Juniper EX Series Manual de usuario

Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet

You can mount an EX 3200 or EX 4200 switch on a 19-in. or 23-in. equipment rack

or cabinet by using mounting brackets. EX 3200 and EX 4200 switches are shipped

with mounting brackets and mounting screws to be used to secure the mounting

brackets to the chassis.

NOTE: If you are mounting multiple switches on a rack or cabinet, mount a switch

in the bottom of the rack or cabinet first and proceed to mount the rest of the switches

from bottom to top.

CAUTION: One person must be available to lift the switch while another secures the

switch to the rack or cabinet.

Before mounting an EX 3200 or EX 4200 switch on a rack or cabinet:

■Verify that the site meets the requirements described in Site Preparation Checklist

for EX 3200 and EX 4200 Switches.

■Place the rack or cabinet in its permanent location, allowing adequate clearance

for airflow and maintenance, and secure it to the building structure.

■Read General Safety Guidelines and Warnings for EX-series Switches, with

particular attention to Chassis Lifting Guidelines for EX 3200 and EX 4200

Switches.

■Remove the switch from the shipping carton (see Unpacking an EX 3200 or EX

4200 Switch).

■Attach mounting brackets to the switch chassis. See Attaching Rack-Mounting

Brackets to an EX 3200 or EX 4200 Switch.

Ensure that you have the following parts and tools available to mount an EX 3200

or EX 4200 switch on a rack or cabinet:

■Phillips (+) screwdriver, number 2

■Screws to secure the chassis to the rack or cabinet (not provided)

■Dust covers for ports (for EX 4200-24F switches only; optional)

To mount an EX 3200 or EX 4200 switch on a rack or cabinet (see

Figure 1 on page 2):

1. Have one person grasp both sides of the switch, lift the switch, and position it

in the rack or cabinet, aligning the mounting bracket holes with the threaded

holes in the rack or cabinet rail. Align the bottom hole in both the mounting

brackets with a hole in each rack or cabinet rail, making sure the chassis is level.

2. Have a second person secure the switch to the rack or cabinet rail by using

appropriate screws. Use the Phillips (+) screwdriver, number 2 to tighten the

screws.

Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet ■1

3. Verify that all the screws on one side of the rack or cabinet are aligned with the

screws on the other side and that the switch chassis is level.

4. If it is an EX 4200-24F switch, we recommend you insert dust covers in unused

SFP ports.

Figure 1: Mounting an EX 3200 or EX 4200 Switch on a Rack

Related Topics ■Connecting AC Power to an EX 3200 or EX 4200 Switch

■Connecting DC Power to an EX 3200 or EX 4200 Switch

■Connecting and Configuring an EX-series Switch (CLI Procedure)

■Connecting and Configuring an EX-series Switch (J-Web Procedure)

■Rack Requirements for EX 3200 and EX 4200 Switches

■Cabinet Requirements for EX 3200 and EX 4200 Switches

■Clearance Requirements for Airflow and Hardware Maintenance for EX 3200

and EX 4200 Switches

2■Mounting an EX 3200 or EX 4200 Switch on a Rack or Cabinet

Otros manuales para EX Series

15

Este manual sirve para los siguientes modelos

3

Tabla de contenidos

Otros manuales de Cambiar de Juniper

Juniper

Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV... Manual de usuario

Juniper

Juniper QFX10016 Manual de usuario

Juniper

Juniper QFX Series Instrucciones de instalación

Juniper

Juniper EX8200 Series Manual de instrucciones

Juniper

Juniper EX9208 Instrucciones de instalación

Juniper

Juniper EX4200 Series Instrucciones de instalación

Juniper

Juniper EX2300 Series Manual de usuario

Juniper

Juniper QFX3000-G QFabric Guía de referencia rápida

Juniper

Juniper EX Series Manual de usuario

Juniper

Juniper EX8200 Series Manual de usuario

Juniper

Juniper QFX5200-48Y Manual de usuario

Juniper

Juniper QFX5210 Manual de usuario

Juniper

Juniper EX2300 Series Instrucciones de instalación

Juniper

Juniper EX8208 Instrucciones de instalación

Juniper

Juniper EX9253 Instrucciones de instalación

Juniper

Juniper EX4300 Manual de usuario

Juniper

Juniper QFX5200 Instrucciones de instalación

Juniper

Juniper EX3200 Series Instrucciones de instalación

Juniper

Juniper EX8200 Series Manual de instrucciones

Juniper

Juniper QFX5120 Series Manual de usuario

Juniper

Juniper EX4500 Series Instrucciones de instalación

Juniper

Juniper QFX10016 Instrucciones de instalación

Juniper

Juniper EX3200 Series Manual de usuario

Juniper

Juniper EX2200 Series Guía

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario