Key Digital Phantom KD-HDSW2x1Pro Manual de usuario

Key Digital®Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553

Phone : 914.667.9700 Fax : 914.668.8666 Web : www.keydigital.com

Key Digital®, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high quality video imaging is important. Key Digital®

is at the forefront of the video industry for Home Theater

Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers.

Rev 0 – March 2013

HDMI Switchers with Audio De-Embedder,

Coaxial Audio, Optical Digital Audio & Analog L/R

Phantom Series™

Operating Instructions

The Experts in Digital Video Technology and Solutions™

KD-HDSW2x1Pro KD-HDSW3x1Pro

KD-HDSW4x1Pro

Always follow the instructions provided in this Operating Manual.

Table of Contents

Introduction ................................................................ 1

Quick Setup Guide .......................................................... 2

Installation and Operation ..................................................... 3

DVI Applications for KD-HDSW Pro Series......................................... 3

IR Remote Control........................................................... 4

Serial IR & IR Emitter Control ................................................... 4

EDID Control Settings ........................................................ 5

External Audio Outputs ....................................................... 6

RS-232 Commands and Protocol ............................................... 6

Using iAS Intelligent Auto Sense

™

............................................... 7

Speciﬁcations .............................................................. 7

Important Product Warnings & Safety Instructions: .................................. 8

How to Contact Key Digital

................................................... 9

Warranty Information ......................................................... 9

Introduction

Key Digital®Phantom Series™HDMI/DVI switchers are designed and engineered to offer

the best in quality, performance, and reliability while providing a cost effective HDMI/DVI

switching solution. Phantom Series™HDMI switchers are a transparent solution for all digital

video/audio switching applications and support all HD and SD video standards, including

1080p/60. In addition, the KD-HDSW line has complete support for the latest 3D technology.

KD-HDSWPro switchers feature iAS™Intelligent Auto Sense signal detection and switching,

pushbutton control, IR, RS-232, status-monitoring LEDs, and support for HDMI CEC.

The Phantom Series™switchers support multiple unit expandability, and are individually

addressable.

About the KD-HDSW2x1Pro; KD-HDSW3x1Pro; KD-HDSW4x1Pro

›Digital switching of multiple (2, 3, or 4) HDMI inputs to one (1) HDMI output

›Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to

1080p (60Hz & 50Hz)

» SD & HD: 480i, 480p, 720p, 1080i, 1080p

» VESA: From 640x480p up to 1920x1200p

›EDID Control featuring 12 internal library settings or auto EDID detection from display

›EDID and HDCP Transparency between sources and display

›Can de-embed audio from the HDMI input and send it to external digital or analog audio outputs

›Supports signal rates up to 10.2 Gb per second

›Supports HDMI and DVI-D

›Supports CEC

›Compliant with all HDMI

versions and HDCP copyright protection

›Input and Output status indicated by LED lights

›Firmware upgradable

›Rack mountable

Advanced HDMI®Features

›3D – Capability to pass 3D stereoscopic signal formats

Accessories

›External power supply: 5V 2A

›HDMI Lacing Clips

›Rack Ears

›Operating Instructions

›Warranty Card

Quick Setup Guide

›Step 1: Find a safe and convenient location to mount or place your KD-HDSW unit

›Step 2: Begin with the KD-HDSW unit and all input/output devices turned off with power cables

removed

›Step 3: Connect your HDMI or DVI-D source devices to the input ports of your KD-HDSW unit

›Step 4: Connect your HDMI or DVI-D display to the output port of your KD-HDSW unit

›Step 5: Connect the desired IR or RS-232 control inputs to your KD-HDSW unit

›Step 6: Be sure the Operation Mode Switch is set to the “Normal” position

›Step 7: Connect power to the KD-HDSW unit

›Step 8: Power on input/output devices

Audio

Speakers

Sub-Woofer

Audio Rcvr.

DVI

DVI Video*

HDMI/DVI

HDMI/DVI*

Plasma TV

HDMI/DVI*

Blu-Ray

HDMI/DVI*

DVD Player

HDMI/DVI*

Cable Box

HDMI/DVI*

Satellite Box

Plasma TV

HDMI/DVI*

Blu-Ray

DVD Player

Cable Box

Satellite Box

Desktop PC

Laptop

Desktop PC

Audio

Speakers Speakers

Sub-Woofer

Audio Rcvr.

Plasma TV

Audio

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

*To connect DVI, use HDMI to DVI adapters

Note: No signal conversion is done on the KD-HDSW2x1Pro; KD-HDSW3x1Pro; KD-HDSW4x1Pro.

If input signal is HDMI output signal will be HDMI. If input signal is DVI output signal will be DVI.

Installation and Operation

Before permanently securing the unit for ﬁnal installation of cabling behind walls or ceilings, test for

proper operation of the unit and the cables in your system.

It is recommended that you leave enough ventilation space to provide sufﬁcient airﬂow and

cooling, especially if leaving the unit powered at all times.

An optional HDMI cable clip (included) allows for a secure HDMI cable connection to be made to

the rear of the unit and helps defeat intermittent or complete signal loss due to poor connection.

Active Input / Output LED Indicators

Your KD-HDSW unit may be controlled via the pushbutton on the front of the unit. Select your

desired input by depressing the “Input Select” button. The front LED indicators (1, 2, 3, 4)

correspond to the selected input.

DVI Applications for KD-HDSW Pro Series

KD-HDSW Pro Distribution Ampliﬁers can also be used with DVI-D sources and displays. For

these applications, use DVI to HDMI adapters. Note that while HDMI supports both video and

audio over an HDMI cable, DVI-D supports only video.

Audio

Speakers

Sub-Woofer

Audio Rcvr.

DVI

DVI Video*

HDMI/DVI

HDMI/DVI*

Plasma TV

HDMI/DVI*

Blu-Ray

HDMI/DVI*

DVD Player

HDMI/DVI*

Cable Box

HDMI/DVI*

Satellite Box

Plasma TV

HDMI/DVI*

Blu-Ray

DVD Player

Cable Box

Satellite Box

Desktop PC

Laptop

Desktop PC

Audio

Speakers Speakers

Sub-Woofer

Audio Rcvr.

Plasma TV

Audio

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

KD-HDSW4x1Pro

EDID Control

RS-232

Serial IR

Optical IR

*To connect DVI, use HDMI to DVI adapters

IR Remote Control

The KD-HDSW can also be operated using the IR remote control provided with your unit.

The KD-HDSW switcher features IR sensors on the front and rear of the unit for reception of

the IR signals.

1 2 3 4

1 2 3 R1

4 5

7 8

6R2

9R3

Device Select

Auto

Power OffPower On

www.keydigital.com

Input

Power On Power Off

Auto Input Select

Input Select

Scroll Down

Input Select

Scroll Up

R1, R2, R3

Reserved for future use

Numeric Keypad

Used in addressable

mode for specifying

unit’s address

Serial IR & IR Emitter Control

›The “Serial IR” port requires the use of a Male 3.5mm Mono cable (not included) with the IR

command signal being carried on the “Tip” of the input inserted into the KD-HDSW unit. The

location of the IR signal may vary by control system used. Please verify the location of the IR

signal with your control system.

Ground

Signal

›When using the IR Emitter / IR Extender (sold separately), the

IR Emitter must be mounted over the IR Sensor on the KD-

HDSW unit. It is recommended that the rear IR sensor of the

KD-HDSW unit be utilized for these applications. One end of

the cable is connected to the IR Receiver / Master Controller

/ IR Extender / IR Connecting Block, while the other end is

mounted over the IR Sensor of the KD-HDSW unit.

EDID Control Settings

At times, your HDMI sources and display may not synchronize properly.

This is when EDID* control should be utilized. KD-HDSW Pro

Switchers feature an internal library of EDID settings to ensure your

HDMI source’s output is compatible with the display devices.

Please reset the unit by either unplugging and plugging the HDMI

connections, or via a power cycle for the new settings to take effect.

Rotary EDID Settings (Default EDID: 0):

KD-HDSW2x1Pro

EDID Settings

0Copy EDID from

HDMI Output

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, HD Audio

41080p, 2ch Audio

51080p, Dolby/DTS 5.1

61080p, HD Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

D1080p, 2Ch Audio

E1080p, 2Ch Audio

F1080p, 2Ch Audio

KD-HDSW3x1Pro

EDID Settings

0Copy EDID from

HDMI Output

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, HD Audio

41080p, 2ch Audio

51080p, Dolby/DTS 5.1

61080p, HD Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

D1080p, 2Ch Audio

E1080p, 2Ch Audio

F1080p, 2Ch Audio

KD-HDSW4x1Pro

EDID Settings

0Copy EDID from

HDMI Output

11080i, 2Ch Audio

21080i, Dolby/DTS 5.1

31080i, HD Audio

41080p, 2ch Audio

51080p, Dolby/DTS 5.1

61080p, HD Audio

73D, 2ch Audio

83D, Dolby/DTS 5.1

93D, HD Audio

A1280x1024 DVI

B1920x1080 DVI

C1920x1200 DVI

D1080p, 2Ch Audio

E1080p, 2Ch Audio

F1080p, 2Ch Audio

Example of EDID Auto Select:

If one of your system’s displays supports 1080p and the second display only supports up to

1080i (does not support 1080p), then the highest common EDID format supported is 1080i. By

choosing the Auto Select EDID Setting, your KD-HDSW Pro unit will inform your source device to

output 1080i in order to ensure all displays receive a supported signal.

Rotary EDID Control Switch

*EDID (Extended display identiﬁcation data) is a data structure provided

by a display to describe its capabilities to a source device.

External Audio Outputs

Analog audio output via 3.5mm stereo phone jack

›2 channel analog audio output from the selected HDMI

input source

›Converts only 2 ch. PCM audio from the HDMI input to

2 channel analog audio output

›Only supports 2 ch. PCM audio, not multi-channel PCM,

Dolby, DTS, HD audio

Digital audio output via Coax/RCA

›Digital audio output from the selected HDMI input source

›Uses SPDIF format

›Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio

Digital audio output via Optical

›Digital optical audio output from the HDMI input

›Uses SPDIF format

›Supports 2 ch. PCM, Dolby, DTS; does not support multi-channel PCM or HD audio

RS-232 Commands and Protocol

›KD-HDSW Pro units are compatible with all Control Systems, such as Compass Control

, AMX

Control4

, Crestron

, RTI

, Universal

›Connect your Control System’s Master Controller to the KD-HDSW Pro unit using the RS-232

port. Follow all instructions provided with your control system.

›RS-232 Protocol:

» Baud Rate = 57600 bits per second

» Data Bits = 8 / Stop Bits = 1

» Parity = None

» Flow Control = None

RS-232 Command Description

Azz All Commands may have Preﬁx System Address zz=[01-99]

H Help

PF Power Off

PN Power ON

STA Show Global System Status

Video Output Setup Commands: yy = [01-04] (A=All)

SPO SIyy Set Output to Video Input yy

SPO ON/OFF Set Output ON/OFF

Audio Output Setup Commands: [E=Enable, D=Disable]

SPO AA E/D Enable/Disable External Analog Audio Output

SPO DA E/D Enable/Disable External Digital Audio Output

›All RS-232 commands must be in

lower case letters

›Command must be terminated with

a carriage return

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Key Digital

Key Digital

Key Digital KD-S2x1X-2 Manual de usuario

Key Digital

Key Digital KD-SX440WP Manual de usuario

Key Digital

Key Digital KD-SW4x1 Manual de usuario

Key Digital

Key Digital KD-HDMI2X1 Manual de usuario

Key Digital

Key Digital KD-HDMI2X1 Manual de usuario

Key Digital

Key Digital Champion KD-2X1 Manual de usuario

Key Digital

Key Digital KD-2x1CSK Manual de usuario

Key Digital

Key Digital KD-CSW4X1 Manual de usuario

Key Digital

Key Digital X4x1WUTx Manual de usuario

Key Digital

Key Digital KD-HDMI2X8P Manual de usuario

Key Digital

Key Digital KD-X4x1WUTx Manual de usuario

Key Digital

Key Digital KD-HDMI4X1 Manual de usuario

Key Digital

Key Digital KD-XWPS Manual de usuario

Key Digital

Key Digital Champion KD-2X1 Manual de usuario

Key Digital

Key Digital KD-S2x1 Manual de usuario

Key Digital

Key Digital KD-CSW4X1 Manual de usuario

Key Digital

Key Digital KD-IP1022ENC Manual de usuario

Key Digital

Key Digital KD-CSW2X1 Manual de usuario

Key Digital

Key Digital KD-UPS52U Manual de usuario

Key Digital

Key Digital KD-PS42 Manual de usuario

Key Digital

Key Digital Pro Series Manual de usuario

Key Digital

Key Digital KD-Pro4x1X Manual de usuario

Key Digital

Key Digital KD-HDMI2X1 Manual de usuario

Key Digital

Key Digital KD-VPHD4X1 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario