Kitsound FLAIR Manual de usuario

All trademarks are acknowledged as the property of their respective owners.

Unless otherwise stated their use does not imply that the trademark owner is aliated

with KitSound or endorses the products herein.

JB. 4115 / Made in China. © KitSound™ 2015. Christchurch, Dorset, BH23 4FL, UK

FLAIR

bLuetooth

SPeAKeR

USER MANUAL

We are craftspeople. We are musicians. We are KitSound™

And we all commit ourselves to achieving one shared goal:

Bringing people closer to their music. By truly understanding

music we stay true to its craft. Pure, rich, incredible sound.

We’ll settle for nothing less.

At KS we believe your music deserves to be showcased on great

quality products that don’t cost the earth. We might not all share

the same taste in music (the ferocious disputes on music forums

prove that), but whether it’s Irish folk, death metal or any number

of obscure genres which seem to be multiplying by the minute, the

artists responsible for connecting with you through their craft have

bared their souls to do so. And we think that’s worth celebrating.

Like the musicians we’re honouring, we’re obsessed with our craft;

ne-tuning and tweaking our products to make sure we constantly

deliver full-bodied, symphonic sound. So from a single note played

on a piano, to the full impact of a bass guitar, you can rest assured

that you’ll always be doing justice to your music.

8 9

Please read this manual carefully before use.

Box contents

• KS Flair Bluetooth speaker

• Power adaptor

• 3.5 mm aux-in cable

• User manual

Functions

1. On/O button

2. LED light indicator

3. Previous track button

4. Next track button

5. Volume–

6. Volume+

7. Play/Pause

8. Headphone port

9. Aux-in port

10. USB charging port

11. LED charge light indicator

8 9 10 11

1 32 5 6 74

Instructions for use

Getting started

• Short press On/O (1) to turn the speaker on. LED Light indicator (2) will ash blue and will automatically be in

pairing mode

• Press and hold On/O (1) to turn the speaker o

Charging the speaker

It is recommended that you give the speaker a full charge before its rst use.

1. Plug the micro USB end of the charge cable into the speaker

2. Plug the standard USB cable end into either a computer or a USB mains charger

3. The LED charge indicator (11) will be solid red whilst charging

4. When charging is complete, the LED charge indicator (11) will turn o

Note: It may take up to 5 hours before the speaker is fully charged. It may take a little longer for rst charge.

10 11

Bluetooth setup

Pairing the speaker to your device

Before you can use the speaker via Bluetooth, it will need to be paired to your device.

To do this:

1. Short press On/O (1) to turn the Flair on

2. After 6 seconds, the speaker will automatically enter pairing mode

3. The Bluetooth indicator light will be ashing blue quickly

4. Turn your device’s Bluetooth ON and search for new devices

5. When KSFLAIR appears in the list, select it and if asked for a passcode, enter ‘0000’

6. The speaker should then be paired to your device and the LED light indicator (2) will be a solid blue and slowly

ashing blue when playing music

7. To un-pair, press and hold play/pause (7) and the LED light indicator will be quickly ashing blue and the Flair

will automatically go back to pairing mode

To pair additional devices to the speaker, rst make sure the Bluetooth on any devices that have already been paired

to the speaker is turned o. Then follow the above instructions from step 1.

Playing music on your speaker

Bluetooth

If already connected to the speaker via Bluetooth, simply nd and play the music on your device and the sound will

play through the speaker. Some devices may require you to select the audio output. You should be able to do this by

going to the ‘Listen via’ or ‘Play via’ menu. If unsure, please refer to your device’s manual.

If you are using an A2DP Bluetooth-enabled device, you will be able to use the following functions on the speaker:

• Play/Pause (7) – short press

• Next track (4) – short press

• Previous track (3) – short press

• Volume– (5) – short press

• Volume+ (6) – short press

12 13

Auxiliary

Using the provided cable, you can connect your device directly to the speaker. To use this, simply:

−Plug the cable into the speaker’s Aux-in port (9) and your device

−The LED light indicator (2) will be a solid red once connected

−Press play on your device

• Volume– (5) – short press

• Volume+ (6) – short press

When playing music using the cable, you will not be able to use the Play/Pause, Next track and

Previous track functions.

Headphone Jack

You can connect headphones to you speaker. To do this, simply:

• Connect your speaker to your device using either Bluetooth or auxiliary

• Plug you headphone cable into the headphone port (8)

• Not compatible with CTIA cables

Please note: Your device will have an internal amplier and if it is playing digital les like MP3s it will also have an

integrated DAC (Digital Audio Converter). If you turn the volume up to 100%, your device will be sending a distorted

signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run your device

any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you

experience distortion.

Call Handling

While in Bluetooth mode you can make and take phone calls. You can use your device to answer/end/reject

the phone call or you can use your speaker.

• Answer – Short press Play/Pause (7)

• End – Short press Play/Pause (7)

• Reject – Long Press (3 seconds) Play/Pause (7)

Note: You can still take calls while in Auxiliary mode. However this will automatically turn your smartphone

to loud speaker mode – you won’t be able to control the call from the speaker.

14 15

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement

and development.

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems with anything,

please feel free to contact us on: [email protected]

The use and operation of this speaker is beyond our control. Warranty of the FLAIR is limited to defects caused by

faulty manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the

user under any circumstances.

This does not aect your statutory rights.

Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product

has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause

personal injury and will damage the product.

Making any attempt to open the product or carry out repair voids any and all warranties

Care for your Flair

Please DON’T:

• Get the Flair wet

• Drop the Flair as this will invalidate your warranty

• Open up the Flair. There are no user serviceable parts inside

• Expose Flair to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO:

• Clean the Flair with a soft dry cloth and no detergents

Specications

S/N 60 dB

Bluetooth V2.1 A2DP, AVRCP

Bluetooth range up to 10 m

Frequency response 80 Hz – 18 kHz

Drivers 2 x 50 mm

Output RMS 2 x 5 W @ 4 ohm

Play time up to 8 hours

Charging time up to 5 hours

Battery Capacity 2200 mAh

Tabla de contenidos

Otros manuales de Oradores de Kitsound

Kitsound

Kitsound Hive Discovery Manual de usuario

Kitsound

Kitsound HIVE 2 Manual de usuario

Kitsound

Kitsound BOXI MINI Manual de usuario

Kitsound

Kitsound hive evolution Manual de usuario

Kitsound

Kitsound MINI MOVER 20 Manual de usuario

Kitsound

Kitsound GLOW Manual de usuario

Kitsound

Kitsound IGNITE Manual de usuario

Kitsound

Kitsound CUBE Manual de usuario

Kitsound

Kitsound DIGGIT XL Manual de usuario

Kitsound

Kitsound SOUL 2 Manual de usuario

Kitsound

Kitsound BOOMBAR Manual de usuario

Kitsound

Kitsound BOOMBAR 2 Manual de usuario

Kitsound

Kitsound HIVE X Manual de usuario

Kitsound

Kitsound UPSTAGE Manual de usuario

Kitsound

Kitsound Glow Stereo Manual de usuario

Kitsound

Kitsound Mini Buddy Manual de usuario

Kitsound

Kitsound OVATION Manual de usuario

Kitsound

Kitsound KS SLAM XL Manual de usuario

Kitsound

Kitsound HAWAII 1.0 Manual de usuario

Kitsound

Kitsound Podium Manual de usuario

Kitsound

Kitsound Hive 2 Manual de usuario

Kitsound

Kitsound SOUL Manual de usuario

Kitsound

Kitsound HIVE Manual de usuario

Kitsound

Kitsound SLAM 70 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario