04. Wiring diagram for KT electronics with the cable colors of the Harley-Davidson models.
Yellow cable – RPM signal, green cable – speed signal
MODEL YEAR PIN/
YELLOW CABLE
PIN/
GREEN CABLE INFORMATION IGNITION PLUS
EVO Softail 1984-1995 dark green / white external speed sensor orange / white
EVO Softail 1996-1999 pink white
TC88 Softail 1999-2003 29 blue / orange white carburetor orange / white
TC88 Softail 2003-2007 29 blue / orange 33 white / green only injector orange / white
TC96 Softail 2007-2010 29 blue / orange 33 white / green orange / white
TC96 Softail 2011 29 green / blue 33 light green/yellow orange / white
TC103 Softail 2012- 2 green / blue 4 light green/yellow black connector orange / white
TC110 Softail 2007-2010 29 blue / orange 33 white / green orange / white
TC110 Softail 2011 29 green / blue 33 light green/yellow orange / white
TC110 Softail 2012- 2 green / blue 4 light green/yellow black connector orange / white
05. Safety Note:
After about 200 kms retighten all exhaust screws and after every service intervals as well as
every 4,000 kms. If not correctly performed, the KessTech warranty will be void. If there is any
subsequent change of the exhaust, the vehicle type-approval will be invalid.
06. Modelspecicfeatures:
A. Footrest for complete line Breakout.
Screw screws 3/8 UNCx1“ in the OEM hole (picture taken with snap ring and washer) about
5mm from behind. Insert the footrest transfer plate and securely tighten the screw. Mount
footrest with 3/8“x2,5’’ screws onto the footrest transfer plate and counter from behind with
3/8’’ UNC nuts (included in scope of supply).
HD SOFTAIL SLIPONS ESM2 ESM3 06a
