JYTEK PXI-67931 Manual de usuario

PXI-67931

4x8 2-Wire Matrix Module

User’s Manual

Manual Rev.:

Date:

Rev. 1.1

Mar 8, 2022

Revision History.

1.00 09-07-2004 Initial release

1.1 08-03-2022 Remove Star Trigger Out functionality

Disclaimer

The information in this document is subject to change without prior notice in

order to improve reliability, design, and function and does not represent a

commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special,

incidental, or consequential damages arising out of the use or inability to use the

product or documentation, even if advised of the possibility of such

damages.

This document contains proprietary information protected by copyright. All

rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Trademarks

NuDAQ™, NuIPC™, NuDAM™, NuPRO™ are registered trademarks of JYTEK

Technology Inc. Other product names mentioned herein are used for

identification purposes only and may be trademarks and/or registered

trademarks of their respective companies.

Environmental Responsibility

JYTEK is committed to fulfill its social responsibility to

global environmental preservation through compliance

with the European Union's Restriction of Hazardous

Substances (RoHS) directive and Waste Electrical and

Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for JYTEK. We have enforced

measures to ensure that our products, manufacturing

processes, components, and raw materials have as little

impact on the environment as possible. When products are

at their end of life, our customers are encouraged to dispose

of them in accordance with the product disposal and/or

recovery programs prescribed by their nation or company.

Battery Labels (for products with battery)

废电池请回收

California Proposition 65 Warning

WARNING: This product can expose you to chemicals including

acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-

propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead,

DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the

State of California to cause cancer, and acrylamide, benzene, cadmium, lead,

mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl

materials, which are known to the State of California to cause birth defects

or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

Getting Service

Customer satisfaction is our top priority. Contact us should you require

any service or assistance.

SHANGHAI JYTEK CO.,LTD.

http://www.jytek.com

[email protected]

Web Site

Sales & Service

Telephone No.

Fax No.

Mailing Address

+86-21-50475899

300 Fang chun Rd., Zhangjiang Hi-Tech Park,

Pudong New Area, Shanghai 201203, China

Table of Contents • i

Table of Contents

How to Use This Manual ................................................................ ii

Chapter 1 Introduction .............................................................. 1

1.1 Features ............................................................................... 1

1.2 Applications .......................................................................... 2

1.3 Specifications ....................................................................... 2

1.4 Software Support ................................................................ 3

Chapter 2 Installation ................................................................ 5

2.1 Contents ............................................................................... 5

2.2 Unpacking ............................................................................ 5

2.3 Mechanical Drawing ............................................................. 6

2.4 Installing the switch module into a PXI Platform ................. 6

Chapter 3 Signal Connection ...................................................... 9

3.1 PXI-67931 Topology ............................................................. 9

3.2 PXI-67931 Pin assignment & Description ........................... 10

3.3 TB-6231 Terminal Board ..................................................... 11

Chapter 4 Operation Theorem ................................................. 21

4.1 Hardware Block Diagram ................................................... 21

4.2 Operation Mode ................................................................ 22

4.3 Handshaking ...................................................................... 22

4.4 Trigger Bus ........................................................................ 28

4.5 Auxiliary Digital I/O ............................................................ 29

4.6 Hot-Swap ........................................................................... 30

4.7 Emergency Shutdown ........................................................ 30

4.8 Watchdog Timer ................................................................. 31

Warranty Policy ........................................................................ 33

How to Use This Manual

This User Manual is designed to assist users in the installation of the JYTEK

PXI-67931, 4x8 2-Wire Matrix PXI Switch module.

Chapter 1 Introduction

Gives an outline and overview of JYTEK switch modules’

features, specifications, and applications.

Chapter 2 Installation

Describes how to install a switch module into a PXI chassis. For

software library and utilities installation, please refer to the

Software Users’ Guide.

Chapter 3 Signal Connection

Shows the pin assignments and terminal board connection of the

switch module.

Chapter 4 Operation Theorem

Describes function blocks on JYTEK switch modules and

operation instructions.

ii • How to use this Manual

Introduction • 1

Introduction

JYTEK PXI-67931 is a matrix module with 32 cross-point 2-wire relays (DPDT, 2 Form

C). The default configuration of the PXI-67931 is a 4-group 2x4 2-wire matrix. With

the termination board, TB-6231, users can flexibly choose one of the configurations:

one 4x8, two 4x4, one 2x16, two 2x8, and four 2x4. Any contact of the

PXI-67931 can connect to other contacts at the same bank, individually, or in

combination. The PXI-67931 matrix module simplifies wiring and makes it easy to

change the internal connection path.

The contact position of the relays can be changed either by direct software

commands or by following the instructions previously stored in the on-board scan

list. The scan list advances upon the trigger from external measurement devices,

such as a DMM. The scan list can also advance when the scan-delay timer expires. PXI

trigger functions are supported and software programmable. Multiple modules can be

synchronized without additional field wiring.

1.1

Features

•PXI specifications Rev. 2.0 compliant

•3U Eurocard form factor, CompactPCI compliant (PICMG 2.0 R3.0)

•PICMG 2.1 R2.0 CompactPCI Hot-Swap specifications compliant

•32 DPDT (2 Form C) non-latching relays

•Contact rating

•2A switching, 2A carrying

•220VDC, 125VAC

•200 operations per second

•1k-sample scanlist for deterministic scanning

•Provides handshaking signals to trigger external instruments

•Programmable emergency shutdown function and Watchdog timer for

safety critical applications

•Eight auxiliary 3.3 V/TTL digital inputs/outputs with 5V tolerance

•Supports PXI backplane triggers to synchronize multiple modules

•Fully software programmable

1.2

Applications

•Industrial ON/OFF control

•External high power relay driving and signal switching

•Laboratory automation

•Industrial automation

•Switch contact status sensing

•Limit switch monitoring

•Cooperating with other modules such as A/D and D/A peripherals to

implement a data acquisition and control system

1.3

Specifications

Relay Output

•Number of cross-points: 32 (2-wire)

•Relay type: DPDT (2 Form C), non-latching

•Switching capacity:

•Max. switching current: 2A

•Max. switching voltage: 220VDC, 125VAC

•Max. switching power: 60VA, 60W

•Failure rate: 10µA, 10mVDC

•Contact resistance: 100mΩ max.

•Relay set/reset time

•Operate time: 4ms max.

•Release time: 4ms max.

•Bounce time: 1ms max.

•Expected life:

•Mechanical life: 108 operations min.

•Electrical life: 105 operations min. (2A @ 30VDC, resistive load)

•Data transfer: Programmed I/O

Auxiliary Digital I/O

•Numbers of channel: 8 inputs/outputs

•Compatibility: 3.3 V/TTL (5V tolerant)

•Data transfers: programmed I/O

Handshaking Signals

•Programmable polarity

•Logic level: 3.3 V/TTL (5V tolerant)

•Trigger In source: AUX1, PXI trigger bus, PXI star trigger in

•Scanner Advanced destination: AUX0, PXI trigger bus

2 • Introduction

Introduction • 3

Safety functions

•Emergency shutdown

•Logic level: 3.3 V/TTL (5V tolerant)

•Active with logic low (for AUX2/SHDNn pin)

•Emergency shutdown sources: AUX2/SHDNn, PXI star trigger input,

PXI trigger bus

•Watchdog timer

•Base clock available: 10MHz, fixed

•Counter width: 32-bit

•Watchdog Timer Overflow sources: Onboard 32-bit watchdog timer,

PXI star trigger input, PXI trigger bus

General Specifications

•I/O Connector: 62-pin D-sub male

•Operating temperature: 0 to 55 °C

•Storage temperature: -20 to 70 °C

•Humidity: 5 to 95% non-condensing

•Power requirements (when all relays are activated simultaneously)

+5V +3.3V

1A 400mA

•Dimensions (not including connectors)

•160 mm x 100 mm

1.4

Software Support

JYTEK‘s ADL-SWITCH driver package is for Microsoft Windows operating systems,

including Windows 98/ME/NT/2000/XP.

The driver package also provides utilities to test your switch module, as well as

programming samples and source codes in Microsoft Visual Basic and Visual C/C++.

For other operating systems, please contact JYTEK for more information.

4 • Introduction

This page intentionally left blank.

Tabla de contenidos

Otros manuales de Unidad de control de JYTEK

JYTEK

JYTEK USB-61210 Manual de usuario

JYTEK

JYTEK PXIe-69529 Manual de usuario

JYTEK

JYTEK JY6302 Manual de usuario

JYTEK

JYTEK JY5312 Manual de usuario

JYTEK

JYTEK PCIe-5211 Manual de usuario

JYTEK

JYTEK PXI-67921 Manual de usuario

JYTEK

JYTEK JY6301 Manual de usuario

JYTEK

JYTEK PXI-93518 Manual de usuario

JYTEK

JYTEK USB-61900 Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario