Kramer VP-424C Manual de usuario
VP‑424C Quick Start
P/N:
2900- 301056QS
Rev:
1
Scan for full manual
VP‑424C Quick Start Guide
This guide helps YWOU install and use your VP‑424C for the first time.
Go to www.kramerav.com/downloads/VP-424C to download the latestuser manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
VP‑424C 4K HDMI/USB‑C Scaler
1 Bracket set
1 Quick start guide
1 Power adapter and cord
4 Rubber feet
Step 2: Get to know your VP‑424C
#
Feature
Function
1
ON LED
Lights green when the unit is powered.
2
INPUT Button
Press to toggle the input between HDMI and USB-C.
3
HDMI™LED
Lights when the HDMI input is selected.
4
USB-C LED
Lights when the USB-C input is selected.
5
MENU Button
Press to enter/escape the on-screen display (OSD) menu. Press together with
the –button to reset to 1080p (RESET TO 1080P).
6
ENTER Button
In OSD, press to choose the highlighted menu item. Press together with the
+ button to reset to XGA (RESET TO XGA).
7
–Button
In OSD, press to move backward through the list or to decrement the
parameter value.
8
+/FREEZE Button
In OSD, press to move forward through the list or to increment the parameter
value. When not in OSD, press to freeze the display.
9
PROG USB Connector
Connect to a USB memory stick for upgrading the firmware.
10
USB-C IN USB Type C Port
Connect to a USB type-C audio-video source.
11
HDMI™ IN Connector
Connect to an HDMI source.
12
HDMI™OUT Connector
Connect to an HDMI acceptor.
13
REMOTE 3-pin Terminal Block Connector
Connect to contact closure switches (by momentary contact between the
desired pin and GND pin) to select an input.
14
5V DC
+5V DC connector for powering the unit.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Install the VP‑424C
Install VP‑424C using one of the following methods:
•Attach the rubber feet and place the unit on a flat surface.
•Fasten a bracket (included) on each side of the unit and attach it to a flat surface.
For more information go to www.kramerav.com/downloads/VP-424C.
•Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/VP-424C).
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your VP‑424C. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the VP‑424C.
Step 5: Connect the power
Connect the power cord to VP‑424C and plug it into the mains electricity.
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by
qualified personnel only.
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information
Step 6: Operate and control the VP‑424C
Select the input via the following options:
•Press the front panel INPUT button.
•Use the contact closure terminal block to select an input remotely with the
press of a button.
Press the MENU button to configure and control the device via OSD menu:
•Set brightness, contrast, color, noise reduction etc.
•Manage EDID.
•Configure HDCP behavior.
•Select resolution and aspect ratio.
•Manage auto power down (Auto Sync Off).
•View device information.
•Reset to factory default parameters.
•Control OSD display.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Convertidor de medios de Kramer
Kramer
Kramer TOOLS VP-100 Manual de usuario
Kramer
Kramer VM-3A Manual de usuario
Kramer
Kramer VP-551X Manual de usuario
Kramer
Kramer VM-100C Manual de usuario
Kramer
Kramer VM-4DH Manual de usuario
Kramer
Kramer FC-331 Manual de usuario
Kramer
Kramer FC-31 Manual de usuario
Kramer
Kramer FC-70R Manual de usuario
Kramer
Kramer VP-418 Manual de usuario
Kramer
Kramer VP-451 Manual de usuario
Kramer
Kramer VP-2K Manual de usuario
Kramer
Kramer VP-701SC Manual de usuario
Kramer
Kramer VP-424 Manual de usuario
Kramer
Kramer FC-4001 Manual de usuario
Kramer
Kramer VP-420 Manual de usuario
Kramer
Kramer DigiTOOLS 7408 Manual de usuario
Kramer
Kramer VP-417 Manual de usuario
Kramer
Kramer FC-331 Manual de usuario
Kramer
Kramer VM-212HDMI Manual de usuario
Kramer
Kramer VW-9 Manual de usuario
