Kargo Master 4A823 Manual
Kargo Master
Rancho Cordova, CA 95742
800-343-7486
CustomerService@KargoMaster.com
20201215R1 DATE: ________________
Instruction Guide
4A823
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING,
AND USING THIS PRODUCT.*
Warning
ALWAYS SECURE ALL PAYLOADS AND LADDERS PRIOR TO TRANSPORT OR MOVING
VEHICLE.
Tools Needed
1/2” Socket and Wrench
1/2” Box Wrench
Table of Contents
Parts .................................................................................................................................................................. 2
Hardware .......................................................................................................................................................... 3
Step 1 –Attach Load Plates .............................................................................................................................. 4
Step 2 –Assemble Foot Assemblies.................................................................................................................. 5
Step 3 –Attach Mounting Brackets .................................................................................................................. 6
Step 4 –Attach End Stops................................................................................................................................. 7
Step 5 –Install Rack to Vehicle ......................................................................................................................... 8
Step 6 –Adjust Load Stop to Fit Ladder............................................................................................................ 9
Before You Begin
Read all instructions prior to assembling or installing any Kargo Master product.
Always locate your installation locations prior to performing any work.
ENSURE SAFETY WHILE INSTALLING ONTO VEHICLE.
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2
Parts
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3
Hardware
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 4
DO NOT EXCEED MANUFACTURERS WEIGHT CAPACITY FOR ROOF.
Step 1 –Attach Load Plates
Using a 5/16”-18 x 1” hex head bolt, 5/16”lock
washer, and 5/16” flat washer, loosely bolt a
slider plate to a load plate. The press nut on the
slider plate face up. DO NOT TIGHTEN.
Repeat for a remaining load plates.
Slide an assembled load plate onto the middle of the crossbar with the load plate angled flanges facing
outward. The slider plate should fit into the extrusion so the slider plate
cannot rotate out of the extrusion.
Slide second load plate onto the middle of the crossbar with the load plate
angled flanges facing inward.
Snugly tighten but allow movement.
Repeat for second crossbar and third and fourth load plates.
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Step 2 –Assemble Foot Assemblies
Insert gutter clamp through the gutter foot rectangular slots as shown.
LOOSELY bolt the gutter clamp to the gutter foot using a 5/16” x 1-1/4” carriage bolt, 5/16” flat washer,
and 5/16” lock nut. DO NOT tighten.
Repeat for remaining gutter clamps and gutter feet.
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6
Step 3 –Attach Mounting Brackets
Using a 5/16”-18 x 1” hex head bolt, 5/16” lock washer, and 5/16” flat washer, loosely bolt a mounting
plate to a foot assembly. The press nuts on the mounting plate face up. DO NOT TIGHTEN.
Repeat for remaining mounting plates and foot assemblies.
Slide an assembled foot assembly onto a crossbar
with the slanted face facing outward.
Loosely tighten allowing for movement.
Repeat for opposite side of cross bar.
Repeat for second crossbar and remaining foot
assemblies.
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 7
Step 4 –Attach End Stops
Using a 5/16”-18 x 1” hex head bolt, 5/16” lock
washer, and 5/16” flat washer, loosely bolt a
slider plate to an end stop. The press nuts on
the slider plate face up. DO NOT TIGHTEN.
Repeat for remaining end stops.
Slide an assembled end stop onto a crossbar with the angled flanges facing outward until slider plate
aligns with end of crossbar. Be sure to insert slider plate so it cannot rotate.
TIGHTEN hardware securing end stop to end of crossbar.
Repeat for opposite side of cross bar.
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 8
Step 5 –Install Rack to Vehicle
Set crossbar assembly on vehicle. Be sure feet are inside rain channel on roof and clips are outside
vehicles roof rain gutter.
Center feet and rack to vehicle.
While squeezing the clip and foot to each
side of vehicles roof rain gutter, tighten
5/16” lock nut until foot is securely
fastened to vehicle.
Tighten hardware connecting foot to
crossbar.
Repeat for opposite side of vehicle.
Repeat for second crossbar assembly.
SQUEEZE
TIGHTEN
SQUEEZE
CENTER RACK AND FEET TO VEHICLE
Instructions –4A823
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 9
Step 6 –Adjust Load Stop to Fit Ladder
Place ladder to be used in position, on rack,
firmly against end stop.
Slide load stop to fit ladder. Be sure to allow
gap enough for ladder to be removed easily.
Repeat for second crossbar and opposite
side as desired.
GO BACK AND TIGHTEN ALL HARDWARE.
INSTALLATION AND ASSEMBLY ARE COMPLETE.
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Kargo Master
Kargo Master
Kargo Master 4A93L Manual de usuario
Kargo Master
Kargo Master 8006A Manual
Kargo Master
Kargo Master 4081S Manual de usuario
Kargo Master
Kargo Master 40040 Manual
Kargo Master
Kargo Master 40490 Manual
Kargo Master
Kargo Master 40201 Manual de usuario
Kargo Master
Kargo Master 40933 Manual
Kargo Master
Kargo Master 409CD Manual de usuario
Kargo Master
Kargo Master 4A84L Manual
Kargo Master
Kargo Master PRO-III Manual de usuario
Kargo Master
Kargo Master 4A98L-Rev 1 Manual de usuario
Kargo Master
Kargo Master 4A82L Manual
Kargo Master
Kargo Master 40816 Manual
Kargo Master
Kargo Master 4089P Manual
Kargo Master
Kargo Master 40020 Manual de usuario
Kargo Master
Kargo Master 4090L Manual
Kargo Master
Kargo Master 4095L Manual de usuario
Kargo Master
Kargo Master 40474 Manual de usuario
Kargo Master
Kargo Master 4A85L Manual
Kargo Master
Kargo Master 4082L Manual
