Koehler K271 Series Guía
Operation and Instruction Manual
REV C
Koehler Instrument Company, Inc.
1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA
Toll Free: 1-800-878-9070 (US only) • Tel: +1 631 589 3800 • Fax: +1 631 589 3815
http://www.koehlerinstrument.com • e-mail: info@koehlerinstrument.com
Petroleum Testing & Analysis Instrumentation • Custom Design & Manufacturing
K271XX
Ramsbottom Carbon Residue
Apparatus
CERTIFICATE OF CONFORMANCE
Ramsbottom Carbon Residue Apparatus
K271XX
This certificate verifies that part number K271XX, Ramsbottom Carbon
Residue Apparatus, was manufactured in conformance with the applicable
standards set forth in this certification.
Specifications: ASTM D524
ASTM D3074
IP 14
ISO 4262
FTM 791-5002
NF T 60-117
This unit is tested before it leaves the factory, to ensure total functionality
and compliance to the above specifications and ASTM standards. Test and
inspection records are on file for verification.
Jesse Kelly
Application Engineer
Koehler Instrument Company
WEEE Directive Compliance Statement
Background
The goal of the WEEE Directive is to encourage design of environment-friendly products that increase
reuse, recycling and other forms of recovery to reduce waste streams and applies to listed Electronic
and Electrical Equipment (EEE) and Koehler's equipment falls broadly into Appendix 1A; Section 9
Monitoring and Control Equipment: Measuring, weighing or adjusting appliances for household or as
laboratory equipment.
Any associated non-embedded equipment such as Lighting (Saybolt Color) and PCs/Printers also fall
under WEEE. If provided with an order these ancillary items must be WEEE compliant. For these and
other reasons (printer cartridges are regionalized) the equipment must be supplied through a third
party supplier in Europe.
The WEEE Directive applies to electrical and electronic equipment falling under the categories set out
in Annex IA provided that the equipment concerned is not part of another type of equipment that does
not fall within the scope of this Directive. Annex IB contains a list of products which fall under the
categories set out in Annex IA.
http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2003:037:0024:0038:en:PDF
We do not qualify for any of the 10 exemption categories.
http://www.dpa-system.dk/en/WEEE/Products/Exemptions
Professional use
For equipment defined for ’professional use’ local authorities have no role to play. Producers and
importers are basically responsible for collection of WEEE recyclables from the professional user and
for subsequent management. A separate statement is given cataloging the items that require
separation from the equipment along with basic information on subsequent processing or recycling
prior to disposal of the equipment.
http://www.dpa-system.dk/en/WEEE/Products/Private-or-professional-use
Responsibility for Registration and Annual Reporting:
Koehler will not sell directly to end users in the EU and so has no responsibility to register within each
EU state and to make annual reports. Koehler declares that this responsibility is born by the importer
who is the first level of the distribution chain and is subject to producer responsibility. We will
communicate this in writing to our distributor/importers in the EU stating they are responsible to satisfy
WEEE registration and reporting requirements in the EU states where they conduct sales activities.
It is illegal to market electrical and electronic equipment covered by producer responsibility without
being registered.
http://www.dpa-system.dk/en/WEEE/Producers/Whoissubjecttoproducerresponsibility
Product Design
Koehler's designs allow for complete disassembly to a modular level which usually allows for standard
recycling. A qualified refrigeration system technician must be consulted when disassembling and de-
commissioning any equipment with refrigeration systems.
Koehler's scientific testing equipment is robustly designed to function over a long service life and are
typically repaired many times over the course of years rather than being replaced. We believe that re-
use and refurbishment is the very best form of re-cycling.
All batteries must be readily removable not soldered in place.
Recycling instructions
In the event that replacement becomes necessary, we will include instructions, particularized to each
instrument that informs the customer of their recycling responsibilities and giving them guidance in
doing this. All Koehler equipment has been placed on the market since 13th August 2005 and so
Koehler is defined as a "new WEEE producer". As such we must provide information on refurbishment,
treatment, and re-use.
Our instrument manual will include this compliance statement and indicate that any collection of
materials will be handled by their authorized distributor. In the event that the distributor is unreachable
or is no longer a distributor for Koehler Instrument, Co., other arrangements may be made including
accepting the materials directly.
Recycling is free of charge. Shipping is the responsibility of the end users. Whether shipping to a
distributor or to Koehler directly, safe, properly declared, and labeled packaging and shipping
expenses are the sole responsibility of the end user.
WEEE Marking
Since Koehler products are subject to the WEEE Directive we must display the WEEE symbol shown
above in accordance with European Standard EN 50419 on the equipment. It must be indelible, at
least 5mm in height, and clearly legible. If the equipment is too small the mark must be in the product
literature, guarantee certificate, or on the packaging. Rules on marking are established in section 49 of
the WEEE Order.
Koehler Instrument Company, Inc.
c/o RECYCLING
1595 Sycamore, Ave.
Bohemia, NY 11716
As a minimum the following substances, preparations and components have to be removed from any
separately collected WEEE:
- Mercury containing components, such as switches or backlighting lamps (compact fluorescent lamps,
CFL),
- Batteries
- Printed circuit boards if the surface of the printed circuit board is greater than 10 square centimeters
(about 4 sq in.),
- Toner cartridges, liquid and pasty, as well as color toner,
- Chlorofluorocarbons (CFC), hydrochlorofluorocarbons (HCFC) or hydrofluorocarbons (HFC),
hydrocarbons (HC)
- Liquid crystal displays (together with their casing where appropriate) of a surface greater than 100
square centimeters and all those back-lighted with gas discharge lamps,
- External electric cables
- Components containing refractory ceramic fibers as described in Commission Directive 97/69/EC of 5
December 1997 adapting to technical progress Council Directive 67/548/EEC relating to the
classification, packaging and labeling of dangerous substances (2),
- Electrolyte capacitors containing substances of concern (height > 25 mm, diameter > 25 mm or
proportionately similar volume)
2. The following components of WEEE that is separately collected have to be treated as indicated:
- Equipment containing gases that are ozone depleting or have a global warming potential (GWP)
above 15, such as those contained in foams and refrigeration circuits: the gases must be properly
extracted and properly treated. Ozone-depleting gases must be treated in accordance with Regulation
(EC) No 2037/2000 of the European Parliament and of the Council of 29 June 2000 on substances
that deplete the ozone layer (4).
K27190 Ramsbottom Carbon Residue
Operation and Instruction Manual
K27190-Manual 1
Table of Contents
1Introduction.........................................................................................2
1.1 Koehler’s Commitment to Our Customers................................................2
1.2 Recommended Resources and Publications............................................2
1.3 Instrument Specifications.........................................................................2
1.4 Software Specifications............................................................................3
2Safety Information and Warnings......................................................3
3Unpacking & Installation ....................................................................3
3.1 Packing List .............................................................................................3
3.2 Unpacking................................................................................................3
3.3 Instrument Installation..............................................................................4
3.4 Software Installation.................................................................................5
4Operation.............................................................................................5
4.1Instrument Descriptions ...........................................................................5
4.2 Instrument Operation...............................................................................5
4.3 Temperature Controller............................................................................6
5Safety Features ...................................................................................7
5.1 Over Temperature Protection...................................................................7
5.2 Over Power Protection.............................................................................8
6Maintenance ........................................................................................8
6.1 Routine Maintenance...............................................................................8
6.2 Replacement Parts ..................................................................................8
7Service .................................................................................................8
8Storage.................................................................................................9
9Warranty...............................................................................................9
10 Returned Goods Policy.......................................................................9
K27190 Ramsbottom Carbon Residue
Operation and Instruction Manual
K271XX-Manual 2
1 Introduction
The Koehler Ramsbottom Carbon Residue
Tester and Data Acquisition Software is the
latest design for performing the ASTM D524 test
method and related test specifications. The
tester determines the ‘carbon residue’ left after
evaporation and pyrolysis of a sample oil in the
Ramsbottom furnace, providing an indication of
the deposit forming tendencies of fuels and
guidelines for the processing of refinery
products.
This manual provides important information
regarding safety, technical reference, installation
requirements, operating condition specifications,
user facility resource requirements, and
operating instructions for the Ramsbottom
Carbon Residue Tester and Data Acquisition
Software. This manual should also be used in
conjunction with applicable published laboratory
procedures. Information on these procedures is
given in section 1.2.
1.1 Koehler’s Commitment to Our
Customers
Providing quality testing instrumentation and
technical support services for research and
testing laboratories has been our specialty for
more than 50 years. At Koehler, the primary
focus of our business is providing you with the
full support of your laboratory testing needs. Our
products are backed by our staff of technically
knowledgeable, trained specialists who are
experienced in both petroleum products testing
and instrument service to better understand your
requirements and provide you with the best
solutions. You can depend on Koehler for a full
range of accurate and reliable instrumentation
as well as support for your laboratory testing
programs. Please do not hesitate to contact us
at any time with your inquiries about equipment,
tests, or technical support.
Toll Free: 1-800-878-9070 (US only)
Tel: +1 631 589 3800
Fax: +1 631 589 3815
Email: info@koehlerinstrument.com
http://www.koehlerinstrument.com
1.2 Recommended Resources and
Publications
1. American Society for Testing and Materials
(ASTM)
100 Barr Harbor Drive
West Conshohocken, Pennsylvania 19428-
2959, USA
Tel: +1 610 832 9500
Fax: +1 610 832 9555
http://www.astm.org
email: service@astm.org
ASTM Publication:
ASTM D524
ASTM D6074
2. Energy Institute (IP)
61 New Cavendish Street
London, WIM 8AR, United Kingdom
Tel: 44 (0)20 7467 7100
Fax: 44 (0)20 7255 1472
http://www.energyinstpubs.org.uk/
IP Publication:
IP 14
3. Association Française de Normalisation
(AFNOR)
http://www.afnor.fr
AFNOR Publication:
NF T 60-117
4. Federal Test Method
FTM Publication:
FTM 791-5002
1.3 Instrument Specifications
Models:
K27100
K27190
Electrical
Requirements:
115V 60Hz, 20.8A
230V 50Hz, 10.9A
Temperature
Range:
Ambient to 650 °C (1200°F)
Dimensions:
(l x w xh)
16x21.5x14.5 (41x55x37)
Shipping Weight:
78 lbs (35kg)
Net Weight:
64lbs (29 kg)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipo de laboratorio de Koehler
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
