When batteries of dierent brand or type are used together, or new and old
batteries are used together, some batteries may be
over-discharged due to a dierence of voltage or capacity. This can result in
venting, leakage, and rupture and may cause personal injury.
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of dierent types.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone directory for
local recycling centers and/or follow local government regulations.
CARE & MAINTENANCE
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the
Movement (Alkaline recommended)
Optional Moving Gears: 3 AA (IEC, LR6, 1.5V) batteries into the
Moving Gear compartment.
Battery Life: Over 12 months for the clock
Dimensions: 15.12” x 2.55” x 15.12” (38.5cm x 6.5cm x 38.5cm
Movement: Step
Lens: Glass
SPECIFICATIONSPOWER UP
1. Pull up on the OPEN end of
the Battery Cover and slide
o to reveal the battery
compartments.
2. Insert 1 fresh AA alkaline
battery, according to
polarity, into the Movement.
3. Rotate the Time Set Wheel
to set the time.
4. Insert 3 fresh AA alkaline
batteries, according to
polarity, to operate the
moving gears.
4. Mount on a wall and enjoy!
Learn more from our video:
bit.ly/wallclock_setup
Note: The quartz movement will keep the clock running
accurately. If the clock does not operate, or steadily
loses time, replace the battery in the movement
MOUNTING
Use the Hanger Hole on the back to mount the clock.
For Moving Gears
AA
AA
AA
AA
Movement
Time Set
Wheel
