Easy Clocking XENIO 500 Manual

INSTRUCTION GUIDE FOR XENIO 500

Contents

INTRODUCTION 4

WHAT’S IN THE BOX 5

XENIO TIME CLOCK INSTALLATION 6-8

CONFIGURE WIFI SETTINGS (OPTIONAL) 9-10

CONNECT VIA ETHERNET/NETWORK CABLE 11

HOST PC SETTINGS 12-13

EXPORTING TIME LOGS INTO USB 14-15

ADDING EMPLOYEES 16-19

Adding an Employee’s Fingerprint 16-17

Adding a Smart Card to an Employee 18

Adding a Pin Number to an Employee 19

ASSIGNING ADMINISTRATOR/MANAGER LEVEL 20-21

HOW TO PROPERLY CLOCK IN/OUT 22-25

Fingerprint 22

Smart Card 23

Pin Number 24-25

SYSTEM SETTINGS 26-27

This instruction guide covers the

conﬁguration for the following model:

XENIO 500

Manual Version 1.0

©Easy Clocking 2018

What’s in the box

4x 4x 1x

POWER ADAPTER

A) B) C)

WALL MOUNT

XENIO

SCREWS WALL

ANCHORS

COVER PLATE

WALL MOUNT

SCREW

XENIO

INSTRUCTION

GUIDE

Installation

Using a pencil, mark 4

screw holes on the wall.

Insert Wall Anchors (B)

into the 4 holes that you

marked in Step 1.

Align your Wall Mount with the 4 Wall Anchors (B)

and secure the mount to the wall with the 4

Screws (A) provided.

*When connecting to your network via ethernet:

Run the cables (ethernet cable not provided)

inside or outside of the wall.

Connect your ethernet cable to an ethernet wall

jack, router, or switch. Insert the Power Adapter

to an electrical receptacle.

Attach the other end of the ethernet cable and

the Power Adapter to the Xenio.

** Network cable is not required when using WiFi

** When connecting power to the Xenio via POE, DO NOT connect the provided power adapter.

Attach Cover Plate (optional) into grooves

Attach the Xenio to the Wall Mount,

Secure the Xenio to the Wall Mount by

fastening the Wall Mount Screw (C),

Conﬁgure Wiﬁ Settings (optional)

1. Open the Xenio Time Clock Menu

Tap

2. Select Wi-Fi

3. Enable the Wi-Fi option on the Time Clock

To enable Wi-Fi, switch the Wi-Fi option

from OFF to ON located at the top of the screen.

4. Select your Wireless network from the list.

If the network is secured, you will need to input

your security key/password to successfully connect.

If the network is open (no security key/password,)

the device will connect automatically.

Tap

Wi-Fi 1

Wi-Fi 3

Wi-Fi 4

connected

open

secured

Wi-Fi 2

secured

CONNECT

5. Tap on CONNECT located on the bottom right side of

the screen to complete the process.

CONNECTCANCEL

6. Once connected, the status will be displayed below

the name of the Wireless network.

To conﬁrm the Status, Signal Strength, Security Type

and IP address, simply select the network once again

from the list. You will also be able to FORGET the

network from this screen.

Wi-Fi 1

Wi-Fi 3

Wi-Fi 4

connected

open

secured

Wi-Fi 2

secured

Tabla de contenidos

Manuales populares de Reloj de tiempo de otras marcas

Dyflexis

Dyflexis Rex-O-Matic Noa Manual de usuario

L’EPEE 1839

L’EPEE 1839 TIME FAST II Manual de usuario

TimeMoto

TimeMoto TM-616 Manual de usuario

Videx

Videx 701T Manual de usuario

Kronos

Kronos Timekeeper 400 Series Instrucciones de funcionamiento

Scarlett

Scarlett SC-810 Manual de usuario

Funtronix

Funtronix SCORE-N-TIME T-240 Manual de usuario

IKEA

IKEA NUFFRA 10357872 Manual de usuario

Multipipe

Multipipe 22-23015 Guía del usuario

L’EPEE 1839

L’EPEE 1839 SUN CLOCK Manual de usuario

Oregon Scientific

Oregon Scientific TW331 Manual de usuario

MT Logic

MT Logic CL-471 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

LA CROSSE CLOCK

LA CROSSE CLOCK Harper 404-3450A Manual de usuario

Europa components

Europa components ET167DYD Manual de usuario

TONIN CASA

TONIN CASA Opaca circle Manual de usuario

CS TIMECLOCK

CS TIMECLOCK 2110 Manual de instrucciones

timetac

timetac Evo Smart Manual de usuario