Enter the new network settings:
oDHCP –DO NOT ENABLE! If enabled the clock will be assigned an IP address which
will be unknown to the user.
oIP –enter the IP address of the clock here
oSubnet mask –normally 255.255.255.0
oGateway (optional) - this must be set to enable access to / and from the clock to the
internet. Internet connectivity is necessary for firmware updates and automatic
updating of the clock’s time from internet time servers.
oBroadcast IP - is automatically filled, if and when there are more clocks on the
network. The clocks will find each other on the network automatically, and will act
as primary / secondary setup. This allows clocks on the same subnet mask (e.g. local
network within the company) to update directions automatically. For employees it
means that if there are more than 1 clock installed, they can clock IN on 1 clock, and
clock OUT on another one, without having to nominate on the clock if they are
coming or going. The directions will be automatically updated between the clocks.
oName Server 1 –4 (optional) - enter the IP’s of your Name Server(s) (DNS) here.
After the network settings are changed, click on “Save” and the clock will reboot.
Future access to the CS TimeClock web interface will now be from the new IP address
you’ve entered above.
Please reference the CS TimeClock Web Interface Manual with regards to the other menu
options.
