Jungheinrich EJC 214 Manual de usuario

EJC 214-220 / EJC 212z-220z 11.10

Operating instructions

51141056

04.19

en-GB

EJC 212z

EJC 214z

EJC 216z

EJC 220z

EJC 214

EJC 216

EJC 220

Declaration of Conformity

Manufacturer

Jungheinrich AG, 22039 Hamburg, Germany

Description

Industrial truck

Type Option Serial no. Year of

manufacture

EJC 212z

EJC 214z

EJC 216z

EJC 220z

EJC 214

EJC 216

EJC 220

On behalf of

Date

EU DECLARATION OF CONFORMITY

The undersigned hereby declare that the powered truck described in detail complies

with the current versions of European Directives 2006/42/EG (Machinery Directive)

and 2014/30/EU (Electromagnetic Compatibility - EMC). The manufacturer is

authorised to compile the technical documentation.

04.19 en-GB

Foreword

Notes on the operating instructions

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide

sufficient instruction for the safe operation of the industrial truck. The information is

provided clearly and concisely. The chapters are arranged by letter and the pages

are numbered continuously.

The operator manual details different industrial truck models. When operating and

servicing the industrial truck, make sure that the particular section applies to your

truck model.

Our trucks are subject to ongoing development. We reserve the right to alter the

design, equipment and technical features of the system. No guarantee of particular

features of the truck should therefore be assumed from the present operating

instructions.

Safety notices and text mark-ups

Safety instructions and important explanations are indicated by the following

graphics:

DANGER!

Indicates an extremely hazardous situation. Failure to comply with this instruction will

result in severe irreparable injury and even death.

WARNING!

Indicates an extremely hazardous situation. Failure to comply with this instruction

may result in severe irreparable injury and even death.

CAUTION!

Indicates a hazardous situation. Failure to comply with this instruction may result in

slight to medium injury.

NOTICE

Indicates a material hazard. Failure to comply with this instruction may result in

material damage.

ZUsed before notices and explanations.

tIndicates standard equipment

oIndicates optional equipment

04.19 en-GB

Jungheinrich Aktiengesellschaft

Friedrich-Ebert-Damm 129

22047 Hamburg - Germany

Tel: +49 (0) 40/6948-0

www.jungheinrich.com

04.19 en-GB

Contents

A Correct Use and Application 11

1 General 11

2 Correct application 11

2.1 Lifting Passengers 11

3 Approved application conditions 12

3.1 Internal Operation Combined with Brief External or Cold Store

Operation (t) 13

3.2 Internal Operation in Cold Stores with Cold Store Equipment (o) 13

4 Proprietor responsibilities 14

5 Adding attachments and/or optional equipment 14

B Truck Description 15

1 Application 15

1.1 Truck models and rated capacity 15

2 Travel direction definition 16

3 Assemblies and Functional Description 17

3.1 Assembly Overview 17

3.2 Functional Description 19

4 Technical Specifications 22

4.1 Performance data 22

4.2 Dimensions 24

4.3 Weights 30

4.4 Tyre type 31

4.5 EN norms 32

4.6 Specifications according to RED guideline (Radio Equipment

Directive) for radio units 33

4.7 Conditions of use 33

4.8 Electrical Requirements 33

5 Identification Points and Data Plates 34

5.1 Indication Points 34

5.2 Data plate 36

5.3 Truck capacity plate 37

5.4 Wind loads 40

5.5 Capacity Plate for Stacking and Transport Operations 40

5.6 Capacity Plate for Stacking, Transport and Double-Deck Operations 41

C Transport and Commissioning 43

1 Lifting by crane 43

2 Transport 45

3 Using the Truck for the First Time 47

D Battery - Servicing, Recharging, Replacement 49

1 Safety Regulations Governing the Handling of Lead-Acid Batteries 49

2 Battery types 51

3 Exposing the battery 54

4 Charging the battery 55

4.1 Charging the battery with a stationary charger 56

04.19 en-GB

4.2 Charging the battery with an on-board charger (o) 57

5 Battery removal and installation 65

5.1 Changing the battery from the top 66

5.2 Removing the battery from the side 68

E Operation 73

1 Safety Regulations for the Operation of Forklift Trucks 73

2 Displays and Controls 75

2.1 Battery discharge monitor 79

2.2 Battery discharge indicator 80

3 Preparing the Truck for Operation 81

3.1 Checks and Operations to Be Performed Before Starting Daily Work 81

3.2 Preparing the truck for operation 82

3.3 Checks and operations to be carried out when the truck is operational 83

3.4 Parking the truck securely 84

4 Industrial Truck Operation 85

4.1 Safety regulations for truck operation 85

4.2 Emergency Disconnect 87

4.3 Automatic braking 89

4.4 Travel 90

4.5 Slow travel 93

4.6 Steering 94

4.7 Brakes 94

4.8 Load handler raise/lower 97

4.9 Lifting, transporting and depositing loads 100

4.10 Use as a Lift Work Table 108

5 Troubleshooting 109

5.1 Truck does not start 110

5.2 Load cannot be lifted 112

6 Operating the truck without its own drive system 113

6.1 Release and activate the drive wheel brake 113

7 Load handler emergency lowering 115

7.1 EJC 214/216/220 115

7.2 EJC 212z / 214z / 216z / 220z 116

8 Optional equipment 117

8.1 Emergency operation with service key GF60 117

8.2 CanCode Keypad (o) 119

8.3 Setting the truck parameters with CanCode 138

8.4 Parameters 140

8.5 Setting the Battery Parameters with CanCode 145

8.6 Set ELH 2415 / 2425 / 2435 Charger Characteristics with CanCode 147

8.7 CanDis Display Instrument (o) 149

8.8 Display unit (2 inch display) 151

8.9 Keyless Access System 156

8.10 General Information about the Use of Keyless Access Systems 157

8.11 Commissioning the Keypad and the Transponder Reader 157

8.12 Using the Display: 160

8.13 Using the Keypad 165

8.14 Operating the transponder reader 170

8.15 ISM access module (o) 174

04.19 en-GB

F Industrial Truck Maintenance 175

1 Operational Safety and Environmental Protection 175

2 Maintenance Safety Regulations 176

2.1 Working on the electrical system 177

2.2 Consumables and used parts 177

2.3 Wheels 177

2.4 Hydraulic system 178

2.5 Lift Chains 179

3 Lubricants and Lubrication Schedule 180

3.1 Handling consumables safely 180

3.2 Lubrication Schedule 182

3.3 Consumables 183

4 Maintenance and repairs 184

4.1 Preparing the truck for maintenance and repairs 184

4.2 Front cover disassembly 185

4.3 Lifting and jacking up the truck safely 186

4.4 Cleaning 187

4.5 Checking the hydraulic oil level 190

4.6 Check wheel attachment and wear 192

4.7 Checking electrical fuses 194

4.8 Restoring the truck to service after maintenance and repairs 195

5 Decommissioning the Industrial Truck 196

5.1 Prior to decommissioning 196

5.2 Action to be taken during decommissioning 196

5.3 Restoring the truck to service after decommissioning 197

6 Safety tests to be performed at intervals and after unusual incidents 198

7 Final de-commissioning, disposal 198

8 Human vibration measurement 198

G Maintenance, Inspection and Changing of Maintenance

Parts Requiring Replacement 199

1 Maintenance Contents EJC 212z/214z/216z 200

1.1 Owner 200

1.2 Customer Service 204

2 Maintenance Contents EJC 214/216 211

2.1 Owner 211

2.2 Customer Service 215

04.19 en-GB

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Máquina elevadora de Jungheinrich

Jungheinrich

Jungheinrich EJE 116 Manual de usuario

Jungheinrich

Jungheinrich EKS 110 Manual de usuario

Jungheinrich

Jungheinrich ETM 110 Manual de usuario

Jungheinrich

Jungheinrich EJC 110 Manual de usuario

Jungheinrich

Jungheinrich ERC 212 Manual de usuario

Jungheinrich

Jungheinrich DFG 316 Manual de usuario

Jungheinrich

Jungheinrich ETX 513 Manual de usuario

Jungheinrich

Jungheinrich EFG 535 Manual de usuario

Jungheinrich

Jungheinrich ERC 212 Manual de usuario

Jungheinrich

Jungheinrich EKE 30-2 ac Manual de usuario

Jungheinrich

Jungheinrich EMC 110/B 10 Manual de usuario

Jungheinrich

Jungheinrich DFG 425s Manual de usuario

Jungheinrich

Jungheinrich HC 10 Manual de usuario

Jungheinrich

Jungheinrich DFG 316s Manual de usuario

Jungheinrich

Jungheinrich DFG 435 Manual de usuario

Jungheinrich

Jungheinrich ETV 110 Manual de usuario

Jungheinrich

Jungheinrich ECE 320 Manual de usuario

Jungheinrich

Jungheinrich EJE 222 Manual de usuario

Jungheinrich

Jungheinrich ESC 316z Manual de usuario

Jungheinrich

Jungheinrich EFG 213 Manual de usuario

Jungheinrich

Jungheinrich HC 110 Manual de usuario

Jungheinrich

Jungheinrich EJE 225 Manual de usuario

Jungheinrich

Jungheinrich EJC 14 Manual de usuario

Jungheinrich

Jungheinrich EKS 310k Manual de usuario

Manuales populares de Máquina elevadora de otras marcas

Hyster

Hyster G108 Instrucciones de funcionamiento

ep ESL122 Manual de usuario

Cascade

Cascade D Series Manual

Daewoo

Daewoo D35S-2 Manual

Konecranes

Konecranes SMV 10-600B Manual de usuario

Cascade

Cascade G Series Manual de usuario

Manitou

Manitou MC 40 Powershift Manual de usuario

Hyundai

Hyundai 50DS-7E Manual de usuario

Pegasolift

Pegasolift W12 Instrucciones de montaje

Multi-Mover

Multi-Mover XXL 10 TO Manual de usuario

Noblelift

Noblelift PT 20I Manual

Lifter

Lifter QX 20 EVO Manual de usuario

Noblelift

Noblelift SPN22 Manual

Noblelift

Noblelift PT 27R Manual

Noblelift

Noblelift PS30RM Manual

Noblelift

Noblelift PS35LSL Manual

Noblelift

Noblelift PT E30 Manual

Still

Still CX-M 10 Manual de usuario