Kramer VP-23RC Manual de usuario

Kramer Electronics, Ltd.

USER MANUAL

Model:

VP-23RC





Presentation Switcher / Controller







Contents

Introduction 1

Getting Started 1

2.1

Quick Start 1

Overview 3

3.1

About the VP-23RC 3

3.1.1

Understanding the Presentation Switcher Section 3

3.1.2

Understanding the Media / Room Controller Section 4

3.1.3

Controlling the VP-23RC 5

3.2

Connecting the VP-23RC Rear Panel 6

3.3

Recommendations for Achieving the Best Performance 7

3.4

Terminology Used in this User Manual 7

Your Presentation Switcher / Controller 8

4.1

The VP-23RC Front Panel 8

4.2

The VP-23RC Rear Panel 10

4.3

The VP-23RC Underside Panel 13

Installing the VP-23RC on a Rack 14

Connecting the VP-23RC Presentation Switcher Section 15

6.1

Connecting the Balanced/Unbalanced Stereo Audio Input/Output 17

6.2

Wiring the CAT 5 LINE OUT RJ-45 Connector 18

6.3

Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 18

Connecting to the Media / Room Controller Equipment 19

7.1

Setting the Media / Room Controller PROGRAM Dipswitches 21

7.1.1

Factory Reset 21

Controlling the VP-23RC 22

8.1

Controlling the VP-23RC via a PC 22

8.1.1

Connecting an RS-232 port to a PC 23

8.2

Controlling Additional Kramer Machines via RS-232 and RS-485 24

8.2.1

The Presentation Switcher Section Dipswitches 24

8.3

Controlling via the ETHERNET 25

8.3.1

Connecting the ETHERNET Port directly to a PC (Crossover Cable) 26

8.3.2

Configuring Your PC 26

8.3.3

Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 27

Operating Your VP-23RC 28

9.1

The Front Panel Buttons 28

9.2

Configuration of the VP-23RC 29

9.3

Media / Room Controller Section Operation 29

9.3.1

Operating the Media / Room Controller 32

9.3.2

An Example of Operating the VP-23RC 33

9.3.3

Using the Media / Room Controller Macro Buttons 33

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

9.3.4

Turning the Light of the Backlit Buttons On and Off 34

9.4

The Presentation Switcher Section Operation 34

9.4.1

The Independent Switchers Mode 34

9.4.2

The Master Audio Mode 35

9.4.3

The Presentation Switcher SELECTOR Buttons Macro Sequence 37

Flash Memory Upgrade 38

10.1

Flash Memory Upgrade for the Presentation Switcher Section 38

10.1.1

Downloading from the Internet 38

10.1.2

Connecting the PC to the RS-232 Port 38

10.1.3

Upgrading the Firmware 39

10.2

Flash Memory Upgrade for the Media / Room Controller Section 43

10.2.1

Downloading from the Internet 43

10.2.2

Connecting the PC to the RS-232 Port 43

10.2.3

Upgrading Firmware 44

10.2.4

Installing the Web Applet 44

10.3

Troubleshooting Firmware Upgrade Issues 45

Technical Specifications 46

Hex Table 47

12.1

Audio Gain Control Hex Tables 47

Communication Protocol 49

Figures

Figure 1: VP-23RC Configuration Example 6

Figure 2: VP-23RC Presentation Switcher / Controller – Front View 9

Figure 3: VP-23RC Presentation Switcher / Controller – Rear View 11

Figure 4: VP-23RC Presentation Switcher / Controller – Underside View 13

Figure 5: Connecting the VP-23RC Presentation Switcher Section 16

Figure 6: Connecting the Balanced Stereo Audio Input/Output 17

Figure 7: Connecting the Unbalanced Stereo Audio Input 17

Figure 8: Connecting the Unbalanced Stereo Audio Output 17

Figure 9: CAT 5 PINOUT 18

Figure 10: Connecting the VP-23RC Media/Room Controller Section 20

Figure 11: Connecting a PC without using a Null-modem Adapter 23

Figure 12: Default Dipswitch Settings 24

Figure 13: Control Configuration via RS-232 and RS-485 25

Figure 14: Local Area Connection Properties Window 26

Figure 15: Internet Protocol (TCP/IP) Properties Window 27

Figure 16: Example of a Typical Media/Room Controller Section Configuration 30

Figure 17: Example of a Typical Setup in the Lecture Auditorium 31

Figure 18: Labels Setup 32

Figure 19: VP-23RC Operation Example 33

Figure 20: Separate Switcher Mode 35

Figure 21: Switching in the Master Audio Mode 36

Figure 22: Presentation Switcher Macro Sequence Example 37

Figure 23: Splash Screen 39

Contents

iii

Figure 24: Atmel – Flip Window 39

Figure 25: Device Selection Window 40

Figure 26: Selecting the Device from the Selection Window 40

Figure 27: Loading the Hex 41

Figure 28: RS-232 Window 41

Figure 29: Atmel – Flip Window (Connected) 42

Figure 30: Atmel – Flip Window (Operation Completed) 42

Figure 31: The KFR-Programmer Window 44

Tables

Table 1: Terminology Used in this User Manual 7

Table 2: Front Panel VP-23RC Presentation Switcher / Controller Features 10

Table 3: Rear Panel VP-23RC Presentation Switcher / Controller Features 12

Table 4: VP-23RC Underside Panel Features 13

Table 5: CAT 5 PINOUT 18

Table 6: PROGRAM Dipswitch Settings 21

Table 7: Connecting an RS-232 Port to a PC 23

Table 8: Dipswitch Settings 24

Table 9: Connection Scheme (for the example in Figure 16) 30

Table 10: The Commands Configuration 32

Table 11: Technical Specifications of the VP-23RC Presentation Switcher / Controller 46

Table 12: VP-23RC Hex Table 47

Table 13: VP-23RC Master Audio Selector Hex Table 47

Table 14: Set the Audio Output Gain Control for the Groups 47

Table 15: Set the Audio Output Gain Control for the Microphone 47

Table 16: Set the Audio Output Gain Control for the Master Audio 48

Table 17: Increase or Decrease the Audio Output Gain by One Step 48

Table 18: Protocol Definitions 49

Table 19: Instruction Codes 50

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range

of problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better! Our 1,000-plus different models

now appear in 11 groups

that are clearly defined by function.

Congratulations on purchasing your Kramer VP-23RC Presentation Switcher

/ Controller, which is ideal for:

Controlling multimedia rooms, such as classrooms, auditoriums,

conference rooms and so on

Production studios, rental and staging

The package includes:

VP-23RC

Windows®-based Kramer control software and Kramer RC Configuration

software

Null-modem adapter, power cord

, and one 3.5mm to IR emitter control cable

Kramer RC-IR2 Infrared Remote Control Transmitter (including the

required batteries and a separate user manual

)

This user manual

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Use Kramer high performance high resolution cables

2.1 Quick Start

This quick start chart summarizes the basic setup and operation:

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:

Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories

and Rack Adapters; GROUP 11: Sierra Products

2 We recommend that you use only the power cord that is supplied with this machine

3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com

4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

Overview

3 Overview

This section describes:

Using shielded twisted pair (STP)/unshielded twisted pair (UTP) (see

section 6.3)

The VP-23RC (see section 3.1)

Presentation Switcher section (see section 3.1.1)

Media / Room Controller (see section 3.1.2)

Means of control (see section 3.1.3)

An example of how to connect the VP-23RC (see section 3.2)

Recommendations for achieving the best performance (see section 3.3)

Terminology used in this user manual (see section 3.4)

3.1 About the VP-23RC

The VP-23RC is a high quality all-in-one Presentation Switcher and Media/Room

Controller, which lets you control A/V equipment and room items such as window

blinds, room lights, and a projector lift. The VP-23RC includes two major

sections: the Presentation Switcher section and the Media/Room Controller

section, each of which can be operated independently, or in tandem.

3.1.1 Understanding the Presentation Switcher Section

The Presentation Switcher section includes three independent 4x1 audio/video

switchers

, and a master audio switcher

The VP-23RC Presentation Switcher section features:

Three sets of four selector buttons (for composite video and audio, s-Video

and audio, and VGA/UXGA and audio), and four master audio selector

buttons (CV, s-Video, VGA/UXGA and Mic). Each of these 16 selector

buttons lets you select the inputs to switch to the outputs and can be

configured

to carry out a sequence of up to 15 commands (a macro) so

that when pressing a configured button, the switching action is followed

by a macro sequence

VGA/UXGA video bandwidth of 350MHz to ensure transparent

performance even in the most critical applications, and is HDTV compatible

Composite/SDI video bandwidth of 650MHz, an s-Video bandwidth of

385MHz, and a CAT 5 bandwidth of 158MHz

1 A 4x1 switcher for composite video and audio, a 4x1 switcher for s-Video and audio, and a 4x1 switcher for computer

graphics (VGA/UXGA) signals with audio

2 That routes one of the pre-selected audio inputs (from these three switchers) to two separate outputs

3 By the system integrator

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

Digital microphone input level control and digital master audio level

control

Microphone talk-over mode

A CAT 5 output, with a transmission range of more than 300 feet (over 100

meters) that transmits VGA/UXGA signals

to a remote acceptor via a

receiver

An internal 5-Watt per channel (24kHz, 3dB) power amplifier for

connecting the speakers directly to the machine

A panel LOCK button to prevent tampering with the front panel

Recall of the previous setup from non-volatile memory

Audio output level change (via RS-232)

3.1.2 Understanding the Media / Room Controller Section

The Media/Room Controller section controls A/V equipment—especially

projectors and associated equipment

—in media rooms (such as classrooms,

boardrooms, or auditoriums), as well as room functions such as lights, blinds,

a projector lift and/or a screen motor.

The VP-23RC Media/Room Controller section includes:

Eight configurable buttons to set up any supported commands

An Ethernet port

for configuration and control

Two bidirectional RS-232

serial ports for universal display (for example,

projectors) and control of the VP-23RC (or other) switcher

Four relays for the simplified and centralized control of room functions

(such as lights, blinds, screen settings, and so on). The relays have

normally open (NO) and normally closed (NC) contacts

Three IR control ports

An IR-learner for the customized remote transmitters, without the need for

an external unit IR remote control

Macro mode operation, for programming up to 15 commands with the

press of a single button

Firmware upgrade support

1 The microphone input signal lowers the line audio output level when the connected microphone detects sound

2 Excludes audio

3 Including the A/V equipment connected to the VP-23RC Presentation Switcher section

4 Also for controlling the Presentation Switcher section

5 The RS-232 terminal block port (item 14 in Figure 3) is also used for firmware upgrade

Overview

3.1.3 Controlling the VP-23RC

Control the VP-23RC using the front panel buttons, or remotely via:

RS-232

serial commands transmitted by a touch screen system, PC, or

other serial controller

The Kramer Infrared remote control transmitter

The ETHERNET

The VP-23RC is dependable, rugged, and fits into two vertical spaces (2U) of

a standard 19” professional rack.

1 The RS-232 port (item 24 in Figure 3) located in the SWITCHER CONTROL area of the rear panel

2 The Ethernet port is located in the CONTROLLER area of the rear panel and is also used for configuration of the

media/room controller section by the system integrator

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3.2 Connecting the VP-23RC Rear Panel

The VP-23RC can be connected in different configurations, integrating the

Presentation Switcher section with the Media/Room Controller section. The

block diagram in Figure 1 shows a VP-23RC configuration example:

IR Emitters

Relays

RS-232

Figure 1: VP-23RC Configuration Example

In this example:

Three VIDEO sources are connected to the inputs

The three VIDEO outputs are all connected to the same projector

The projector is connected to the RS-232 port in the CONTROLLER area

Two of the video sources are also connected to the IR terminal blocks

A CAT 5 UXGA receiver is connected

Various room items are connected to the RELAY terminal blocks

A microphone and speakers are connected, as well as the audio inputs and

outputs

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VS-84HDCPxl Manual de usuario

Kramer

Kramer Sierra Video 1208V3 Manual de usuario

Kramer

Kramer VP-719DS Manual de usuario

Kramer

Kramer Sierra Video 1204V3 Manual de usuario

Kramer

Kramer Sierra Video 1208V5S Manual de usuario

Kramer

Kramer VS-88HDxl Manual de usuario

Kramer

Kramer 3232S Manual de usuario

Kramer

Kramer VS-42HN Manual de usuario

Kramer

Kramer VP-4x4xl Manual de usuario

Kramer

Kramer MTX3-16-M Manual de usuario

Kramer

Kramer VP-8x8 Manual de usuario

Kramer

Kramer VS-88DTP Manual de usuario

Kramer

Kramer VS-44HDXI Manual de usuario

Kramer

Kramer Sierra Video 1616V3 Manual de usuario

Kramer

Kramer VS-1616A Manual de usuario

Kramer

Kramer XL 1204V Manual de usuario

Kramer

Kramer VSM-4x4A Manual de usuario

Kramer

Kramer VS-626 Manual de usuario

Kramer

Kramer VS-44HDCP Manual de usuario

Kramer

Kramer 20-04400030 Manual de usuario

Kramer

Kramer VP-4x4K Manual de usuario

Kramer

Kramer VS-402XL Manual de usuario

Kramer

Kramer VS-88H Manual de usuario

Kramer

Kramer 3216HD Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario