Kodak DCS Pro Back Plus Manual

P/N 6B5813 1 August 24, 2001

MAMIYA Interface Plate

To use the KODAK PROFESSIONAL DCS Pro Back or DCS Pro Back Plus (Pro Back/Pro Back Plus)

with the MAMIYA RZ67 PRO II camera body (MAMIYA camera body), you must first attach the

MAMIYA Interface Plate to the camera body.

1. Insert the four studs on the MAMIYA camera body into the four holes on the MAMIYA Interface

Plate.

2. Slide the Lock handle downward to secure the plate to the camera body.

3. Turn the lever on the Cable Release plug to O. (Refer to the picture on page 3.) Insert the plug into the

auxiliary release jack on the front of the RZ67, then turn the lever to L to lock the plug. (When

removing the cable, turn the lever from L to O and pull the plug out.)

Lock handle

lever

P/N 6B5813 2 August 24, 2001

4. Attach the Pro Back/Pro Back Plus to the MAMIYA Interface Plate as described in the DCS Pro Back

or DCS Pro Back Plus User’s Manual.

5. Once the Pro Back/Pro Back Plus is attached, lock the Shutter Release on the camera body by rotating

the Shutter Release lock as described in your RZ67 PRO II instruction manual. Use the Release button

on the Capture cable to capture images. (The Shutter Release on the camera body will not capture

digital images.)

6. On the side of the camera body, set the R-M lever to M. The camera body does not respond to Pro

Back/Pro Back Plus shutter release commands if the R-M lever is not in the M position.

Lens Sync Error

If the Pro Back/Pro Back Plus issues a shutter release command and a lens shutter opening is not detected,

the LCD displays the error message "Lens error: No sync detected!". If this error message appears when

using your MAMIYA RZ67 PRO II, check for the following:

• The Lens Sync Cable is not connected between the MAMIYA lens Flash Sync Terminal and the Pro

Back/Pro Back Plus’s Lens Sync Cable jack.

• The MAMIYA Interface Plate's Cable Release is not plugged into the RZ67 PRO II camera body's

auxiliary release jack. See step 3 on the previous page.

• The MAMIYA Interface Plate's Release button does not have its two white dots aligned. See

"Electromagnetic Cable Release" on the next page.

• The MAMIYA RZ67 PRO II camera body has not been wound. Push the Cocking Lever all the way

down.

• The MAMIYA RZ67 PRO II camera body R-M lever is not in the M position. See step 6 above.

• The MAMIYA RZ67 PRO II camera body's Shutter Speed dial is at the AEF setting and an AE

viewfinder is not installed, or the dial is at the RBL setting and an RB lens is not installed.

• The Shutter Release collar is in the Emergency Shutter Operation position. Lock the Shutter Release

Button as described in step 5 above.

Release button

P/N 6B5813 3 August 24, 2001

Electromagnetic Cable Release

Release Button

The Release button is a two-step position button. Each position provides a different function.

• Lightly press the Release button halfway down to collect photometric data.

• Press the button fully down to perform a shutter release.

When the two white dots are aligned, the ring is in the correct position for metering and shutter release.

When taking long time (LT) exposures in Bulb mode, lock the Release button by turning the outer ring

clockwise and aligning the orange dot with the white dot. The Shutter release locks. To disengage a locked

Shutter release, turn the ring counterclockwise and return the orange dot to its original position.

NOTE: We do not recommend Pro Back/Pro Back Plus exposures that exceed 1/4 second shutter times.

Orange dot

Long time

White dots

Release button

lever

Cable Release plug

Otros manuales para DCS Pro Back Plus

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara digital de Kodak

Kodak

Kodak PRINTOMATIC Manual técnico

Kodak

Kodak EasyShare C195 Manual de usuario

Kodak

Kodak EasyShare P850 zoom Manual de usuario

Kodak

Kodak EasyShare-one Manual de usuario

Kodak

Kodak PIXPRO SL10 Manual de usuario

Kodak

Kodak M420 - EasyShare 10MP 4x Optical/5x Digital Zoom HD... Manual de usuario

Kodak

Kodak 1920297 Manual de servicio

Kodak

Kodak PIXPRO ORBIT360 4KVR360 Manual de usuario

Kodak

Kodak DC5000 Manual de usuario

Kodak

Kodak Pixpro FZ102 Manual de usuario

Kodak

Kodak EASYSHARE M522 Manual de usuario

Kodak

Kodak DX4330 - Easyshare Zoom Digital Camera Manual de usuario

Kodak

Kodak PIXPRO AZ528 Manual de usuario

Kodak

Kodak M853 - EASYSHARE Digital Camera Manual de usuario

Kodak

Kodak PLAYSPORT Zx3 Manual de usuario

Kodak

Kodak EasyShare LS753 Manual de usuario

Kodak

Kodak PIXPRO AZ652 Manual de usuario

Kodak

Kodak EASYSHARE Z8612 IS Manual de usuario

Kodak

Kodak MD81 - Easyshare Digital Camera Manual de servicio

Kodak

Kodak Pixpro AZ525 Manual de usuario

Kodak

Kodak Advantix Advantix Preview Manual de usuario

Kodak

Kodak EASYSHARE EasyShare C 503 Manual de usuario

Kodak

Kodak PIXPRO FZ45-WH Manual de usuario

Kodak

Kodak PIXPRO FZ41 Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario