KoamTac KDC270 Manual de usuario

QG_KDC270_KDC280_20201014

KDC270/280

116 Village Blvd, Suite 305, Princeton, NJ 08540 USA

T: + 1-609-256-4700 F: +1-609-228-4373

info@koamtac.com www.koamtac.com

KDC270/280

Quick Guide

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p1

Contents

1. Product Introduction.........................................................................................................................................2

1.1 KDC270/280 Diagram................................................................................................................................2

1.2 How to turn on and off ..............................................................................................................................2

2. Bluetooth Pairing ..............................................................................................................................................3

2.1 Bluetooth Profiles Explained.....................................................................................................................3

2.2Pairing a KDC270 to your smart device.....................................................................................................4

2.3 Bluetooth Pairing a KDC280 to your smart device with special barcodes ...............................................5

3. Usage ................................................................................................................................................................7

3.1 Using Keyboard Wedge (HID Keyboard) ..................................................................................................7

3.2 Using KTSync – Android/iOS ....................................................................................................................7

3.3 Using KTSync Keyboard – Android ...........................................................................................................8

3.4 Using KTSync Keyboard – iOS ..................................................................................................................9

3.5 Using other Developed Applications with SDK – Android/iOS..............................................................10

4. Product Specifications ....................................................................................................................................11

5. How to Use Tizen WebApp Demo Application (Only for KDC280) ...............................................................13

5.1 Connect the phone to Gear S3 and Install the demo application..........................................................13

5.2 Pair/Connect KDC with Gear S3..............................................................................................................14

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p2

Product Introduction

The KDC270 Bluetooth barcode scanner is a 1D Laser, CCD, or 2D Imager Bluetooth Barcode Data Collector.

The KDC 280 is a 2D Imager Bluetooth Barcode Datta Collector that supports Bluetooth Low Energy (BLE).

1.1 KDC270/280 Diagram

1.2 How to turn on and off

Refer to the figure in section 1.1 to locate the SCAN button.

a) Press SCAN button for 3 seconds.

b) The KDC will beep when it is turned ON.

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p3

Bluetooth Pairing

Connecting your KDC using Bluetooth is made easy with the below pairing barcodes. If you are unsure which

profile is right for you, please visit www.koamtac.com for more information.

2.1 Bluetooth Profiles Explained

a. HID Profile: Allows one-way Bluetooth communication with an Android or iOS host

device. The KDC only transmits data to the host device.

b. SPP Profile: Allows two-way Bluetooth communication. The KDC transmits data to the

host device and the host device can transmit data back to the KDC.

c. HID Windows Profile: Allows one-way Bluetooth communication with Windows host

device. The KDC only transmits data to the host device.

Note:HID inputs data directly into an application. SPP requires the KOAMTAC SDK to

input data into an application. To gain access to the SDK, please complete the form here:

https://www.koamtac.com/sdk/

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p4

2.2 Pairing a KDC270 to your smart device

1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.

2. Ensure that Bluetooth is enabled on the host device and searching for devices.

3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth

profile. If you are unsure which Bluetooth profile is right for you, please refer to the

previous panel.

4. Check the list of available Bluetooth devices on your host device.

5. From the list, select KDC270 listed by serial number in brackets that matches the serial

number found on the back side of the KDC270.

6. In HID mode, KDC270 is now ready to use.

7. To complete connection in SPP/MFi mode, launch KTSync or your application and

select KDC270.

* The KDC270 will beep when successfully connected.

Android, Mac, Windows: HID Normal

SPP & MFi

iOS: HID iOS

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p5

2.3 Bluetooth Pairing a KDC280 to your smart device with special barcodes

Bluetooth Profile & Pairing

#1. HID-BLE & Pairing (Android, iOS, Mac)

#2. HID-Windows & Pairing (Windows)

#3. SPP-BLE & Pairing (Android, iOS, Mac, Windows)

a. Navigate to the Bluetooth setting on the host device and ensure that Bluetooth is both

enabled and searching for devices.

b. Using the KDC, scan the pairing barcode above that corresponds to your desired

Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer

to Chapter section 2.1.

•If you use an Android, iOS, or Mac device and desire an HID connection, then scan

barcode #1 above.

•If you use a Windows device and desire an HID connection, then scan barcode #2

above.

•If you desire an SPP connection for any device, then scan barcode #3 above.

c. In HID or HID Windows Profile, check the list of available Bluetooth devices on your host

device. From the list, select the KDC280 listed by serial number in brackets that matches

the serial number found on the back side of the KDC280. KDC280 will beep upon

connection and display “Bluetooth Connected” on its screen. Now it is ready to use.

d. In SPP Profile for non-iOS, check the list of available Bluetooth devices on your host

device. From the list, select the KDC280 listed by serial number in brackets that matches

the serial number found on the back side of the KDC280. KDC280 will beep upon

connection and display “Bluetooth Connected” on its screen, but you should launch

KTSync or your application and select KDC280 within the application to complete the

connection. Now it is ready to use.

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p6

e. In SPP Profile for iOS, the KDC is NOT listed on your host device, so you should launch

KTSync or your application and select the KDC280 listed by serial number in brackets that

matches the serial number found on the back side of the KDC280. KDC280 will beep upon

connection and display “Bluetooth Connected” on its screen. Now it is ready to use.

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p7

Usage

3.1 Using Keyboard Wedge (HID Keyboard)

This option is only available using Bluetooth connection with HID profile.

Once the KDC is paired with the host, open any application with a text field and tap on the text field. Scan any

barcode and it will populate in the text field.

3.2 Using KTSync – Android/iOS

You can use KTSync to utilize your KDC alone or with a native application. This is only available using

Bluetooth connection with SPP or MFi.

a) Download and install KTSync from the Google Play Store or the Apple App Store.

b) Open KTSync and tap on the “Connect” option on the bottom left to view a list of available devices.

(Fig. 1)

c) From the device list, select your KDC – ensuring that the serial number displayed in brackets matches

the serial number on the back of your KDC. (Fig. 2)

d) Upon successful connection, KTSync will display “Connected” next to the name of your KDC at the top

of the application. (Fig. 3)

e) To test your connection, scan any barcode. If the connection is successful, the barcode data will display

on the screen. (Fig. 3)

< Fig. 1 > < Fig. 2 > < Fig. 3 >

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p8

3.3 Using KTSync Keyboard – Android

Once your KDC is connected to KTSync, you can use your KDC as a keyboard.

a) While KTSync is running in the background, navigate to Settings > Language & Input > Virtual

Keyboard > Manage keyboards

b) Tap on “KTSync Keyboard” to enable it.

c) Change “KTSync Keyboard” to the default keyboard. (Fig. 4)

To switch back to the previous keyboard, simply change the default keyboard again. Or, when a text field is

selected swipe down from the top of the screen to bring up the notification panel. Select ‘choose input

method’ and you can select the default keyboard from here. (Fig. 5)

< Fig. 4 > < Fig. 5 >

KDC270/280

Quick Guide

See Reference Manual for more detailed information

Visit store.koamtac.com to purchase additional products and accessories.

QG_KDC270_KDC280_20201014 p9

3.4 Using KTSync Keyboard – iOS

Once your KDC is connected to KTSync, you can use your KDC as a keyboard.

a) Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards > Add New Keyboard...

> Select the KTSync keyboard to be added. (Fig. 6)

b) Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)

< Fig. 6 > < Fig. 7 >

c) Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears.

d) Press and hold the globe icon located to the left of the spacebar.

e) Select the KTSync Keyboard and begin scanning. (Fig. 8)

< Fig. 8 >

Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work.

Otros manuales para KDC270

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de KoamTac

KoamTac

KoamTac KBM-XP67 Manual de usuario

KoamTac

KoamTac KDC200 KDC250 Manual de usuario

KoamTac

KoamTac KDC180 Manual de usuario

KoamTac

KoamTac KDC485ER Manual de usuario

KoamTac

KoamTac KDC350 Wi-Fi Manual de usuario

KoamTac

KoamTac KDC 470 Manual de usuario

KoamTac

KoamTac KDC20 Manual de usuario

KoamTac

KoamTac KDC280NA QG Manual de usuario

KoamTac

KoamTac KDC100 Manual de usuario

KoamTac

KoamTac SKXPro Manual de usuario

KoamTac

KoamTac KDC185 Manual de usuario

KoamTac

KoamTac KDC20 Manual de usuario

KoamTac

KoamTac KDC185 QG Manual de usuario

KoamTac

KoamTac SLED-mPOS Manual de usuario

KoamTac

KoamTac KDC250 Manual de usuario

KoamTac

KoamTac KDC480 QG Manual de usuario

KoamTac

KoamTac KDC 470 Manual de usuario

KoamTac

KoamTac KDC470 UHF Manual de usuario

KoamTac

KoamTac KDC20 Manual de usuario

KoamTac

KoamTac KDC20 Manual de usuario

KoamTac

KoamTac KDC 470 Manual de usuario

KoamTac

KoamTac KDC350-R2 Manual de usuario

KoamTac

KoamTac KDC200 KDC250 Manual de usuario

KoamTac

KoamTac KDC100 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario