Kisai 3D Unlimited Manual de usuario
Change the way you think about time
INSTRUCTION MANUAL
Button A
Button B
• This watch uses an LCD “always on” display to show the
time.
• You can illuminate the display for a short time with the EL
backlight by pressing button A.
• The time is displayed digitally on three sides of the cube as
shown in the diagrams below.
Hours
10 Minutes
1. How to read the time
Example 12:54
Single Minutes
• Press button B to display the date.
• The date icon indicates that you are in date mode.
• You can illuminate the display for a short time with the EL
backlight by pressing button A.
• The date is displayed on three sides of the cube as shown
in the diagrams below.
• The display will change back to time mode after a short time.
Month Single Days
Date icon
2. How to read the date
10 Days
Example May 26th
• Press and hold button B for 3 seconds to enter setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
• The year digits will flash when you are in year setting
mode.
• Press button A to increase the year as required.
• Hold button A to increase the years more quickly.
• Press button B to confirm and move to the month.
• The month digits will flash when you are in month
setting mode.
• Press button A to increase the month as required.
• Hold button A to increase the months more quickly.
• Press button B to confirm and move to the date.
• The date digits will flash when you are in date setting
mode.
• Press button A to increase the date as required.
• Hold button A to increase the date more quickly.
• Press button B to confirm and move to the hour.
3. How to set the date and time
I. Setting the year
II. Setting the month
III. Setting the date
Date icon
• The hour digits will flash when you are in hour
setting mode.
• The PM icon in setting mode indicates that you are
setting the time in PM.
• Press button A to increase the hour as required.
• Hold button A to increase the hours more quickly.
• Press button B to confirm and move to the minutes.
• The minute digits will flash when you are in minute
setting mode.
• Press button A to increase the minutes as required.
• Hold button A to increase the minutes more quickly.
• Press button B to confirm and exit setting mode.
IV. Setting the hour
Example
June 24th 8:41PM
PM icon (only for setting)
V. Setting the minutes
• This watch is covered by a 1 year manufacturers’ warranty.
This warranty does not cover water damage, accidental
damage, neglect or unauthorized repair.
II. Warranty
• This watch uses an CR2016 replaceable watch battery.
• Battery lifetime will vary depending on use, but is
estimated to last for at least one year.
• To maximize battery life you should limit use of the EL
backlight.
• This watch is water resistant to 3ATM. Please do not use
the watch in the shower, for swimming or for other water
related activities.
4. User information
I. Battery
III. Caution
Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Water Resistance
Strap Materials
Finish
Weight
Battery
Stainless Steel
38 x 42 x 8.3 mm
210mm (approx.)
Colored LCD with EL Backlight
3 ATM
Stainless Steel
Polished
120g
CR 2016
SPECIFICATIONS
Button A
Button B
取り扱い説明書
• この商品はLCDディスプレイに常時に時刻が表示されます。
• Aボタンを押すと数秒間ELバックライトを点灯させることが
できます。
•時刻は下図のように、立方体の3面に沿うようデジタル数字
で表示されます。
1. 時刻の読み方
時 1分単位
10分単位
時刻表示例 12:54
Tabla de contenidos
Otros manuales de Mirar de Kisai
Kisai
Kisai Satellite-X Manual de usuario
Kisai
Kisai MAZE Manual de usuario
Kisai
Kisai Quasar Manual de usuario
Kisai
Kisai OPTICAL ILLUSION Manual de usuario
Kisai
Kisai RPM Manual de usuario
Kisai
Kisai ONLINE Manual de usuario
Kisai
Kisai ADJUST Manual de usuario
Kisai
Kisai Stencil Manual de usuario
Kisai
Kisai Xtal Manual de usuario
Kisai
Kisai Blade Manual de usuario
