Kramer FC-101Net Manual de usuario

FC‑101NET Quick Start

P/N:

2900- 300861QS

Rev:

Scan for full manual

FC‑101NET Quick Start Guide

This guide helps you install and use your FC‑101NET for the first time.

Go to www.kramerav.com/downloads/FC-101NET to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

FC‑101NET Dual Dante Interface

1 Bracket set

Double-sided adhesive dual lock tape

1 Quick start guide

Step 2: Get to know your FC‑101NET

Feature

Function

ON LED

Lights green when the device receives power.

SYS LED

Lights green when Dante network is available; red if an error has occurred.

SYNC LED

Lights green for digital audio normal operation.

Flashes green when this unit is the Master clock.

Lights red if an error has occurred.

Dante PoE RJ-45 Port

Connect to the Dante audio source via the Network and provide Power over Ethernet

(PoE) to the device.

By default, DHCP is enabled.

DEF Push Button

To reset/reboot the device, press and release the button.

To reset to factory settings, press and hold the button for 30 seconds.

OUTPUTS 1 and 2 5-pin Terminal

Block Connector

Connect to a single balanced stereo audio output or two separate mono outputs

(+, –, G).

RS-232 3-pin Terminal Block

Connector

Connect to a serial controller to control this device.

Step 3: Install FC‑101NET

Install FC‑101NET using one of the following methods:

Attach one side of the adhesive dual lock tape to the metallic surface of the device and the

other to a flat surface.

Fasten a bracket (included) on each side of the unit and attach it to a flat surface. For more

information go to www.kramerav.com/downloads/FC-101NET.

Mount the unit in a rack using an optional RK-4PT rack adapter.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your FC‑101NET. For best results, we recommend that

you always use Kramer high-performance cables to connect AV equipment to FC‑101NET.

Step 5: Connect the power

Once connected, PoE is provided via the Dante port.

Safety Instructions

Caution:

There are no operator serviceable parts inside the unit.

Warning:

Disconnect the power before installing.

See www.KramerAV.com for updated safety information.

Step 6: Operate FC‑101NET

Operate FC‑101NET via:

Remotely, RS-232 serial commands

transmitted by a touch screen system, PC, or

other serial controller.

RS-232

Baud Rate:

115200

Parity:

None

Stop Bits:

Data Bits:

Command Format:

ASCII

Example: (set the volume output to -6dB): #AUD-LVL 2,1,-6<CR>

Technical Specifications

Outputs

1 Balanced Stereo Audio/2 Mono

Audio

On a 5-pin terminal block

Port

1 Dante

On an RJ-45 connector

Control

Dante IP control matrix and Kramer Protocol

3000

Power

Consumption

48V DC, 100mA

Source

48V DC (PoE)

Cooling

Convection Ventilation

Environmental

Conditions

Operating Temperature

0° to +40°C (32° to 104°F)

Storage Temperature

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory Compliance

Safety

Environmental

RoHs, WEEE

Enclosure

Size

Pico TOOL

Type

Aluminum

General

Net Dimensions (W, D, H)

6.2cm x 5.2cm x 2.4cm (2.4” x 2” x 1”) W, D, H

Shipping Dimensions (W, D, H)

15.7 cm x 12cm x 8.7cm (6.2” x 4.7” x 3.4”) W,

D, H

Net Weight

0.08kg (0.2lb)

Shipping Weight

0.23kg (0.5lb)

Accessories

Included

Bracket set, double-sided adhesive dual lock

tape

Optional

RK-4PT rack adapter

Specifications are subject to change without notice at www.kramerav.com

Otros manuales para FC-101Net

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de Kramer

Kramer

Kramer KDS-EN6 Manual de usuario

Kramer

Kramer FC-42 Manual de usuario

Kramer

Kramer VP-791 Manual de usuario

Kramer

Kramer VM-4HDx1 Manual de usuario

Kramer

Kramer VP-434 Manual de usuario

Kramer

Kramer VP-792 Manual de usuario

Kramer

Kramer VP-435 Manual de usuario

Kramer

Kramer FC-7501 Manual de usuario

Kramer

Kramer KDS-SW3-EN7 Manual de usuario

Kramer

Kramer 482 Manual de usuario

Kramer

Kramer VP-470 Manual de usuario

Kramer

Kramer FC-7501 Manual de usuario

Kramer

Kramer VM-212HDMI Manual de usuario

Kramer

Kramer 401C Manual de usuario

Kramer

Kramer VM-2DP Manual de usuario

Kramer

Kramer KDS-SW3-EN7 Manual de usuario

Kramer

Kramer KDS-USB2 Kit Manual de usuario

Kramer

Kramer VP-721DS Manual de usuario

Kramer

Kramer VP-409 Manual de usuario

Kramer

Kramer VW-16 Manual de usuario

Kramer

Kramer VM-50AN Manual de usuario

Kramer

Kramer PT-1SPDIF Manual de usuario

Kramer

Kramer TOOLS VP-100 Manual de usuario

Kramer

Kramer VA-10 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario