Juniper EX Series Manual de usuario

Otros manuales para EX Series

15

Este manual sirve para los siguientes modelos

1

Otros manuales de Cambiar de Juniper

Juniper

Juniper EX2200 Series Instrucciones de instalación

Juniper

Juniper OCX1100-48SX Manual de usuario

Juniper

Juniper EX2200-C Manual de usuario

Juniper

Juniper EX4200 Series Instrucciones de instalación

Juniper

Juniper EX Series Manual de instrucciones

Juniper

Juniper EX4300 Manual de usuario

Juniper

Juniper EX9214 Manual de usuario

Juniper

Juniper EX8208 Manual de usuario

Juniper

Juniper EX3200 Series Manual de usuario

Juniper

Juniper EX3200 Series Manual de usuario

Juniper

Juniper QFX3500 Manual de usuario

Juniper

Juniper EX8200 Series Manual de instrucciones

Juniper

Juniper NETSCREEN-ISG 2000 Manual de usuario

Juniper

Juniper QFX3600 Manual del operador

Juniper

Juniper QFX3600 Manual del operador

Juniper

Juniper EX8200 Series Manual de usuario

Juniper

Juniper QFX5220 Instrucciones de instalación

Juniper

Juniper QFX5200-32C Manual de usuario

Juniper

Juniper EX8200 Series Manual de instrucciones

Juniper

Juniper EX4100 Manual de usuario

Juniper

Juniper QFX10002-36Q Manual de usuario

Juniper

Juniper EX Series Manual de usuario

Juniper

Juniper EX4500-40F-FB Manual de usuario

Juniper

Juniper EX Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift

Because of the switch's size and weight, we strongly recommend using a mechanical

lift to remove the switch. For instructions on removing a switch without using a

mechanical lift, see Removing an EX8208 Switch from a Rack or Cabinet Without

Using a Mechanical Lift.

Before you remove the switch using a lift:

■Ensure that the rack or cabinet is stable and secured to the building.

■Ensure that there is enough space to place the removed switch in its new location

and along the path to the new location.

■Read General Safety Guidelines and Warnings for EX Series Switches, with

particular attention to Chassis Lifting Guidelines for EX8200 Switches.

■Ensure that the switch has been safely powered off (see Powering Off an EX8200

Switch) and that you have unplugged (disconnected) the power cords to the

power supplies.

■Ensure that you have disconnected any cables or wires attached to the switch

ports.

CAUTION: When removing more than one switch from a rack or cabinet, remove

the switch in the top of the rack or cabinet first and proceed to remove the rest of

the switches from top to bottom.

Ensure that you have the following parts and tools available to remove the switch:

■A mechanical lift

■A Phillips (+) screwdriver, number 2 or number 3, depending on the size of

your rack mounting screws

To remove the switch using a lift (see Figure 1):

1. Use the appropriate Phillips (+) screwdriver to remove the 24 mounting screws

that attach the chassis front-mounting brackets to the rack or cabinet.

2. Move the lift to the rack and position it so that its platform is centered about 0.5

in. (1.27 cm) below the bottom of the switch chassis and as close to it as possible.

3. Carefully slide the switch from the adjustable mounting brackets attached to the

rack onto the lift.

4. Use the lift to transport the switch to its new location.

Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift ■1

Figure 1: Removing an EX8208 Switch Chassis Using a Mechanical Lift

Related Topics ■Removing an EX8208 Switch from a Rack or Cabinet Without Using a Mechanical

Lift

Published: 2009-07-15

2■Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift