La Crosse Technology WS-8008U Guía de instalación

La Crosse Technology, Ltd Page 1

WS-8008U FAQS

The links below will work in most PDF viewers and link to the topic area by clicking

the link. We recommend Adobe Reader version 10 or greater available at:

http://get.adobe.com/reader

CONTENTS

WT-8008U/WS-8008U FAQS ....................................................................... 1

Batteries ..................................................................................................... 1

Digital Clock Factory Restart....................................................................... 2

Fahrenheit/Celsius...................................................................................... 2

12-Hour or 24-Hour Time Format ............................................................. 2

Supported Time Zones.............................................................................. 2

Dashes, OFL or Stuck Indoor Temperature ..................................................... 2

Does the clock have a backlight?................................................................... 2

Time is off by hours..................................................................................... 3

Daylight Saving Time................................................................................... 3

Manually Set Time/Date: Program Menu ........................................................ 3

No WWVB Tower Icon .................................................................................. 4

Set Time Alarm ........................................................................................... 4

Activate/Deactivate Time Alarm .................................................................... 4

Snooze Alarm ............................................................................................. 4

Digital clock has distorted or frozen display .................................................... 5

Digital clock is blank: No letters, numbers or dashed lines................................ 5

Day of the week is incorrect. ........................................................................ 5

Digital clock drains batteries quickly .............................................................. 5

Digital clock has missing segments................................................................ 5

Batteries

Explanation: Many problems are resolved with fresh batteries of the appropriate

voltage. Many items sent in under warranty work when tested with fresh batteries.

Batteries manufactured this year will have an expiration date 10 years (or more) in

the future. Battery technology has improved and batteries will maintain voltage

longer in storage. However, the environment the batteries reside in for the 10 years

can deplete the power.

We suggest name brand Alkaline batteries for indoor displays.

A minimum voltage of 1.48V for each battery is necessary for proper

performance.

La Crosse Technology, Ltd Page 2

Use batteries dated at least six years in advance of the current year. Batteries

dated earlier than six years from now may still work, but may be unstable in

performance.

Good name brand batteries make less noise, which reduces the chance of RF

(radio frequency) interference from the battery compartment.

Digital Clock Factory Restart

Explanation: The factory restart returns the digital clock to an “out-of-the-box”

state and often resolves an issue.

Factory Restart:

1. Remove all batteries from the digital clock.

2. Press one of the buttons on the digital clock at least 20 times to clear all

memory.

3. Verify that the digital clock is blank before proceeding (some lines are painted

on and will not disappear).

4. Leave without power for 15 minutes (very important).

5. Insert fresh Alkaline batteries into the digital clock.

6. Do not press buttons for 15 minutes.

Fahrenheit/Celsius

Press the ºF/ºC button to switch from Fahrenheit to Celsius.

12-Hour or 24-Hour Time Format

Display the time in 12-hour or 24-hour format

Default is 12-hour time

Use the Program Menu to switch time formats

Supported Time Zones

This clock has 4 Time Zones: E=Eastern, C=Central, M=Mountain & P= Pacific

The digital clock works in North America.

Outside of North America, the digital clock will not receive a WWVB signal, but

will keep time like a quartz clock.

Dashes, OFL or Stuck Indoor Temperature

Explanation: These symbols are error messages indication the indoor sensor is

outside of its readable range. For indoor readings, this is generally a power related

issue.

This is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries from atomic

digital clock.

Press any button 20 times. Leave the digital clock unpowered for 1-2 hours.

Insert fresh alkaline batteries with correct polarity.

If the indoor temperature is still dashes or OFL, the digital clock may need

replacement.

Does the clock have a backlight?

No, as this clock is battery operated there is no backlight.

La Crosse Technology, Ltd Page 3

Time is off by hours

Check to see if the WWVB Tower icon appears on the atomic digital clock. If not,

the digital clock has not received a WWVB time signal in the past 24 hours.

Reposition the digital clock with the front or back facing Colorado.

Check that the Time Zone selected correctly reflects your location. Adjust the

time zone in the Program Menu.

Check that the DST indicator is correct for your location (most areas observe

DST so this should be ON). Adjust the DST indicator in the Program Menu.

Large buildings, metal roofed buildings and buildings or rooms full of electrical

and/or radio equipment make it difficult to receive the WWVB time signal.

Daylight Saving Time

Dependent on your location, position of the clock in your home, and atmospheric

interference, it may take up to 5 nights for the change from Daylight Savings

Time to Standard Time and vice-versa to occur.

Check for a WWVB Tower Icon showing on the atomic digital clock. The tower

icon indicates you have received the WWVB signal from Ft Collins CO in the past

24 hours.

Check that the clock is in the correct Time Zone.

Check whether the DST indicator is ON or OFF. If the indicator is OFF the clock

will not change.

Check for fresh batteries. Without proper batteries, the antenna will have a

harder time picking up the signal.

Position the digital clock in a window (with the front or back) facing Ft. Collins,

Colorado and leave for up to five nights. If you do not have a window facing this

direction, position the clock near an outside wall and point the unit in this

general direction.

Manually Set Time/Date: Program Menu

1. Press the SET button to enter time set mode, confirm adjustments and move to

next item.

2. Press the ▲or ▼buttons to adjust values.

3. Exit the programming mode at any time by pressing the SNZ button.

12/24-HOUR TIME MODE: Either 12or 24 will flash on the display. Use up or

down arrow to change from 12 to 24 hour format time (12 for AM/PM, 24 for

military time). Press and release the SET button once.

HOUR: The Hour will be flashing. Use the up or down arrow to set the

hour. If using 12-hour Time Mode, be sure to set the hour for am or

pm. Press and release the SET button once.

MINUTES: The Minutes will be flashing. Use the up or down arrow to set the

minutes. Press and release the SET Button once.

YEAR: The Year will flash (09). Use the up or down arrow to set the

year. Press and release the SET button once.

MONTH: The Month will be flashing. Use the up or down arrow to set the

month. Press and release the SET button once.

DATE: The numeric day will be flashing. Use the up or down arrow to set

the date correctly.

La Crosse Technology, Ltd Page 4

Note: Day of week will automatically set. Press and release the SET Button

once.

DAYLIGHT SAVING TIME: DST will show with either ON or OF

flashing. Most states use DST, so this should be set to ON. However if the

location does not use DST, use the up or down arrow to turn it OF. Press

and release the SET button once

OTHER SETTINGS:

TIME ZONE SETTING: From normal display mode, simply press and release the

ZONE/up arrow button to change the Time Zone from Pacific, Mountain, Central

and Eastern. The unit will see the letter P, M, C or E showing above the

seconds.

Note: This clock only has four time zones. Default is Pacific Time Zone.

FAHRENHEIT OR CELSIUS: From normal display mode, simply press and release

the F/C/down arrow button to change from Fahrenheit to Celsius.

WWVB SEARCH: When the batteries are inserted or the WWVB Search button Is

pressed, the clock will search for the WWVB signal for 7 minutes. If it does not

find a signal, the tower icon will stop flashing and search again on the hour.

Note: When the clock is searching for WWVB, signal the unit will not be able to

use the other program buttons. The unit can turn off the search by pressing the

WWVB search button one time.

No WWVB Tower Icon

The digital clock has not received a WWVB time signal in the past 24 hours.

Position the digital clock for better reception.

Hold the -button to send the Digital clock on a WWVB signal search at night.

Allow up to 5 nights to receive the time signal.

Set Time Alarm

HOUR: Press and hold down the ALARM button for 2 seconds until the Hours

flash. Use the up or down arrow buttons to set the Hour. Press ALARM button to

confirm the setting

MINUTES: The Minute display of the Alarm time starts to flash. Use the up or

down arrow to set the required minute. Press ALARM button to confirm the

setting and to end the setting procedure.

Activate/Deactivate Time Alarm

Press and release the ALARM button to activate or deactivate the alarm.

With the Alarm time showing, press and release the ALARM button to activate

the alarm.

The alarm icon (bell) appears when alarm is active.

The alarm icon will disappear when alarm is inactive.

Note: When the alarm sounds, it will continue for two minutes then shut off.

Snooze Alarm

When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 5

minutes.

La Crosse Technology, Ltd Page 5

This crescendo alarm will sound for 120 seconds if not deactivated. Press any

button to stop the alarm for 24 hours.

Digital clock has distorted or frozen display

Explanation: On a brand new digital clock, check for thin plastic film of printed

scratch guard that may be on the screen of the digital clock. This thin piece of

plastic has printed numbers for store displays. When the batteries are installed, the

“real” numbers show behind the printed scratch guard and create distortion.

With all power removed, the digital clock should be blank.

If numbers still appear, please check for scratch guard.

Power:

Check that the batteries are installed correctly.

This is generally a power related issue.

Batteries may be overpowered or underpowered.

Remove batteries from digital clock.

Press any button 20 times. Leave the batteries out of the display for 2 hours.

Insert batteries into the digital clock.

Digital clock is blank: No letters, numbers or dashed lines

Check that the batteries are installed correctly.

Batteries may be overpowered or underpowered.

Remove batteries from digital clock.

Press any button 20 times. Leave the batteries out of the display for 2 hours.

Insert batteries into the digital clock.

Day of the week is incorrect.

Check the year setting in the program menu. The day of the week sets

automatically based on the setting of the year, month and date.

Digital clock drains batteries quickly

Test a new set of alkaline batteries. Write down the date of installation and the

voltage of the batteries.

When the batteries fail, please note the date and voltage again. This is helpful in

determining the problem.

Check for leaking batteries, which may damage the digital clock.

Digital clock has missing segments

Explanation: When parts of numbers, letters, or pictures are missing on the

display, it is often power related.

With all power removed, the digital clock should be blank.

If numbers still appear, please check for scratch guard.

Power:

Check that the batteries are installed correctly.

This is generally a power related issue.

Batteries may be overpowered or underpowered.

Remove batteries from digital clock.

Press any button 20 times. Leave the batteries out of the display for 2 hours.

Insert batteries into the digital clock.

Tabla de contenidos

Otros manuales de Reloj de La Crosse Technology

La Crosse Technology

La Crosse Technology 513-1211 Dimensiones

La Crosse Technology

La Crosse Technology WT-5721 Manual de usuario

La Crosse Technology

La Crosse Technology WS-8053U Manual de usuario

La Crosse Technology

La Crosse Technology WS-8007U-C Manual de usuario

La Crosse Technology

La Crosse Technology 817-2410 Dimensiones

La Crosse Technology

La Crosse Technology Landshark Manual de usuario

La Crosse Technology

La Crosse Technology WT-3144S Manual de usuario

La Crosse Technology

La Crosse Technology 616-1410B Manual de usuario

La Crosse Technology

La Crosse Technology WT-8005U Manual de usuario

La Crosse Technology

La Crosse Technology 513-1417AL Manual de usuario

La Crosse Technology

La Crosse Technology T84220 Manual de usuario

La Crosse Technology

La Crosse Technology 404-1946 Dimensiones

La Crosse Technology

La Crosse Technology Wattz 2.0 Manual de usuario

La Crosse Technology

La Crosse Technology Radio Controlled Projection Alarm WT-5110 Manual de usuario

La Crosse Technology

La Crosse Technology K86302 Manual de usuario

La Crosse Technology

La Crosse Technology 513-1918B Manual de usuario

La Crosse Technology

La Crosse Technology World Time Center WS-7092U Manual de usuario

La Crosse Technology

La Crosse Technology WS-8016U Manual de usuario

La Crosse Technology

La Crosse Technology WT-3161BK Manual de usuario

La Crosse Technology

La Crosse Technology 404-3051 Manual de usuario

La Crosse Technology

La Crosse Technology 513-1429TH Dimensiones

La Crosse Technology

La Crosse Technology W88631 Manual de usuario

La Crosse Technology

La Crosse Technology 515-1419 Manual de usuario

La Crosse Technology

La Crosse Technology WS-8117 Manual de usuario

Manuales populares de Reloj de otras marcas

Silicon Laboratories

Silicon Laboratories SI5324 Manual de usuario

Heathkit

Heathkit GC-1005 Manual de usuario

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manual de usuario

Andrew O'Malley

Andrew O'Malley DOTKLOK Manual de usuario

ALGE-Timing

ALGE-Timing ASC3 Manual de usuario

Bodet

Bodet Profil 960 Manual de usuario

Nixie Clock

Nixie Clock Divergence Meter Manual de usuario

Mini Gadgets

Mini Gadgets MCPro Manual de usuario

Casio

Casio TMR-200 Manual de usuario

Progetti

Progetti ILTEMPOSTRINGE Manual

BVItech

BVItech BV-101 Manual de usuario

Progetti

Progetti KALIMERO Manual

Sharp

Sharp SPC900 Manual de usuario

Datexx

Datexx DF0063 Manual de usuario

LG LEC-005 Manual de usuario

IKEA

IKEA ROTBLÖTA Manual de usuario

U-Line

U-Line Н-2811 Manual de usuario

Digiview

Digiview RC305EL Manual de usuario