Kapro Prolaser 3D All-Lines Manual de usuario
Prolaser®3D All Lines Green
Model No. 8831G
Li-ion
165'/50m RECHARGEABLE
Up to 60 m/200'
User Manual
Manual del usuario
Manuel d'utilisation
Руководство по эксплуатации
2
Thank you for purchasing Kapro’s 8831G Prolaser 3D All Lines
Green. You now own one of the most advanced laser tools
available. This manual will show you how to get the most out
of your laser tool.
APPLICATIONS
The 8831G Prolaser 3D All Lines Green is a laser level with
3 green diodes, that emits 3 circular beams. The laser is
innovatively designed for a very broad range of professional
and DIY jobs, including:
• Hanging cabinets and shelves.
• Setting floor and wall tiles.
• Drywall installation and hanging acoustic ceilings.
• Framing and aligning windows and doors.
• Leveling electrical outlets, plumbing and studs.
• Accurately laying out right angles for ooring, fences, gates,
decks, pergolas and gazebos.
• Leveling slopes for stairs, rails, roofs and more (manual mode).
NOTE
Keep this user manual for future reference.
EN
Li-ion
165'/50m RECHARGEABLE
Up to 60 m/200'
3
CONTENTS
• Features 4
• Safety instructions 5-6
• Battery installation & safety 7-8
• Overview 9
• Operating instructions 10-12
• Maintenance 13
• Field calibration test 14-23
• Specifications 24
• Warranty 25
4
FEATURES
• This laser tool automatically determines the horizontal
and vertical planes.
• This laser emits 1 horizontal 360° and 2 orthogonal 360°
vertical green beams, that intersect on 4 walls, floor and
ceiling.
• ±3° self-leveling range in automatic mode.
• Visual and auditory warning when the laser level is out of
leveling range.
• Pulse mode for working with a detector.
• Max. indoor working range - 30 m (100’) with goggles.
• Max. detectable range of the laser in pulse mode is
60 m (200’).
• Manual mode allows angular layout/marking.
• IP65 rating for water and dust protection.
• 1/4" tripod thread.
• Shock resistant rubber over molded casing.
• Multi-purpose magnetic mount.
• Rechargeable Li-Ion battery and type-C USB charger.
NOTE
This device contains precision components
sensitive to external shock, impact or falls
that may compromise its functionality. Handle
with care to maintain its accuracy.
5
SAFETY INSTRUCTIONS
WARNING
This product emits radiation classified as Class II
according to EN 60825 -1
The laser radiation can cause serious eye injury
• Do not stare into the laser beam
• Do not position the laser beam so that it unintentionally
blinds you or others.
• Do not operate the laser level near children or let children
operate the laser level.
• Do not look into a laser beam using magnifying optical
devices such as binoculars or a telescope, since it will
increase the level of eye injury.
WARNING: This product contains lead in soldered joints
and certain Electrical parts contain chemicals which are
known to the State of California to cause cancer, birth
defects or other reproductive harm.
(California Health & Safety Code Section 25249.6- Proposition 65)
NOTE
The green goggles are intended to enhance
the visibility of the laser beam. They will not
protect your eyes against laser radiation.
6
• Do not remove or deface warning labels on the laser level.
• Do not disassemble the laser level. Laser radiation can
cause serious eye injury.
• Do not drop the laser.
• Do not use solvents to clean the laser.
• Do not use in temperatures below -10°C or above 40°C
(14°F / 104°F)
• Do not operate the laser in the presence of flammable
liquids or gases. Sparks from the tool can cause ignition.
• When not in use, turn off the power, engage the pendulum
lock and place the laser in the carrying pouch.
• Make sure the pendulum lock mechanism is engaged
before transporting the laser.
NOTE
If the pendulum lock mechanism is not
engaged before transportation, internal
mechanical damage can occur.
7
The 8831G Prolaser 3D All Lines Green is powered by a
rechargeable Li-Ion battery. 2 batteries packs are included in
the set. The laser can be powered by using only the included
charger.
Installation
1. Press down the latch of the battery cover.
2. Insert the Li-Ion battery pack.
3. Close the battery cover.
BATTERY INSTALLATION & SAFETY
8
The LED indicator (c) on the laser will flash when the battery is
low. In this case, use the included charger to charge the battery
or replace it with a new one. The battery can be charged while
inside the laser.
1. Rechargeable Li-Ion battery
2. Charger unit
3. Type-C USB charging cable
4. Battery LED indicator
• Red – charging
• Blue – fully charged
WARNING: Battery can deteriorate, leak or explode and
can cause injury or fire.
1. Do not shorten the battery terminals.
2. Do not dispose of battery into household waste.
3. Do not dispose of battery in re.
4. Defective or dead batteries must be disposed of according
to local regulations.
5. Keep the batteries out of children's reach.
3
2
9
65
OVERVIEW
8
c
1. Power switch
2. Top horizontal beam
3. Side vertical beam
4. Front vertical beam
5. 1/4" tripod mount
6. Battery cover
7. Type-C USB charging port
8. Keypad
a. Horizontal beam selector & indicator
b. Vertical beam selector & indicator
c. Pulse Mode button\Low battery indicator
d. Manual Mode button & indicator
4
2
3
b8a
d
1
7
10
OPERATING INSTRUCTIONS
Working in Automatic mode (self-leveling):
In Automatic mode the laser level will level itself within a ±3° range.
1. Remove the laser level from the case and place it on a solid,
flat, vibration free surface or on a tripod.
2. Push the POWER switch to ON mode. The bottom horizontal
beam and its LED indicator will turn on.
3. Choose the required beams by using the selector buttons:
a. Horizontal beam selector (a) operates in the following cycle:
Top beam (default) → No beams.
b. Vertical beam selector (b) operates in the following cycle:
Side beam (default) → Front beam → Both beams → No
beams.
4. If the initial inclination of the laser level is beyond ±3°, the laser
will alert by flashing and beeping. In this case reposition the
laser level on a more suitable surface.
Otros manuales para Prolaser 3D All-Lines
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Nivel láser de Kapro
Kapro
Kapro Prolaser Plus Manual de usuario
Kapro
Kapro Prolaser 883 GREEN Manual de usuario
Kapro
Kapro Prolaser Vector 873 GREEN Manual de usuario
Kapro
Kapro Prolaser 4D XTRA Green Manual de usuario
Kapro
Kapro Prolaser Plus 870 Manual de usuario
Kapro
Kapro PROLASER ALL-LINES 875 GREEN Manual de usuario
Kapro
Kapro 830 Manual de usuario
Kapro
Kapro Prolaser Plus 870 Manual de usuario
Kapro
Kapro MIXED PROLASER 875RG Manual de usuario
Kapro
Kapro PROLASER 896G Manual de usuario
Kapro
Kapro Prolaser Electrota 8991 Manual de usuario
Kapro
Kapro Prolaser 862 Manual de usuario
Kapro
Kapro Prolaser 3D All-Lines Manual de usuario
Kapro
Kapro Prolaser Plus 872 GREEN Manual de usuario
Kapro
Kapro Prolaser 3D All-Lines Manual de usuario
Kapro
Kapro Prolaser 3D All-Lines 883 Manual de usuario
Kapro
Kapro Prolaser Plus 870 Green Manual de usuario
Kapro
Kapro 962 Manual de usuario
Kapro
Kapro PROLASER ALL-LINES 875 GREEN Manual de usuario
Kapro
Kapro ROLASER 899 Manual de usuario
