Kisai Radioactive Manual de usuario
Change the way you think about time
INSTRUCTION MANUAL
Button A
Button B
USB Port
1. How to read the time
Press button A to display the time.
All LEDs will light up and the time will be shown.
The current time is indicated by the blinking LEDs.
The time display will turn off after 7 seconds.
Hours: 1-12
Minutes: Groups of 5
5, 10, 15, 20, etc
Minutes: 1-4PM / Charging indicator
•
•
•
•
Examples
3:06 8:32
3 o’clock light is flashing
5 minute light is flashing
1 minute light is flashing
8 o’clock light is flashing
30 minute light is flashing
2 minute lights are flashing
Press and hold button B for 3 seconds to enter setting mode.
*Note after 7 seconds of inactivity setting mode will deactivate
The hour LEDs will flash when you are in hour setting
mode.
Press button A to increase the hours as required.
The PM indicator will flash to indicate PM mode.
Press button B to confirm and move to the minutes.
2. How to set the time and animation
i. Setting the hour
PM / Charging indicator
The minute LEDs will flash when you are in minute setting
mode.
Press button A to increase the minutes as required.
Press button B to confirm and move to the animation.
ii. Setting the minutes
•
•
•
•
•
•
•
•
* This watch has a light-up animation feature. The LEDs
will animate once every 15 minutes between 6pm and
12am.
In setting mode, when the animation feature is on, the
LEDs will animate.
In setting mode, when the animation feature is off, all
LEDs will flash.
Press button A to turn the animation on or off.
Press button B to confirm and when the LEDs go out,
setting is complete.
*Note after 7 seconds of inactivity setting mode will deactivate
iii. Setting the animation
•
•
•
•
•
•
•
•
•
•
•
This watch has a USB rechargeable battery.
When the lights become dim or do not light up, you should
recharge the battery.
To recharge the battery, unscrew the USB cap using the screw
driver provided and connect the USB charging cable to the USB
charging jack.
Connect the charging cable to a power source, e.g. your
computer.
When charging, the LED charging indicator will blink.
When the charging indicator stops blinking, the battery is
90% charged.
It is advised that you continue to charge the battery for a full
3.5 hours to ensure the battery is 100% charged.
3. How to recharge the battery
It is advised that you use the screw driver provided when
opening the USB cap so as not to damage the head of the
screw.
PM / Charging indicator
This watch uses a PL301517 USB rechargeable battery.
The battery is estimated to last at least one month on a single
charge if no animation mode is selected.
Battery lifetime will vary depending on use, but is estimated at
approximately 300 charges.
To maximize battery life you should limit use of the animations.
4. Items included in the box
• Watch
• USB cable
• Spare USB cap
• Screw Driver
• Instruction Manual
5. Battery
•
•
•
•
6. Caution
•This watch is water resistant to 3ATM.
3ATM means suitable for everyday use to resist splashes
of water & rain. 3ATM does not cover swimming, diving
or other water related activities.
• This watch is covered by a 1 year warranty. This warranty
does not cover water damage, accidental damage, neglect or
unauthorized repair.
7. Warranty
Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Strap Materials
Finish
Weight
Battery
Water Resistance
Stainless Steel
Stainless Steel
30mm x 44mm x 11mm
210mm (approx.)
LED Digital Tube
Brushed
132g
PL301517
3ATM
SPECIFICATIONS
Tabla de contenidos
Otros manuales de Mirar de Kisai
Kisai
Kisai Xtal Manual de usuario
Kisai
Kisai Stencil Manual de usuario
Kisai
Kisai RPM Manual de usuario
Kisai
Kisai Zone Manual de usuario
Kisai
Kisai ADJUST Manual de usuario
Kisai
Kisai OPTICAL ILLUSION Manual de usuario
Kisai
Kisai Katana Manual de usuario
Kisai
Kisai ONLINE Manual de usuario
Kisai
Kisai Seven Manual de usuario
Kisai
Kisai Quasar Manual de usuario
