Kitsound SLAM 2 Manual de usuario
USER MANUAL
SLAM 2
BLUETOOTH®
SPEAKER
JB. 5108-b / Made in China. © KitSound is a trademark of Kondor Limited, 2018. Christchurch, Dorset, BH23 4FL, UK
kitsound.co.uk
Your product and batteries must be recycled or disposed of properly.
Please contact your local recycling centre for more information on proper disposal.
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from
household waste at the end of their useful life. Please DO NOT dispose of this appliance in normal
household waste. Your local appliance retailer may operate a ‘take-back’ scheme when you are
ready to purchase a replacement product, alternatively contact your local government authority
for further help and advice on where to take your appliance for recycling.
Please recycle this packaging responsibly.
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner
is aliated with KitSound or endorses the products herein.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by Kondor Ltd. is under license. Other trademarks
and trade names are those of their respective owners.
2 3
Please read this manual carefully
before use.
Box contents
• KS Slam 2 Bluetooth Speaker
• Micro USB Charge cable
• 3.5 mm to 3.5 mm Aux in cable
• User manual
Functions
1. On/O
2. Play/Pause/Call handling
3. Decrease volume/Previous track
4. Increase volume/Next track
5. Input indicator LED
6. Microphone
7. Micro USB Charging port
8. Charge indicator LED
9. USB Charging port
10. Aux-in port
IPX5 rating
The Slam 2 is rated IPX5. This means that the Slam 2 is splash resistant, but is not impervious to large
amounts of water. Please make sure that the protective rubber cover is secure. If the Slam 2 has got
damp/wet during use, we recommend drying it o to help prevent any damage from occurring.
Instructions for use
Charging the speaker
Give the speaker a full charge before its rst use.
1. Plug the Micro USB charging cable into the Micro USB Charging port (7) and plug into power
2. The Charge indicator LED (8) will be red whilst charging
3. A full charge will take up to 3-4 hours
4. Once fully charged the Charge indicator LED (8) will turn o
Note: Allow up to 4 hours for the rst charge
7 9 10
13 24
8
5 6
4 5
Re-pairing or pairing new devices
1. Turn Bluetooth o on any previously paired devices
2. Follow the ‘Pairing the speaker to your device’ instructions
OR
1. Turn o the speaker by holding the On/O button (1) for 3 seconds
2. Turn the speaker on again and re-enter pairing mode by holding the On/O button (1) for 5 seconds
3. Follow the ‘Pairing the speaker to your device’ instructions
Charging your mobile or device with the speaker
• Turn the Slam 2 on by holding the On/O button (1) for 1 second
• Connect the USB charging cable for your device to the USB charging port (9) and then
connect your device
Pairing the speaker to your device
• Turn the Slam 2 on by holding the On/O button (1) for 1 second
• The Slam 2 will automatically enter pairing mode if a previously paired device is not detected
• The Input indicator LED (5) will ash blue whilst in pairing mode
• Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices.
• Select ‘KS SLAM 2’. If asked for a passcode, enter ‘0000’
• Once paired, the speaker will play an audio tone and the Input indicator LED (5) will shine a solid blue
6 7
Auxiliary
1. Plug a 3.5 mm to 3.5 mm auxiliary cable into the speaker’s Aux-in port (10) and your device
2. The Input indicator LED (5) will be solid purple
3. Short press Decrease volume (3) to decrease volume
4. Short press Increase volume (4) to increase volume
Note: Changing track and call handling will not be active during this mode
Please note
Your device will have an internal amplier and if it is playing digital les like MP3s it will also have an integrated
DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted
signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run
your device any higher than 95% volume. Some devices output higher than others, so you may need to
reduce the volume if you experience distortion.
Playing music on your speaker
Bluetooth
When connected via Bluetooth, play the music on your device and the sound will play through the
speaker. Some devices may require you to select the audio output. When music is playing the Input
indicator LED (5) will slowly ash blue.
Skip track Long press Next track (4)
Previous track Long press Previous track (3)
Play/Pause Short press Play/Pause (2)
Volume– Short press Decrease volume (3)
Volume+ Short press Increase volume (4)
Call handling
Taking calls with the Slam 2 is only activated while connected via Bluetooth to your device. To be heard
clearly, please speak towards the built-in Microphone (6).
Answer call Short press Play/Pause (2) when call incoming
End call Short press Play/Pause (2) during a call
Reject call Long press Play/Pause (2) when a call is incoming
Redial last dialled call Double press Play/Pause (2)
8 9
Care for your Slam 2
Please DON’T:
• Submerge the Slam 2
• Drop the Slam 2 as this will invalidate your warranty
• Open up the Slam 2. There are no user serviceable parts inside
• Expose the Slam 2 to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
• Clean the Slam 2 with a soft dry cloth and no detergents
Specications
Works with Bluetooth®V4.2
Bluetooth range up to 10 m
S/N 69 dB
Frequency response 60 Hz – 20 kHz
Drivers 2 x 51 mm
Output RMS 2 x 10 W @ 4 ohm
Play time up to 10 hours
Charging time up to 3-4 hours
USB charge output 1 A
Dimensions (mm) H246 x W103 x D95
Weight 850 g
10
The use and operation of this speaker is beyond our control. Warranty of the KS SLAM 2 is limited to defects caused by faulty manufacture
or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded,
non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems with
‘Hereby, Kondor Ltd declares that the radio equipment type,
KSSLA2 SLAM 2 Bluetooth Speaker, is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://kondor.co.uk/product-documents.’
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product
improvement and development.
Tabla de contenidos
Otros manuales de Oradores de Kitsound
Kitsound
Kitsound CUBE Manual de usuario
Kitsound
Kitsound BOOMBAR 2 Manual de usuario
Kitsound
Kitsound MINI MOVER 20 Manual de usuario
Kitsound
Kitsound BOOMBAR Manual de usuario
Kitsound
Kitsound BOXI MINI Manual de usuario
Kitsound
Kitsound Hive2o Manual de usuario
Kitsound
Kitsound GLOW Manual de usuario
Kitsound
Kitsound Podium Manual de usuario
Kitsound
Kitsound VOICE ONE Manual de usuario
Kitsound
Kitsound VOICE ONE Manual de usuario
Kitsound
Kitsound MIAMI Manual de usuario
Kitsound
Kitsound BOOGIE BUDDY Manual de usuario
Kitsound
Kitsound HIVE X Manual de usuario
Kitsound
Kitsound Glow Stereo Manual de usuario
Kitsound
Kitsound POCKET HIVE Manual de usuario
Kitsound
Kitsound BoomBar+ Manual de usuario
Kitsound
Kitsound HAWAII 1.0 Manual de usuario
Kitsound
Kitsound hive evolution Manual de usuario
Kitsound
Kitsound POCKETBOOM Manual de usuario
Kitsound
Kitsound SOUL 2 Manual de usuario
