KERN TMBA-A01-A Manual de usuario

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Phone: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Operating manual

Mechanical height measuring rod

KERN

TMBA-A01-A

Version 1.2

2020-10

MBA-A01

MBA-A01-BA-e-2012

2 MBA-A01-BA-e-2012

KERN MBA-A01

Version 1.22020-10

Operating manual

Mechanical height measuring rod

Table of contents

1Technical data................................................................................................ 2

2Declaration of conformity ............................................................................. 3

3Appliance overview ....................................................................................... 4

4Explanation of the graphic symbols ............................................................ 5

5Basic Information (General).......................................................................... 6

6Basic Safety Precautions.............................................................................. 7

7Unpacking/installing...................................................................................... 8

8Body height measurement.......................................................................... 10

9Cleaning, Maintenance, Disposal............................................................... 12

1 Technical data

KERN (type) TMBA-A01-A

Model MBA-A01

Measuring range 30 – 80 cm

Readability 1 mm

Tolerance 5 mm

Dimensions (D x H x W) mm 850 x 240 x 60 mm

Temperature range +10°C … +40°C

Net weight approx. 360 g

Admitted as medical product as per

Guideline 93/42/EWG (CE 0297) Category I with measuring

function

The height meter is only suitable for use with baby weighing

scale KERN MBA-M.

MBA-A01-BA-e-2012 3

2 Declaration of conformity

The current EC/EU Conformity declaration can be found online in:

www.kern-sohn.com/ce

4 MBA-A01-BA-e-2012

3 Appliance overview

1. Measuring rod

2. Head stop

3. Caliper gauge/Heel stop

MBA-A01-BA-e-2012 5

4 Explanation of the graphic symbols

SN WD 20xxx Designation of the serial number of every device,

applied at the device and on the packaging.

Number here as example

2020-10

Identification of the manufacturing date of the medical

product.

Year and month here as example

„Attention observe accompanying document“, or

„Follow operating instructions“

Kern & Sohn GmbH

D – 72336 Balingen

Ziegelei 1

Manufacturer’s marking of

medical product including address

10°C / 40°C

Temperature limitation in the application

indicating the lower and the upper limit

(Allowable ambient temperature)

Temperature indication as example

6 MBA-A01-BA-e-2012

5 Basic Information (General)

This height measuring rod according to guideline 93/42/EWG is

provided for determination the body height in medical practice

and for medical survey, examination and treatment.

Defined

purpose Indication:

•Determining the body height in the medical practice area.

•For a baby resting on his/her back, attach the measuring rod in

such a way on head and feet that you can read the body

height on the scale.

Contraindication:

No contraindication known.

Proper use This height measuring rod is designed for measuring the height of

a baby resting on his/her back, in medical treatment rooms. This

height measuring rod is suitable to detect, prevent and survey

diseases.

Ensure that the height measuring rod may only come into contact

only with uninjured skin.

Improper Use The structure of the height measuring rod may not be modified.

This may result in incorrect measuring results, safety-related

defects as well as destruction.

The height measuring rod may only be used according to the

described conditions. Other areas of use must be released by

KERN in writing.

Warranty Warranty claims shall be voided in case

•Our conditions in the operation manual are ignored

•The appliance is used outside the described uses

•The appliance is modified or opened

•Mechanical damage or damage by media, liquids, natural wear

and tear.

•Non correct implantation or assembly.

Test device

control For height measuring rods, we recommend a metrological

examination of the accuracy of the measuring rod, however,

this is not mandatory as the determination of human body

height involves rather large, intrinsic inaccuracies.

MBA-A01-BA-e-2012 7

6 Basic Safety Precautions

Carefully read this operation manual before setup

and commissioning, even if you are already

familiar with KERN balances.

Staff training The medical staff must apply and follow the operating

instructions for proper use and care of the product.

Avoiding

contamination In order to avoid crossed contamination (fungal disease,…) the

parts coming into contact with the patient must be cleared

regularly.

Recommendation:

After every application which could have a potential

contamination as consequence (e.g. direct contact with the

skin).

Safety

Instructions

•Observe operating instructions.

•Please use no other than the supplied fixtures for mounting.

•Ensure during installation that the height measuring rod has

been assembled correctly.

•When shifting the measuring rod, ensure that the baby does not

come to any harm.

•Reliable values of body height measurements are only

achieved if the heel, back and head are aligned in a straight

line.

•Do not attach the height measuring rod to any other but the

baby weighing scale KERN MBA-M.

•During installation make sure that the screws are fitted firmly.

•Do not leave a baby unattended.

•When shifting the measuring rod make sure that neither the

hands nor the feet of the baby are resting on the measuring rod.

•Clean and disinfect the measuring rod at regular intervals.

•To achieve correct height measuring, we recommend that you

involve a second person.

8 MBA-A01-BA-e-2012

7 Unpacking/installing

Testing upon

acceptance Please check packaging as well as the height meter on receipt

for possibly visible external damages.

Packaging/

Return Keep all parts of the original packaging for a possibly required

return. Only use original packaging for returning.

Scope of

delivery •Height measuring rod

•1 Fixing screw

•Operation manual

MBA-A01-BA-e-2012 9

Installing:

Place the length meter on the edge of the housing.

The length meter should be clipped on the 2 pins (1) on the left and right side.

Fix it with the delivered screw on the center hole (2).

To acces the screw hole on the length meter, it must be fully extended.

10 MBA-A01-BA-e-2012

8 Body height measurement

Fixed stop

min. 30 cm

Movable stop

max. 80 cm

Otros manuales para TMBA-A01-A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de KERN

KERN

KERN ORA 90 BE Manual de usuario

KERN

KERN MRS120-3 Manual de usuario

KERN

KERN ORD 45BM Manual de usuario

KERN

KERN DLB 160-3A Manual de usuario

KERN

KERN DLB 160-3A Manual de usuario

KERN

KERN MAP 80K1 Manual de usuario

KERN

KERN DBS Manual de usuario

KERN

KERN DLB A01N Manual de usuario

KERN

KERN ORA 10 BA Manual de usuario

KERN

KERN MBA-A01 Manual de usuario

KERN

KERN MLS 50-3IR160 Manual de usuario

KERN

KERN MLB-A03 Manual de usuario

KERN

KERN ORA 3 HA Manual de usuario

KERN

KERN KFE-TM Manual de usuario

KERN

KERN ABP Manual de usuario

KERN

KERN YDB-02 Manual de usuario

KERN

KERN KIB-A12 Manual de usuario

KERN

KERN MLS 50-3...N series Manual de usuario

KERN

KERN KFE-TM Manual de usuario

KERN

KERN MSF 200N Manual de usuario

KERN

KERN ORA 62 BA Manual de usuario

KERN

KERN ORA 10 BB Manual de usuario

KERN

KERN mlb-c Manual de usuario

KERN

KERN ORA 20 BA Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario