kinetic GymAware Manual de usuario
Quick Start Guide
Welcome
Congratulations on your purchase of a GymAware PowerTool
You have now joined the community of GymAware users who are all benetting from using the best power
monitoring equipment available.
At Kinetic we value your feedback on our products and hope that you will contact us with any questions or
comments you may have.
This quick start guide is designed to get you up and running.
For further help check out our website at http://kinetic.helpdocsonline.com
What’s in the Box?
The GymAware Kit 1
CHARGER
TETHER
SLOT
MINI USB
CONNECTOR
INDICATOR
LEDs
VELCRO
STRAP
TETHER
POWERTOOL
What’s in the Box?
The PowerTool 1
VELCRO
STRAP
TETHER
MINI USB
CHARGE
PORT
RESET HOLE
Each GymAware kit contains:
• PowerTool device
• Wall charger with mini USB charger cable
• Hard carry case
• Quick start guide
Optional extras available from the online shop:
• Ceiling mount bracket
• Magnetic cradle for iPhone/iPod Touch
• iPad stand
• Replacement Velcro straps
Initial Setup
Manual Pairing - Bluetooth Pairing
2
Follow these steps for Bluetooth pairing of the PowerTool and an iOS device for iOS devices which have not
been previously paired.
Turn ON the iOS device
Open the Settings App Select Bluetooth
Flight mode must be turned off.
Download the GymAware App from the iTunes store
Log on to the iTunes store and download the appropriate free GymAware App. Note: For the latest GymAware
features make sure your iOS device is running the latest software.
Make sure Bluetooth is ON.
In this setting, wake up the
PowerTool by pulling the tether.
When the PowerTool beeps,
stop pulling the tether.
The LED will change from
orange to green and will start
ashing.
This indicates that the
PowerTool is ready for
pairing.
The PowerTool name should
now appear on the iOS’
Bluetooth device list (this will
match the serial number on
the bottom of the PowerTool)
Make a connection by
selecting the PowerTool name.
As this is the rst connection
between the PowerTool and
iOS device, the iOS device
will prompt you (as above):
press Pair.
Initial Setup - Manual Pairing
2
When successfully paired the PowerTool will
beep twice and the green LED will change to
a continuous orange LED.
NOTE: You must select Pair while the green LED is still ashing or the connection will time out.
Read “Section 6: Trouble Shooting Pairing Unsuccessful”
Select the GymAware App -
either Lite or Online/Pro
You are now ready to GO!
Press the iOS Home button to
return to the main screen.
Initial Setup - Manual Pairing
2
Previously Paired Device
Previously Paired PowerTool and iOS Device 3
Reconnecting your iOS device to GymAware PowerTool
Skip to Section 4 if you have just Manually Paired your device
NOTE: Flight mode must be turned “OFF”
Turn on your iOS device and
go to the Home Screen
Make sure Bluetooth is ON
Select the Settings App
If the PowerTool does not nd the iOS device it
previously paired to, it will continue to search for as long
as you continue to pull the tether.
If you stop pulling the tether the PowerTool will revert
back to accepting new connections, indicated by green
ashing LED.
You will need to follow Step 2 - Manual Pairing.
Continually pull the tether on your PowerTool.
When the PowerTool nds your iOS device the PowerTool will
beep twice to indicate successful connection. The LED will
stop ashing and turn orange.
You can now stop pulling the tether as the GymAware App
will automatically open.
You are now ready to GO!
Previously Paired Device 3
Zero the PowerTool Angle
Once the PowerTool is connected the angle sensor needs to be zeroed. 4
Do this before connecting your PowerTool to the weight stack/bar.
Select Test Subjects (This is
the GymAware Lite App)
Make sure the PowerTool tether is
not attached and fully retracted into
sensor.
Select the GymAware App -
either Lite or Online/Pro
Otros manuales para GymAware
2
Tabla de contenidos
Otros manuales de Fitness electrónico de kinetic
