Kitsound HIVE Manual de usuario
USER MANUAL
HIVE
WIRELESS
SPEAKER
kitsound.co.uk
Li-PO
Do not dispose of Lithium Polymer
batteries with general waste.
Please return it to battery recycling
collection point
We are craftspeople. We are musicians. We are KitSound™
And we all commit ourselves to achieving one shared goal: Bringing
people closer to their music. By truly understanding music we stay true
to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.
At KS we believe your music deserves to be showcased on great
quality products that don’t cost the earth. We might not all share the
same taste in music (the ferocious disputes on music forums prove
that), but whether it’s Irish folk, death metal or any number of obscure
genres which seem to be multiplying by the minute, the artists
responsible for connecting with you through their craft have bared
their souls to do so. And we think that’s worth celebrating.
6 7
First time charging the battery
The unit has a built-in rechargeable lithium battery. Connect the one
end of the USB power cable to the charging port of the main unit and
connect the other end to your PC. The battery will start charging.
Note:
• It takes approx. 4 hours to fully charge the battery
• Whilst charging, the LED will show red
• When full charged, the LED will turn green
• A fully charged unit has up to around 6-10 hours of playback time
• You can charge and play music at the same time
• When the battery is below 25% the battery LED will show red
MICRO USBOFF ONAUX
1 2 3 3 4 5
1. Bluetooth/Play/Pause
2. Volume –
3. Volume +
3. AUX in
4. Power switch
5. Micro USB charging port
8 9
Battery protection mode
If you haven’t used the speaker for 50 days, the speaker will switch
to battery protection mode automatically.
To keep to the rechargeable battery in good condition, please
discharge & recharge speaker every 3 months.
Cancel the battery protection mode:
1. Turn the ON/OFF switch to off side, and then turn the switch
to ON again.
2. Connect the computer or USB charge with the DC USB cable.
Bluetooth pairing
1. Switch power button to ON position, then press and hold the
Bluetooth button for 5 seconds and the indicator light will flash
red and blue alternately.
2. Search for the system with your Bluetooth device and you should
see “Hive”. Enter password ’0000’ if requested.
3. When the pairing is successful, the Bluetooth indicator light will
flash slowly.
10 11
Using the speaker
1. Volume change is done on both the speaker and the device you
are playing from
2. (Vol+) Press + on the speaker
3. (Vol-) Press - on the speaker
4. (Play/Pause) Press the button (may not work on all devices)
AUX in
Use a 3.5 mm AUX in cable to connect your Bluetooth speaker through
the AUX in socket at the bottom of the unit.
Note:
When you plug AUX in cable into AUX in socket, the current Bluetooth
connection will disconnect; when you unplug the AUX in cable, the
Bluetooth connection will resume.
12 13
Hands-free
• When you have an incoming call, the music will pause
• Answer the call: Press the button once
• End the call: Press the button once
• To redial the last called number, press the button twice
Care and maintenance
Wipe the unit with a soft dry dust cloth. Do not use any wax, polish
sprays or abrasive cleaners on them.
Caution: Never allow any water or other liquids to get inside the unit
while cleaning.
Troubleshooting
We hope you’ve now got all the information you need to get started,
but if you’re having problems with anything, please feel free to
contact us at: support@kitsound.co.uk
14 15
Specifications
• Bluetooth: v2.1
• Bluetooth range: up to 10 m
• Play time: up to 10 hours
• Output RMS: 5 W RMS (2.5 W @ 4 ohm x 2)
• S/N: 78 dB
• Frequency response: 50 Hz – 20 kHz
• Aux-in: 3.5 mm
• Unit size: D49 x H64 x W165 (mm)
• Weight: 400 g
Box contents
• KS Hive portable speaker
• USB charge cable
• 3.5 mm cable
• Carry bag
Notes
The Hive has been optimised for use with as many devices as possible,
so if you are experiencing distortion at full volume, simply reduce the
volume slightly to improve the sound quality.
We apologise for any inconvenience caused by minor inconsistencies in these instructions,
which may occur as a result of product improvement and development.
Tabla de contenidos
Otros manuales de Oradores de Kitsound
Kitsound
Kitsound Hive Discovery Manual de usuario
Kitsound
Kitsound SOUL Manual de usuario
Kitsound
Kitsound Mini Buddy Manual de usuario
Kitsound
Kitsound hive evolution Manual de usuario
Kitsound
Kitsound Sonar Manual de usuario
Kitsound
Kitsound BoomBar+ Manual de usuario
Kitsound
Kitsound MINI MOVER 20 Manual de usuario
Kitsound
Kitsound Chorus Manual de usuario
Kitsound
Kitsound VOICE ONE Manual de usuario
Kitsound
Kitsound REUNION Manual de usuario
Kitsound
Kitsound Glow Stereo Manual de usuario
Kitsound
Kitsound DANCEFLOOR Manual de usuario
Kitsound
Kitsound CUBE Manual de usuario
Kitsound
Kitsound UPSTAGE Manual de usuario
Kitsound
Kitsound BOOGIE BUDDY Manual de usuario
Kitsound
Kitsound BOOMBAR Manual de usuario
Kitsound
Kitsound POCKETBOOM XB Manual de usuario
Kitsound
Kitsound GLOW Manual de usuario
Kitsound
Kitsound Hive2o Manual de usuario
Kitsound
Kitsound FLAIR Manual de usuario
