Kärcher HD 5 12 Manual de usuario
New Unit Information
New Unit Information 02.2004
HD 5/12
1.514-101
5.905-972
New Unit Information 02.2004
Technicalfeatures HD 5/12
Page 2 / 12
Drive unit
– 2-pole, air-cooled electric motor.
Pump:
– 3-piston axial pump.
– Pistons made from stainless steel, Ø 12mm
(0.472 in), stroke 9.3mm (0.366 in).
– Cylinder head made from brass.
– Swash plate with thrust ball bearing.
– Pressure and suction valve made from
stainless steel and plastic.
– The pressure switch switches off the motor
when the handgun is closed.
– Injector.
– Non-return valve.
– No safety valve.
– No pressure gauge.
– No pressure and flow control valve.
– Water inlet with strainer.
Electrics:
– Unit switch with thermal motor protection.
– Pressure switch.
Cleaning agent:
– Without cleaning agent tank.
– Metering valve on the unit.
– Cleaning agent operation at low pressure.
Accessories:
– Standard gun.
– Curved spray lance.
– Triple nozzle.
New Unit Information 02.2004
HD 5/12 Unit functions
Page 3 / 12
View from the front
1 High-pressure hose
2 Handgun
3 Mains connecting plug
4 Spray lance
5 Wheel
6 Triple nozzle.
7 High-pressure connection
8 Water connection with strainer
9 Inspection window for oil level
10 Front cover
11 Unit switch
12 Retaining screw for front cover
13 Handle,heightadjustable
4
3
5
6
13
9
8
7
1
11
12
10
2
New Unit Information 02.2004
Unit functions HD 5/12
Page 4 / 12
Rear view
1 Handle,heightadjustable
2 Rear cover
3 Cleaning agent supply hose with filter
4 Wheel
5 Mains connection cable
6 Wheel
7 Cleaning agent metering valve
8 Clamping screw for adjusting handle
height
9 Handgun bracket
9
8
7
2
1
4
6
5
3
New Unit Information 02.2004
HD 5/12 Unit functions
Page 5 / 12
1 Electrical box
2 Unit switch
3 Cleaning agent hose
4 Mains connection cable
5 Cleaning agent connection with non-
return valve
6 High-pressure connection
View from the front, cover removed
7 Overflow valve
8 Pressure switch
9 Water connection with strainer
10 Cylinder head
11 Motor housing
12 Oil reservoir
1
2
3
4
5
6
9
10
11
12
7
8
New Unit Information 02.2004
Unit functions HD 5/12
Page 6 / 12
Electrical box
1 Unit switch
2 Cover
3 Capacitor
4 Connection cable with motor
Electrical box open
– Pull the retainer clips (arrows) outward and
remove the cover (2).
2
1
3
4
New Unit Information 02.2004
HD 5/12 Unit functions
Page 7 / 12
View from the rear, cover open
1 Rear cover
2 Bore markings
3 Screw holes
4 Clamping screw for adjusting handle
height
5 Mains connection cable
6 Cleaning agent supply hose
7 Cleaning agent metering valve
4
5
7
6
Rear cover open
– Pull the retainer clips (arrows) outward and
remove the cover (1).
22
1
33
Note:
If the retaining clips have broken repair as
follows:Drillthroughthetwoboremarkings
(2)inthecoverwithaØ5mmbit.Thecover
(1) can then be mounted with two screws
M5x20(7.303-108)inthescrewholes(3).
New Unit Information 02.2004
Unit functions HD 5/12
Page 8 / 12
View from below
61
2
1 High-pressure connection
2 Pressure switch
3 Cylinder head bolt
4 Suction cover
5 Cylinder head
6 Water connection with strainer
3
4
5
New Unit Information 02.2004
HD 5/12 Unit functions
Page 9 / 12
Motor
45789 11 12 13
15
16
17
1 Pressure switch
2 Pressure valve
3 Cleaning agent suction hose connection
4 High-pressure seal
5 Low-pressure seal
6 Oil seal
7 Piston
8 Swash plate with thrust ball bearing
9 Motor bearings
10 Shaft seal
123
610
18
19
20
11 Motor winding (stator)
12 Magnet (rotor)
13 Motor bearings
14 Fan wheel
15 Motor drive shaft
16 Motor housing
17 Piston housing
18 Water connection
19 Suction valve
20 Cylinder head
14
New Unit Information 02.2004
Unit functions HD 5/12
Page 10 / 12
1 Retainingplate
2 Pressure valve
3 Retainingplug
4 Non-return valve
5 Spring
6 Ball
7 Cleaning agent hose connection
8 Injector
9 High-pressure connection
10 Cylinder head
Cylinder head
11 Connection bore (pump pressure)
12 Connection bore (dynamic pressure)
13 Screw plug
14 Connection bore to pressure switch (only
indicated here)
15 Overflow valve
16 Valve seat
17 Water connection
18 Suction valves
19 Cylinder head screws
20 Piston
123 23 2 3
5
6
7
18
18
9
3
48
10
11
17
18
19
20 13
1516 14
12
Tabla de contenidos
Otros manuales de Hidrolavadora de Kärcher
Kärcher
Kärcher G 4000 OH Manual de usuario
Kärcher
Kärcher 1.575-554.0 Manual de usuario
Kärcher
Kärcher K 2.110 M Manual de usuario
Kärcher
Kärcher K 5.86 M Manual de usuario
Kärcher
Kärcher G 2500 DCE Manual de usuario
Kärcher
Kärcher Binford 1750 Manual de usuario
Kärcher
Kärcher K 5.86 M Manual de usuario
Kärcher
Kärcher K 1400 Manual de usuario
Kärcher
Kärcher HDS 13/20-4 S/SX Manual de usuario
Kärcher
Kärcher HD 6/15-4 Manual de usuario
Kärcher
Kärcher HD 2.8/10 Ed Manual de usuario
Kärcher
Kärcher HD 6/15-4 Manual de usuario
Kärcher
Kärcher K 2 BASIC Manual de usuario
Kärcher
Kärcher K 5.700 Manual de usuario
Kärcher
Kärcher G 2500 PH Manual de usuario
Kärcher
Kärcher T-Racer T 250 Plus Manual de usuario
Kärcher
Kärcher K 3.67 M Manual de usuario
Kärcher
Kärcher G 2600 VC Manual de usuario
Kärcher
Kärcher K2.01 Manual de usuario
Kärcher
Kärcher G 3000 BH Manual de usuario
