Jungheinrich ERC 212 Manual de usuario

ERC 212/214/216/212z/214z/216z 03.11

Operating instructions

51147713

04.19

en-GB

ERC 212

ERC 214

ERC 216

ERC 212z

ERC 214z

ERC 216z

Declaration of Conformity

Manufacturer

Jungheinrich AG, 22039 Hamburg, Germany

Description

Industrial truck

Type Option Serial no. Year of

manufacture

ERC 212

ERC 214

ERC 216

ERC 212z

ERC 214z

ERC 216z

On behalf of

Date

EU DECLARATION OF CONFORMITY

The undersigned hereby declare that the powered truck described in detail complies

with the current versions of European Directives 2006/42/EG (Machinery Directive)

and 2014/30/EU (Electromagnetic Compatibility - EMC). The manufacturer is

authorised to compile the technical documentation.

04.19 en-GB

Foreword

Notes on the operating instructions

The present ORIGINAL OPERATING INSTRUCTIONS are designed to provide

sufficient instruction for the safe operation of the industrial truck. The information is

provided clearly and concisely. The chapters are arranged by letter and the pages

are numbered continuously.

The operator manual details different industrial truck models. When operating and

servicing the industrial truck, make sure that the particular section applies to your

truck model.

Our trucks are subject to ongoing development. We reserve the right to alter the

design, equipment and technical features of the system. No guarantee of particular

features of the truck should therefore be assumed from the present operating

instructions.

Safety notices and text mark-ups

Safety instructions and important explanations are indicated by the following

graphics:

DANGER!

Indicates an extremely hazardous situation. Failure to comply with this instruction will

result in severe irreparable injury and even death.

WARNING!

Indicates an extremely hazardous situation. Failure to comply with this instruction

may result in severe irreparable injury and even death.

CAUTION!

Indicates a hazardous situation. Failure to comply with this instruction may result in

slight to medium injury.

NOTICE

Indicates a material hazard. Failure to comply with this instruction may result in

material damage.

ZUsed before notices and explanations.

tIndicates standard equipment

oIndicates optional equipment

04.19 en-GB

Jungheinrich Aktiengesellschaft

Friedrich-Ebert-Damm 129

22047 Hamburg - Germany

Tel: +49 (0) 40/6948-0

www.jungheinrich.com

04.19 en-GB

Contents

A Correct Use and Application 11

1 General 11

2 Correct application 11

2.1 Lifting Passengers 11

3 Approved application conditions 12

3.1 Internal Operation Combined with Brief External or Cold Store

Operation (t) 13

3.2 Internal Operation in Cold Stores with Cold Store Equipment (o) 13

4 Proprietor responsibilities 14

5 Adding attachments and/or optional equipment 14

B Truck Description 15

1 Application 15

1.1 Truck models and rated capacity 15

2 Travel direction definition 16

3 Assemblies and Functional Description 17

3.1 Assembly Overview 17

3.2 Functional Description 19

4 Technical Specifications 22

4.1 Performance data 22

4.2 Dimensions 23

4.3 Weights 26

4.4 Tyre type 26

4.5 EN norms 27

4.6 Conditions of use 28

4.7 Electrical Requirements 28

5 Identification Points and Data Plates 29

5.1 Indication Points 29

5.2 Data plate 30

5.3 Truck capacity plate 31

5.4 Capacity Plate for Stacking and Transport Operations 33

5.5 Capacity Plate for Stacking, Transport and Double-Deck Operations 35

5.6 Wind loads 37

C Transport and Commissioning 39

1 Lifting by crane 39

2 Transport 41

3 Using the Truck for the First Time 42

D Battery - Servicing, Recharging, Replacement 43

1 Safety Regulations Governing the Handling of Lead-Acid Batteries 43

2 Battery types 45

3 Exposing the battery 46

4 Charging the battery 48

4.1 Charging the battery with a stationary charger 49

4.2 Charging the battery with an on-board charger (o) 50

5 Battery removal and installation 56

04.19 en-GB

5.1 Changing the battery from the top 57

5.2 Lateral Battery Removal (ERC 212/214/216) 59

5.3 Lateral Battery Removal (ERC 212z/214z/216z) 61

E Operation 63

1 Safety Regulations for the Operation of Forklift Trucks 63

2 Displays and Controls 65

2.1 Battery discharge monitor 70

2.2 Battery discharge indicator 71

3 Preparing the Truck for Operation 72

3.1 Checks and Operations to Be Performed Before Starting Daily Work 72

3.2 Preparing the truck for operation 74

3.3 Checks and operations to be carried out when the truck is operational 75

3.4 Parking the truck securely 76

4 Industrial Truck Operation 78

4.1 Safety regulations for truck operation 78

4.2 How to act in hazardous situations 80

4.3 Emergency Disconnect 80

4.4 Automatic braking 82

4.5 Travel 83

4.6 Steering 89

4.7 Brakes 89

4.8 Switch Matrix / Safety Switch Height 91

4.9 Load handler raise/lower 93

4.10 Lifting, transporting and depositing loads 96

4.11 Use as a Lift Work Table 105

5 Troubleshooting 106

5.1 Truck does not start 107

5.2 Load cannot be lifted 108

6 Operating the truck without its own drive system 109

6.1 Release and activate the drive wheel brake 109

7 Load handler emergency lowering 111

7.1 ERC 212/212z 111

7.2 ERC 214/216/214z/216z 112

8 Optional equipment 113

8.1 CanCode Keypad (o) 113

8.2 Setting the truck parameters with CanCode 132

8.3 Parameters 134

8.4 Setting the Battery Parameters with CanCode 140

8.5 CanDis Display Instrument (o) 142

8.6 Display unit (2 inch display) 144

8.7 Keyless Access System 149

8.8 General Information about the Use of Keyless Access Systems 150

8.9 Commissioning the Keypad and the Transponder Reader 150

8.10 Using the Display: 153

8.11 Using the Keypad 158

8.12 Operating the transponder reader 163

8.13 ISM access module (o) 167

F Industrial Truck Maintenance 169

1 Operational Safety and Environmental Protection 169

2 Maintenance Safety Regulations 170

04.19 en-GB

2.1 Working on the electrical system 171

2.2 Consumables and used parts 171

2.3 Wheels 171

2.4 Hydraulic system 172

2.5 Lift Chains 173

3 Lubricants and Lubrication Schedule 174

3.1 Handling consumables safely 174

3.2 Lubrication Schedule 176

3.3 Consumables 178

4 Maintenance and repairs 179

4.1 Preparing the truck for maintenance and repairs 179

4.2 Front cover disassembly 180

4.3 Lifting and jacking up the truck safely 181

4.4 Cleaning 182

4.5 Checking the hydraulic oil level 185

4.6 Check wheel attachment and wear 187

4.7 Checking electrical fuses 189

4.8 Restoring the truck to service after maintenance and repairs 190

5 Decommissioning the Industrial Truck 191

5.1 Prior to decommissioning 191

5.2 Action to be taken during decommissioning 191

5.3 Restoring the truck to service after decommissioning 192

6 Safety tests to be performed at intervals and after unusual incidents 193

7 Final de-commissioning, disposal 193

8 Human vibration measurement 193

G Maintenance and Inspection 195

1 Maintenance Contents ERC 212/214/216 196

1.1 Owner 196

1.2 Customer Service 200

2 Maintenance Contents ERC 212z/214z/216z 207

2.1 Owner 207

2.2 Customer Service 211

04.19 en-GB

Otros manuales para ERC 212

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Máquina elevadora de Jungheinrich

Jungheinrich

Jungheinrich HC 110 Manual de usuario

Jungheinrich

Jungheinrich ETV 110 Manual de usuario

Jungheinrich

Jungheinrich ETX 513 Manual de usuario

Jungheinrich

Jungheinrich ESE 220 Manual de usuario

Jungheinrich

Jungheinrich EJD K18 Manual de usuario

Jungheinrich

Jungheinrich ETV C16 Manual de usuario

Jungheinrich

Jungheinrich EKE 30-2 ac Manual de usuario

Jungheinrich

Jungheinrich DFG 425s Manual de usuario

Jungheinrich

Jungheinrich DFG 540 Manual de usuario

Jungheinrich

Jungheinrich EFG 213 Manual de usuario

Jungheinrich

Jungheinrich EJD 220 Manual de usuario

Jungheinrich

Jungheinrich ECE 320 Manual de usuario

Jungheinrich

Jungheinrich DFG 316s Manual de usuario

Jungheinrich

Jungheinrich EFG 213 Manual de usuario

Jungheinrich

Jungheinrich DFG 425s Manual de usuario

Jungheinrich

Jungheinrich EJC 110 Manual de usuario

Jungheinrich

Jungheinrich ERC 212 Manual de usuario

Jungheinrich

Jungheinrich ETM 110 Manual de usuario

Jungheinrich

Jungheinrich ETR 314 Manual de usuario

Jungheinrich

Jungheinrich DFG 316s Manual de usuario

Jungheinrich

Jungheinrich EKS 110 Manual de usuario

Jungheinrich

Jungheinrich ERC-Z12 Manual de usuario

Jungheinrich

Jungheinrich DFG 316 Manual de usuario

Jungheinrich

Jungheinrich DFG 316 Manual de usuario

Manuales populares de Máquina elevadora de otras marcas

Hyster

Hyster G108 Instrucciones de funcionamiento

ep ESL122 Manual de usuario

Cascade

Cascade D Series Manual

Daewoo

Daewoo D35S-2 Manual

Konecranes

Konecranes SMV 10-600B Manual de usuario

Cascade

Cascade G Series Manual de usuario

Manitou

Manitou MC 40 Powershift Manual de usuario

Hyundai

Hyundai 50DS-7E Manual de usuario

Pegasolift

Pegasolift W12 Instrucciones de montaje

Multi-Mover

Multi-Mover XXL 10 TO Manual de usuario

Noblelift

Noblelift PT 20I Manual

Lifter

Lifter QX 20 EVO Manual de usuario

Noblelift

Noblelift SPN22 Manual

Noblelift

Noblelift PT 27R Manual

Noblelift

Noblelift PS30RM Manual

Noblelift

Noblelift PS35LSL Manual

Noblelift

Noblelift PT E30 Manual

Still

Still CX-M 10 Manual de usuario