LaCie D2 BLU-RAY XL Manual de usuario
d2 USB 3.0 User Manual 2
INTRODUCTION
Welcome to the User Manual for the LaCie d2 USB 3.0. Your
LaCie hard drive features SuperSpeed USB 3.0, giving you the
potential to reach transfer rates up to 5Gb/s. In addition to fast
data transfers with computers that support USB 3.0, the LaCie
d2 is compatible with the widely available USB 2.0 for universal
connectivity.
These pages will guide you through the process of connecting your LaCie product. If you have questions
regarding the installation or, how to use your LaCie hard drive, consult the Getting Help page.
BOX CONTENT
LaCie d2
■
USB 3.0 cable (USB 2.0 compatible)
■
Power supply
■
Quick Install Guide
■
Important info: Save your packaging. In the event that the hard drive should need to be repaired or
serviced, it must be returned in its original packaging.
d2 USB 3.0 User Manual 3
Software suite
During installation, you have the option to install the following software utilities:
Intego® Backup Assistant (Mac®)
■
LaCie Genie® Timeline (Windows®)
■
LaCie Desktop Manager (provides system information, one-touch shortcut, and power-saving management)
■
LaCie Private-Public (protect data with AES 256-bit encryption)
■
MINIMUM SYSTEM REQUIREMENTS
Your system must meet certain requirements in order for your LaCie product to function properly. For a list of
these requirements, please refer to the product packaging or consult the product support web page at
www.lacie.com/support/.
d2 USB 3.0 User Manual 6
QUIET OPERATION AND HEAT MANAGEMENT
To reduce noise during operation, the LaCie d2’s built-in stand features vibration-dampening rubber feet.
Additionally, the LaCie d2’s metal casing dissipates heat from the drive, allowing for noiseless, fan-free cooling.
Since LaCie's unique design draws heat away from the internal hard drive, the external casing will be warm to
the touch after extended use.
The LaCie d2’s specially constructed exterior can prolong the life of its hard drive via the fan-free cooling
system. To protect the hard drive from external forces, the LaCie d2 also includes rubber anti-shock disk mounts
within the enclosure.
POSITION AND STACKING
Always make certain to place the LaCie d2 on a flat, even surface that can support the heat output and airflow
of a professional hard drive enclosure. For proper heat dissipation, the LaCie d2 is designed to stand on its stand.
DO NOT place the enclosure on its side when it is powered on.
The LaCie d2 is does not support stacking. Doing so poses a severe risk that it will fall. DO NOT stack other
drives, enclosures, or equipment on top of the LaCie d2.
The warranty for your LaCie d2 will be voided if you:
Stack the LaCie d2 enclosure on another device.
■
Stack other drives, enclosures, or equipment on top of the LaCie d2.
■
d2 USB 3.0 User Manual 7
TECHNICAL SPECIFICATIONS
Power supply
100-240V; 50/60Hz; 18W
Dimensions
Width Depth Height
60 mm / 2.4 in 190 mm / 7.5 in 130 mm / 5.1 in
Weight
Capacity Weight
3TB 1.2 Kg / 2.6 lbs
4TB 1.3 Kg / 2.8 lbs
6TB 1.4 Kg / 3.0 lbs
d2 USB 3.0 User Manual 8
LED POWER BUTTON
Your LaCie hard drive features a multi-functional LED on the front of the drive.
LED STATES
LED Behavior State
Off The product is turned off; the USB cable is not connected to a computer that is turned
on and/or the power cable is not connected to a live power outlet.
30s off, flash blue,
30s off, etc.
The product is in power-saving mode due to one of the following: its volumes have
been unmounted on the host computer; the host computer placed it into sleep mode;
or, the host computer is in sleep mode.
Solid blue The product is turned on and the hard drive is ready for access.
Flickering During normal operation, the LED flickers to indicate access to the hard drive.
Receiving power
The LaCie d2 powers on automatically when it is:
Connected directly to a computer via the USB port. The computer must be powered on.
■
Connected to a live power source via the included power supply.
■
Note on the USB 3.0 connection: The LaCie d2 can be connected to a USB 2.0 port on your computer. To
take advantage of SuperSpeed USB 3.0 transfer rates, you must connect the enclosure to a computer with a
USB 3.0 port.
d2 USB 3.0 User Manual 9
LED BUTTON
The LED is a button that can be used to power off/on the LaCie d2.
Power off
Follow the steps below to turn the device off:
Make certain that the LaCie d2’s volumes are not being accessed.1.
Eject the LaCie d2’s volumes. See Unmounting Your Hard Drive for instructions. Once the volumes have been2.
properly ejected, the LaCie d2 enters power-saving mode.
Apply a long press, a minimum of four seconds, to the LED button. The LED turns solid blue before turning off.3.
Power on
In most instances, the LaCie d2 powers on automatically when connected to a computer and an active power
source. However, the LED button can be used to power on the device if the following two conditions are met:
The LaCie d2 was powered off using a long press
■
The LaCie d2 remains connected to the computer’s USB port and an active power source
■
To power on the LaCie d2, push the LED button for one second.
d2 USB 3.0 User Manual 10
Power-saving mode
Your LaCie d2 can conserve energy by entering power-saving mode. When the LaCie d2 is in power-saving mode
or, eco mode, the hard drive within the enclosure spins down to reduce power consumption. Power-saving mode
can extend the life of the hard drive by sparing it from working during extended periods of inactivity.
You can initiate power-saving mode by performing one of the following:
Place the host computer into sleep mode.
■
Mac: Go to System Preferences > Energy Saver to enable sleep mode for hard drives.
■
Windows: Run LaCie Desktop Manager (see LaCie Desktop Manager) to configure power-saving/eco mode.
■
To exit power-saving mode, review the table below:
Entering power-saving mode Exiting power-saving mode
The host computer placed the product into
power-saving mode due to inactivity.
Access the LaCie d2’s volume on the host computer.
For example, copy files to its volume.
The computer is in sleep mode. Wake up the computer.
Windows only: LaCie Desktop Manager put the
product to sleep due to inactivity.
Access the LaCie d2’s volume on the host computer.
For example, copy files to its volume.
Note on ejecting the volume and power-saving mode: The LaCie d2 enters power-saving mode when
its volumes are ejected. To access the LaCie d2’s volumes, unplug the USB cable from the back of the device
and reconnect it.
Otros manuales para D2 BLU-RAY XL
14
Tabla de contenidos
Otros manuales de Almacenamiento de LaCie
LaCie
LaCie rikiki 301949 Manual de usuario
LaCie
LaCie 301939 Manual de usuario
LaCie
LaCie 301838U Manual de usuario
LaCie
LaCie Mobile Hard Drive Manual de usuario
LaCie
LaCie 301894 Manual de usuario
LaCie
LaCie 2big Quadra USB 3.0 Manual de usuario
LaCie
LaCie 301371 - Rugged Hard Disk 500 GB External... Manual de usuario
LaCie
LaCie Big Disk Extreme Manual de usuario
LaCie
LaCie LaCie Ethernet Big Disk Manual de usuario
LaCie
LaCie STFS500400 Manual de usuario
LaCie
LaCie 301542U Manual de usuario
LaCie
LaCie 300718 Manual de usuario
LaCie
LaCie 301881U Manual de usuario
LaCie
LaCie MosKeyto Manual de usuario
LaCie
LaCie Internet Space 2 Manual de usuario
LaCie
LaCie Rugged USB-C series Manual de usuario
LaCie
LaCie LITTLE DISK USB 2.0 Manual de usuario
LaCie
LaCie Biggest Quadra Manual de usuario
LaCie
LaCie Two Big Manual de usuario
LaCie
LaCie LaCinema PlayHD Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Thunderbolt
Thunderbolt 600 Manual de usuario
Panasonic
Panasonic LB-DH8 series Manual
Intel
Intel RAID High Availability Manual de usuario
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
