Lantech IPGS-0005T-4-12V Manual de usuario

Lantech

IPGS-0005T-4

4 10/100/1000T PoE at + 1 1000T Industrial Unmanaged Switch

User Manual

V1.01

Sep 2021

Content

Overview............................................................1

Introduction .............................................................. 1

Features / Model List................................................2

Packing List..............................................................3

Safety Precaution.....................................................3

Hardware Description.........................................4

Dimensions .............................................................. 4

Wiring the Power Inputs...........................................5

Wiring the Fault Alarm Contact ................................ 6

LED Indicators..........................................................7

RJ-45 Pin Assignments............................................ 9

Cabling...................................................................11

Mounting Installation........................................12

DIN-Rail Mounting.................................................. 12

Wall-Mount Plate Mounting (Optional)...................14

Hardware Installation .......................................15

Installation Steps....................................................16

Troubleshooting ...............................................17

Recommendation for Shielded network

cables

STP cables have additional shielding material that is used to reduce external

interference. The shield also reduces the emission at any point in the path of the cable.

Our recommendation is to deploy an STP network cable in demanding electrical

environments. Examples of demanding indoor environments are where the network

cable is located in parallel with electrical mains supply cables or where large inductive

loads such as motors or contactors are in close vicinity to the camera or its cable. It is

also mandatory to use an STP cable where the power device (like IP camera) is used

outdoors or where the network cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the

interest of improving performance, reliability, or servicing. At the time of

publication all data is correct for the operation of the equipment at the

voltage and/or temperature referred to. Performance data indicates typical

values related to the particular product.

No part of this documentation or information supplied may be divulged to

any third party without the express written consent of Lantech

Communications Global Inc. Products offered may contain software which

is proprietary to Lantech Communications Global Inc. The offer or supply of

these products and services does not include or infer any transfer of

ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a commercial or industrial installation. This equipment generates, uses,

and can radiate radio frequency energy. It may cause harmful interference

to radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Overview

Introduction

The unmanaged industrial switch is a cost-effective solution and meets

the high reliability requirements demanded by industrial applications.

High-Speed Transmissions

The Industrial switch includes a switch controller that can automatically

sense transmission speeds (10/100/1000 Mbps). The RJ-45 interface

can also be auto-detected, so MDI or MDI-X is automatically selected

and a crossover cable is not required. All Ethernet ports have memory

buffers that support the store-and-forward mechanism. This assures that

data is properly transmitted.

Dual Power Inputs

To reduce the risk of power failure, the Industrial switch provides dual

power inputs. When power failure occurs, the device will automatically

switch to the secondary power input.

Flexible Mounting

The industrial switch is extremely compact and can be mounted on a

DIN-rail or a panel, so it is suitable for any space-constrained

environment.

Wide Operating Temperature

The operating temperature of the Industrial switch is in the range

between -40 ~ 75oC. With such a wide range, you can use the Industrial

switch in some of the harshest industrial environments that exist.

Easy Troubleshooting

LED indicators make troubleshooting quick and easy. Each

10/100/1000T port has 2 LED indicators that display the link status,

transmission speed and collision status. Also other LED indicators help

you diagnose the system immediately.

Features / Model List

Store-and-Forward switching architecture

8K MAC address table

Supports full/half duplex flow control

IEEE 802.3at/af PoE+ standard (PoE models)

Supports MDI/MDI-X auto-crossover

Relay contact to connect with alarm system

Provides flexible mounting: DIN-rail, Panel Mounting*

Model Name

10/100/1000T

Power

Supply

Operating

Temperature

IPGS-0005T-4-12V

5 (PoE x4)

9.5~56VDC

-40 ~ 75℃

IPGS-0005T-4-48V

5 (PoE x4)

44~56VDC

-40 ~ 75℃

*Optional

Packing List

1 x Industrial Ethernet Switch (w/ terminal block and DIN-Rail kit)

Caps for RJ45-port

Safety Precaution

Attention

If DC voltage is supplied by an external circuit, please use a

protection device on the power supply input.

Hardware Description

In this paragraph, we will introduce the Industrial switch’s dimensions,

port, cabling information, and wiring installation.

For PoE models: If this switch needs to uplink with another switch

via a PoE copper port, please make sure the uplink port on the other

unit is a none-PoE interface. You may also contact our sales team to

confirm if the switch supports power isolation.

For PoE 48V models, the output voltage of power supply must

exceed 48VDC for 802.3af and 53VDC for 802.3at operation.

Dimensions

43 x 152 x 105 mm (W x H x D)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Lantech

Lantech

Lantech IPES-3424DSFP-2P Manual de usuario

Lantech

Lantech LGS-2404 Manual de usuario

Lantech

Lantech IGS-0208GSFP Manual de usuario

Lantech

Lantech IGS-0008A Manual de usuario

Lantech

Lantech IES-2008B-DNV Manual de usuario

Lantech

Lantech Treo 500 Manual de usuario

Lantech

Lantech mini Switch 800 Manual de usuario

Lantech

Lantech IPES-0208 Series Manual de usuario

Lantech

Lantech TGS-R6616XFT Manual de usuario

Lantech

Lantech TES-R6616XFT Manual de usuario

Lantech

Lantech LGS-2816C-RPS Manual de usuario

Lantech

Lantech LGS-1104 Manual de usuario

Lantech

Lantech IPES-0008A Series Manual de usuario

Lantech

Lantech IGS-2206C Manual de usuario

Lantech

Lantech LPGS-2424C Series Manual de usuario

Lantech

Lantech IES-3208C Manual de usuario

Lantech

Lantech IES-22812F-2P Manual de usuario

Lantech

Lantech IGS-0016 Manual de usuario

Lantech

Lantech IPES-5408T-43 Manual de usuario

Lantech

Lantech IES-2208C Manual de usuario

Lantech

Lantech IPWMR-3204DF Manual de usuario

Lantech

Lantech LPES-2208CA Manual de usuario

Lantech

Lantech IPES-0204DFT-4 Manual de usuario

Lantech

Lantech IES-0005B Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario