Kisai RPM Manual de usuario
Change the way you think about time
INSTRUCTION MANUAL
Button A
USB Charging Jack
Button B
• Press button A to display the time.
• All LEDs will light up and the time will be shown.
• The current time is indicated by the blinking LEDs.
• The time display will turn off after 7 seconds.
Hours: 1-12
PM / Charging indicator
Minutes: Groups of 5
5, 10, 15, 20, etc
1. How to read the time
Minutes: 1-4
Examples 3:49
the 3 o’clock light is flashing
the 45 minute light is flashing
4 minute lights are flashing
• Press and hold button B for 3 seconds to enter setting
mode.
*Note after 7 seconds of inactivity setting mode will deactivate*
• The hour LEDs will flash when you are in hour setting
mode.
• Press button A to increase the hours as required.
• The PM indicator will flash to indicate PM mode.
• Press button B to confirm and move to the minutes.
2. How to set the time and animation
I. Setting the hour
PM / Charging indicator
6:06
the 6 o’clock light is flashing
the 5 minute light is flashing
1 minute lights is flashing
• The minute LEDs will flash when you are in minute
setting mode.
• Press button A to increase the minutes as required.
• Press button B to confirm and move to the animation.
II. Setting the minutes
* This watch has a light-up animation feature. The LEDs
will animate once every 15 minutes between 6pm and
12am.
• In setting mode, when the animation feature is on,
the LEDs will animate.
• In setting mode, when the animation feature is off,
all LEDs will flash.
• Press button A to turn the animation on or off.
• Press button B to confirm and when the LEDs go out,
setting is complete.
*Note after 7 seconds of inactivity setting mode will deactivate*
III. Setting the animation
• This watch has a USB rechargeable battery.
• When the lights become dim or do not light up, you should
recharge the battery.
• To recharge the battery, unscrew the USB cap using the
screw driver provided and connect the USB charging cable
to the USB charging jack.
• Connect the charging cable to a power source,
e.g. your computer.
• When charging, the LED charging indicator will blink.
• When the charging indicator stops blinking, the battery is
90% charged.
It is advised that you continue to charge the battery for a
full 3.5 hours to ensure the battery is 100% charged.
3. How to recharge the battery
PM / Charging indicator
• It is advised that you use the screw driver provided when
opening the USB cap so as not to damage the head of
the screw.
• Items included in the box:
• Watch
• USB cable
• Spare USB cap
• Screwdriver
• Instruction Manual
• This watch is covered by a 1 year manufacturers warranty.
This warranty does not cover water damage, accidental
damage, neglect or unauthorized repair.
II. Warranty
• This watch uses an LIR 2032 rechargeable battery only.
• The LIR 2032 rechargeable battery is replaceable.
• Battery lifetime will vary depending on use, but is estimated
at approximately 300 charges.
• To maximize battery life, turn the animation off.
• The plug standard input voltage for the LIR 2032 battery is
DC5V. You should use only the cable provided with the
watch when recharging.
4. User informations
I. Battery
• This watch has limited resistance to water. Please do not
use the watch in the shower, for swimming or for other
water related activities.
III. Caution
Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Strap Materials
Finish
Weight
Battery
Wood
42.5mm x 50mm x 14mm
210mm (approx.)
LED Digital Tube
Wood
Clear Coating
68g
3.6V LIR 2032 Rechargeable
SPECIFICATIONS
Tabla de contenidos
Otros manuales de Mirar de Kisai
Kisai
Kisai ADJUST Manual de usuario
Kisai
Kisai Xtal Manual de usuario
Kisai
Kisai Satellite-X Manual de usuario
Kisai
Kisai Seven Manual de usuario
Kisai
Kisai Zone Manual de usuario
Kisai
Kisai Stencil Manual de usuario
Kisai
Kisai MAZE Manual de usuario
Kisai
Kisai Blade Manual de usuario
Kisai
Kisai Radioactive Manual de usuario
Kisai
Kisai OPTICAL ILLUSION Manual de usuario
