Juniper M7i Manual de usuario

Connecting Power to a DC-Powered M7i Router

Connect DC power to the router by inserting power cables into the field-wiring

terminals on the faceplate of each power supply. Power and grounding cables are

not supplied with the router. For information about the required cable type, see M7i

Chassis Grounding, Connection, and Cable Specifications.

NOTE: The router must be connected to at least two separate external DC power

sources.

CAUTION: There is no standard color coding for DC power cables. The color coding

used by the external DC power source at your site determines the color coding for

the leads on the power cables that attach to the terminal studs on each power supply.

You must ensure that power connections maintain the proper polarity. The power

source cables might be labeled (+) and (–)to indicate their polarity.

To connect DC power to the router (see Figure 1):

1. Verify that there is no power flowing from either external power source, so that

the voltage across the leads of the power cables is 0 V. Ensure that there is no

chance that the cable leads might become active during the procedure.

2. For each power supply, verify that the power switch on the power supply faceplate

is in the OFF (O) position.

3. Connect the grounding cable to a proper earth ground for each external DC

power sources, if it is not already.

4. Verify that a licensed electrician has attached the cable lug provided with the

router to the grounding cable.

5. Using a number 2 Phillips screwdriver, remove the screws next to the grounding

symbol above the power supplies on the chassis rear. Secure the grounding cable

lug to the chosen grounding point by reinstalling and tightening the screws.

6. Verify that a licensed electrician has attached a listed power cable lug to each

power source cable.

7. Loop the power cables through the hook located on the faceplate to the right of

the field-wiring terminals.

8. Depending on the type of power cable lugs used, loosen or remove the screws

on the field-wiring terminals.

9. Insert the power cable lugs into the appropriate field-wiring terminals. Using a

number 1 Phillips screwdriver, turn the screw on each field-wiring terminal

clockwise to secure the power cable lug. Apply between 8 lb-in. (.9 Nm) and 9

lb-in. (1.02 Nm) of torque to each screw.

a. Insert the positive (+) source cable into the return terminal, which is labeled

RTN.

Connecting Power to a DC-Powered M7i Router ■1

b. Insert the negative (–) source cable into the input terminal, which is labeled

–48V.

10. Verify that the DC source power cabling and the grounding cabling are correct,

that they are not touching or blocking access to router components, and that

they do not drape where people could trip on them.

Figure 1: Connecting DC Power and Grounding Cables

Related Topics M7i Router DC Power Supply Specifications■

■M7i DC Power Electrical Safety Guidelines

■DC Power Wiring Sequence Warning for M Series, MX Series, and T Series Routers

Published: 2009-08-03

2■Connecting Power to a DC-Powered M7i Router

Otros manuales para M7i

4

Tabla de contenidos

Otros manuales de Enrutador de red de Juniper

Juniper

Juniper ACX500 Manual de usuario

Juniper

Juniper M-Series Manual de usuario

Juniper

Juniper MX10008 Instrucciones de instalación

Juniper

Juniper J2300 Manual de usuario

Juniper

Juniper TX MATRIX Instrucciones de instalación

Juniper

Juniper QFX10002 Manual de usuario

Juniper

Juniper M5 Manual de usuario

Juniper

Juniper ACX4000 Instrucciones de instalación

Juniper

Juniper Day One+ ACX7509 Manual de usuario

Juniper

Juniper ACX2000 Instrucciones de instalación

Juniper

Juniper PTX10001-36MR Manual de usuario

Juniper

Juniper ACX500 Instrucciones de instalación

Juniper

Juniper EX4600 Manual de usuario

Juniper

Juniper T1600 Manual de instalación y operación

Juniper

Juniper ACX2200 Manual de usuario

Juniper

Juniper JUNOS J Series Manual de usuario

Juniper

Juniper ACX1000 Instrucciones de instalación

Juniper

Juniper JCS 1200 Manual de usuario

Juniper

Juniper ACX2000 Manual de usuario

Juniper

Juniper M20 Guía del usuario

Juniper

Juniper E320 Manual de usuario

Juniper

Juniper MX480 Instrucciones de instalación

Juniper

Juniper QFX5100-48S Manual de usuario

Juniper

Juniper T1600 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad