Pro SW 94000 Quick Start

This quick installation guide describes how to install and use the hardened managed compact Ethernet Switch. Capable of operating at temperature

extremes of -34°C to +74°C, this is the switch of choice for harsh environments constrained by space.

Physical Description

The Terminal Block and Power Inputs

The Terminal Block

PWR1 Power Input 1 (+24VDC)

GND Power Ground

PWR2 Power Input 2 (+24VDC)

GND Power Ground

Earth Ground

FAULT The relay opens if PWR1 or PWR2

fails (1A)

The DC Power Inputs

12VDC DC JACK

FAULT The relay opens if PWR1 or PWR2

fails (1A)

DC Terminal Block Power Inputs: There are two pairs of power inputs can be used to power up this media converter. Redundant power supplies function is

supported. You only need to have one power input connected to run the Switch.

The 10/100BaseTX, 10/100/1000TX, 100BaseFX, and 1000BaseSX/LX Connectors

The 10/100BaseTX Connections

The following lists the pinouts of 10/100BaseT/TX ports.

Pin Regular Ports Uplink port

1 Input Receive Data + Output Transmit Data +

2 Input Receive Data - Output Transmit Data -

3 Output Transmit Data + Input Receive Data +

4 NC NC

5 NC NC

6 Output Transmit Data - Input Receive Data -

7 NC NC

8 NC NC

The 10/100/1000BaseTX Connections

The following lists the pinouts of 10/100/1000BaseTX ports.

Pin Ports

1 A+

2 A-

3 B+

4 C+

5 C-

6 B-

7 D+

8 D-

The 100BaseFX & 1000BaseSX/LX Connections

The fiber port pinouts

The Tx (transmit) port of device I is connected to the Rx (receive) port of device II,

and the Rx (receive) port of device I to the Tx (transmit) port of device II.

The Port Status LEDs

LED State Indication

10/100TX or 100FX

Steady A valid network connection established. LNK stands for LINK.

LNK/ACT

(Green) Flashing Transmitting or receiving data. ACT stands for ACTIVITY.

Steady Light solid yellow for a port transferring at 100Mbps.

100

(Yellow) Off The port is transferring at 10Mbps If this LED is dark.

10/100/1000TX, 1000SX/LX

Steady Light solid green for a port transferring at 1000Mbps.

LNK

(Green) Off The port is not transferring at 1000Mbps If this LED is dark.

Flashing Transmitting or receiving data. ACT stands for ACTIVITY.

ACT

(Yellow) Off Neither transmitting nor receiving data.

Functional Description

Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for traffic control equipment.

Meets IEC61000-6-2 EMC Generic Standard Immunity for industrial environment.

Manageable via SNMP, Web-based, Telnet, and RS-232 console port.

Support 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 10/100Mbps, full/half-duplex; Auto MDI/MDIX.

100BaseFX: Multi mode SC, ST, VF-45, MT-RJ, or LC type; Single mode SC or ST type; WDM Single mode SC type.

1000BaseSX/LX: Multi mode or Single mode SC type.

Support 4K MAC addresses. Provides 256K bytes memory buffer.

Alarms for power failure by relay output.

Operating voltage and Max. current consumption: 12VDC @ 1.48A, 24VDC @ 0.77A. Power consumption: 18.48W Max.

Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC JACK with 124-240VAC external power supply.

Operating temperature ranges from -34℃to 74℃.

Supports Din-rail or panel mounting installation.

Assembly, Startup, and Dismantling

Assembly: Place the switch on the DIN rail from above using the slot. Push the front of the switch toward the mounting surface until it audibly

snaps into place.

Startup: Connect the supply voltage to start up the switch via the terminal block (or DC JACK).

Dismantling: Pull out the lower edge and then remove the switch from the DIN rail.

Otros manuales para Xpress-Pro SW 94000

Tabla de contenidos

Otros manuales de Cambiar de Lantronix

Lantronix

Lantronix SESPM1040-541-LT Series Manual de usuario

Lantronix

Lantronix SLS200USB0-02 Manual de usuario

Lantronix

Lantronix LFH8-S Manual de usuario

Lantronix

Lantronix SISTG1040-2 2-LRT Series Manual de usuario

Lantronix

Lantronix SM24T6DPA Manual de usuario

Lantronix

Lantronix SISPM1040-2248-L3 Manual de usuario

Lantronix

Lantronix SISPM1040-3 L Series Manual de usuario

Lantronix

Lantronix MINI FAST LFH4-M Manual de usuario

Lantronix

Lantronix Xpress-Pro SW 52000 Manual de usuario

Lantronix

Lantronix Xpress-Pro SW 92000 Manual de usuario

Lantronix

Lantronix 300.000.4000 Manual de usuario

Lantronix

Lantronix S8TB Manual de usuario

Lantronix

Lantronix SM24TBT2DPA Manual de usuario

Lantronix

Lantronix SISGM1040-284-LRT Manual de usuario

Lantronix

Lantronix Series 1000 Manual de usuario

Lantronix

Lantronix SM8TAT2SA-DC Manual de usuario

Lantronix

Lantronix SISTP1040-551-LRT Manual de usuario

Lantronix

Lantronix SecureLinx Spider Manual de usuario

Lantronix

Lantronix SISPM1040-582-LRT Manual de usuario

Lantronix

Lantronix SESPM1040-541-LT Series Manual de usuario

Lantronix

Lantronix LMS8-A Manual de usuario

Lantronix

Lantronix SISPM1040-582-LRT Manual de usuario

Lantronix

Lantronix SLC 8000 Series Manual de usuario

Lantronix

Lantronix SM TAT2SA Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario