Kramer VM-1610 Manual de usuario

VM-1610 Quick Start

P/N:

2900- 301268QS

Rev:

Scan for full manual

VM-1610 Quick Start Guide

This guide helps you install and use your VM-1610 for the first time.

Go to www.kramerav.com/downloads/VM-1610 to download the latest user manualand check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-1610 Balanced Audio-Stereo Distributor

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-1610

Feature

Function

POWER Switch

Illuminated power switch to turn the unit on and off.

CH 2 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 2.

MODE (1:10, 2x1:5) Button

Press to select 2x1:5 output, release to select 1:10 output.

CH 1 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 1.

CHANNEL 1 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (1 to 5).

CHANNEL 1 INPUT Terminal Block

Connect to balanced stereo source 1.

CHANNEL 2 INPUT Terminal Block

Connect to balanced stereo source 2.

CHANNEL 2 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (6 to 10) or connect to the

channel 2 balanced stereo acceptors (1 to 5).

Power Connector with Fuse

AC connector enabling power supply to the unit.

Step 3: Mount VM-1610

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-1610.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-1610.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-1610 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Step 6: Operate VM-1610

1. Set the MODE (1:10, 2x1:5) button to the required connection mode.

2. If required, adjust the level trimmers with a small screwdriver.

Otros manuales para VM-1610

Tabla de contenidos

Otros manuales de Convertidor de medios de Kramer

Kramer

Kramer VM-4UHD Manual de usuario

Kramer

Kramer VP-424 Manual de usuario

Kramer

Kramer 465 Manual de usuario

Kramer

Kramer VP-417 Manual de usuario

Kramer

Kramer DigiTOOLS VM-2HDMI Manual de usuario

Kramer

Kramer VM-100CB Manual de usuario

Kramer

Kramer VA-680D Manual de usuario

Kramer

Kramer KDS-SW3-EN7 Manual de usuario

Kramer

Kramer VP-440H2 Manual de usuario

Kramer

Kramer VP-701SC Manual de usuario

Kramer

Kramer FC-7501 Manual de usuario

Kramer

Kramer VP-715 Manual de usuario

Kramer

Kramer FC-7501 Manual de usuario

Kramer

Kramer VM-3A Manual de usuario

Kramer

Kramer FC-17 Manual de usuario

Kramer

Kramer VM-80VN Manual de usuario

Kramer

Kramer VP-409 Manual de usuario

Kramer

Kramer VS-411UHD Manual de usuario

Kramer

Kramer VP-506 Manual de usuario

Kramer

Kramer VA-1VGA Manual de usuario

Kramer

Kramer VM-1110xl Manual de usuario

Kramer

Kramer PT-1SPDIF Manual de usuario

Kramer

Kramer VA-256P Manual de usuario

Kramer

Kramer WP-789R Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario