KT&C DR28V12IR Manual de usuario
ULTRA HIGH RESOLUTION
VANDAL DOME CAMERA
OPERATION MANUAL
M222-DR28V12-001
Thank you for choosing our high quality camera.
Before attempting to connect or operate, please read and follow these instructions.
CONTENTS
1. NOTICES
2. FOR YOUR SAFETY
3. FEATURES
4. EQUIPMENT AND ACCESSORIES
5. OVERVIEW AND FUNCTION
6. INSTALLATION
7. CONNECTION
8. DIMENSIONS
9. SPECIFICATION
10. OSD MENU STRUCTURE
2
These servicing instructions are for use by qualied service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualied to do so.
Use Class 2 Power Supply Only
CAUTION
3
1. NOTICES
This device complies with Part 15 of FCC regulations.
Operation is subject to the following two conditions:
1. This device may cause harmful interference.
2. This device may receive interference that can cause affect the operation of this
equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference problems at his or her own expense.
Caution
Alteration or modifications carried out without. appropriate authorization may
invalidate the user's right to operate the equipment.
1. A regulated DC12V 500mA power supply is recommended to ensure the best picture
quality and stable operation.
An unregulated power supply may cause damage to the camera.
Using an unregulated power supply will void the product warranty.
2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance, then please adjust accordingly.
3. Do not attempt to disassemble the camera to access internal components.
Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light, which may
cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
1. CAUTIONS
4
WEEE
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its remove, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government ofce, for details of where and how to safely recycle the
item.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude to constitute a
risk of electric shock.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
2. FOR YOUR SAFETY
1) All warning and instruductions in this manual should be followed.
2) Save this manual for future reference.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9) To help prevent from electric shock, plug the equipment and peripheral power cables
into properly polarized or grounded electrical outlets. These cables are equipped with
the wide blade or the third prong to ensure proper grounding. Do not use adapter
plug or remove the ground prong from a cable. If the provided plug does not t your
outlet, consult an electrician.
10) Ensure that nothing rests on your equipment's cabloe and that the cables are not
located where they can be stpped on, trapped over, or pinched.
11) Only use attachments or accessories as specied.
12) Only use the equipment with the cart, stand, tripod, bracket, or table that is specied
by the manufacturer or sold with the apparatus. When a cart is used, use caution to
prevent the cart from tipping over and to avoid injury.
13) Do not connect or disconnect during lighting storms due to risk of electric shock.
14) If any of the following conditions occur, unplug the equipment from the electrical
outlet and replace the part or contact your trained service provider:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the equipment.
• The equipment has been exposed to water.
• The equipment has been dropped or damaged.
• The equipment does not operate correctly when you follow the operating
instructions.
5
3. FEATURES
• Superlative resolution of over 750 horizontal TV lines for amazing image quality.
• 960H CCD for sensor sensitivity of .001 lux in low light without DSS boost.
960H CCD sensor with high IR sensitivity. (LED Type)
• True Day/Night zero light operating range of 100 feet or more (LED Type)
(depending on scene reflectivity) from 24 IR LEDs with Smart automatic
exposure level adjust to achieve the desired IR brightness in a user defined area.
• Full motion color or digital day/night during low ambient light without ghosting.
• Simple and easy to use OSD setup menu.
- Digital Wide Dynamic Range(DWDR) to properly expose images during unbalanced
light contrast in the scene.
- Anti Color Roll white balance option resists fluorescent light interference.
- Optional Back Light Compensation (BLC) and Highlight Compensation (HLC).
- Adjustable 2D-Noise Reduction to increase picture clarity and improve
utilization of DVR disk storage.
- Privacy image masking for 4 configurable zones.
• Varifocal DC iris lens to capture the desired field of view.
• Dual voltage (12VDC/24VAC) with Anti Color Roll.
• Service Video output for convenient installation, and ease of service.
• 3-Axis gimbal for convenient wall or ceiling mounting.
• Optional junction box plate.
6
7
4. EQUIPMENT AND ACCESSORIES
Camera Manual
Template
Screws(3ea) / Plastic Anchors (3ea)
/ Wrench / Micro Screw (1ea)
Service Video Output Test Cable
Pigtail Cable (12VDC only) Pigtail Jack (Dual)
OPTIONAL ACCESSORIES
-Wall mount bracket :
wall mount bracket with ½” conduit ttings
top and bottom.
8
Box adapter
- Junction box mount adapter for
outdoor dome camera
- Rough-in box adapter ts 1 or 2 gang
or 4" octagonal/square/round boxes
5. OVERVIEW AND FUNCTION
9
• LED Type
• Standard Type
IR LED
OSD Joystick
OSD Joystick
Service Video
Connector
Service Video
Connector
6. INSTALLATION
• LED Type
10
Template
Housing Bottom
Dome Cover
Cover Screws
Shroud
Screws
3-AXIS Gimbal
Plastic Anchors
Lens Zoom Knob
Lens Focus Knob
Tabla de contenidos
Otros manuales de Cámara de seguridad de KT&C
KT&C
KT&C KNC-p3BR28V12IR Guía del usuario
KT&C
KT&C KPC-LDD45NU Manual de usuario
KT&C
KT&C KPC-N501NUB Manual de usuario
KT&C
KT&C KPC HDD122 Manual de usuario
KT&C
KT&C KPC-N571U Manual de usuario
KT&C
KT&C KPC-DQ100NHB Manual de usuario
KT&C
KT&C KNC-p3 Series Manual de usuario
KT&C
KT&C KPC-HDN552MW Manual de usuario
KT&C
KT&C KEZ-c2BR28V12XIR Guía del usuario
KT&C
KT&C AVN82V Manual de usuario
KT&C
KT&C KNC-Xi130HD Manual de usuario
KT&C
KT&C KPC-HDN722M Manual de usuario
KT&C
KT&C OMNI-IP KNC-p3BR4XIR Guía del usuario
KT&C
KT&C HIGH RESOLUTION DOME CAMERA Manual de usuario
KT&C
KT&C KPC-HZA302M Manual de usuario
KT&C
KT&C KPC-N551NU10 Manual de usuario
KT&C
KT&C KPC-ZAK220 Manual de usuario
KT&C
KT&C M173-LD(N)Di45-001 Manual de usuario
KT&C
KT&C KPC-SPDN120HD Manual de usuario
KT&C
KT&C KNC-VDi100HD Manual de usuario
