Johnson 40-6690 Manual de usuario

Pipe Laser

Model No. 40-6690

Instruction Manual

Congratulations on your choice of this Pipe Laser. We suggest you read

this instruction manual thoroughly before using the pipe laser. Save this

instruction manual for future use.

The 40-6690 pipe laser is an easy-to-use laser that provides underground

contractors line, elevation, and grade control for installing storm, sanitary, or

other gravity-flow drainage pipe. This system can also be used for tunneling,

boring, pipe alignment, or any other application requiring line, elevation, and

grade control.

The pipe laser emits a highly visible red beam of laser light in a direction at a

predetermined (grade) for the alignment of gravity-flow pipe. The laser light is

intercepted at the opposite end of the pipe by the pipe laser target. To align

the pipe, position it so that the pipe laser’s beam is centered in the target.

This is a Class a laser tool and is manufactured to comply with CFR 21,

parts 1040.10 and 1040.11 as well as international safety rule EC 285.

4429H-English_Manuals 2/18/11 9:40 AM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety nstructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating nstructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Care and Handling

11. Product Warranty

12. Warranty Registration

13. Accessories

1. Kit Contents

Description for Model 40-6690 Qty.

Pipe Laser 1

Rechargeable Battery pack 1

Alkaline Battery Pack (batteries not included) 1

6.4V Charger Adapter 1

12V Car Charger 1

Targets 2

Leg Sets 5

3rd Leg 1

Remote Control with 9V Battery 1

nstruction Manual with Warranty Card 1

4429H-English_Manuals 2/18/11 9:40 AM Page 2

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class a Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS TOOL EMITS LASER RADIATIO .

DO OT STARE I TO BEAM.

AVOID DIRECT EYE EXPOSURE.

2. Features and Functions

• Electric self-leveling

• Out of level indicator, laser beam will blink and LCD symbol will

indicate out of level position

• Large grade range

• Quickly reset the line to the center position

• Stand by mode to conserve battery

• Operates with remote control

• Various leg sets and targets for different size pipe

• Waterproof

4429H-English_Manuals 2/18/11 9:40 AM Page 3

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. f unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

4429H-English_Manuals 2/18/11 9:40 AM Page 4

4. Location/Content of Warning Labels

4429H-English_Manuals 2/18/11 9:40 AM Page 5

5. Location of Part/Components

Line & axis pivot

marker & LED

Back remote

receiving window

LCD window

Keypad

Handle

External

power

receptacle

Battery pack

Back leg

1/4” hread Mount

Front leg

Grade - Axis

pivot marker

Laser Exit

Window

Front

remote

receiving

window

4429H-English_Manuals 2/18/11 9:40 AM Page 6

Optional Adjustable rivet Stand 40-6391

Elevating lock

knob

IL lock knob Adjusting knobs

Laser mounting

Accessories Included

Small and large targets Various leg sets

4429H-English_Manuals 2/18/11 9:40 AM Page 7

6. Operating Instructions

IMPORTA T: t is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery installation

a) Put 4 “D” alkaline batteries into the

battery pack following the polarity direc-

tion indication. Put the alkaline battery

pack cover back, and install the battery

pack into the laser.

b) nstall the rechargeable battery

pack into the laser.

Recharging the battery pack

Plug the adapter into the charging port on the rechargeable battery.

The adapter box charging LED is red during the charging process,

and it will turn to green when the battery is fully charged.

Alkaline battery box installation

Rechargeable battery box installation

Charging LED on adapter box Charging the battery pack

outside the laser

Charging the battery pack

with rechargeable battery

pack in laser

4429H-English_Manuals 2/18/11 9:40 AM Page 8

Additional External Power Cables included

1) 12V adapter 2) Car adapter

ote: Recharge the battery when the battery indication shows low or

no power.

Using the Optional 40-6391 Adjustable Trivet Stand:

1. When a laser is to be set on a flat surface where the laser beam is

not centered in the pipe, use model 40-6391 Trivet Stand.

2. Using this system, the elevation of the laser beam can be set by

either measuring down from a grade offset hub outside the trench or

up from the floor of the manhole to the beam.

The pipe laser can be fixed to the 40-6391 adjustable trivet stand as

indicated by the picture below. Loosen the elevating lock knob to

adjust the height, loosen the T LT lock knob to adjust the T LT angle.

Laser Placement with leg sets:

Choose the different size leg sets for different size pipe. (6” or 150mm

(no legs), 8” or 200mm, 10” or 250mm, 12” or 300mm, 15” or

400mm, 21” or 500mm).

4429H-English_Manuals 2/18/11 9:40 AM Page 9

For 3 feet support of the pipe laser:

Screw the silver adapter to the hole under the handle of the pipe

laser. Attach one leg to the adapter and two legs to the front of the

pipe laser as shown in picture.

4429H-English_Manuals 2/18/11 9:40 AM Page 10

Otros manuales para 40-6690

Tabla de contenidos

Otros manuales de Nivel láser de Johnson

Johnson

Johnson 40-6688 Manual de usuario

Johnson

Johnson 40-6174 Manual de usuario

Johnson

Johnson 40-6650 Manual de usuario

Johnson

Johnson 40-0915 Manual de usuario

Johnson

Johnson 40-6680 Manual de usuario

Johnson

Johnson 40-6650 Manual de usuario

Johnson

Johnson 40-6683 Manual de usuario

Johnson

Johnson 40-6164 Manual de usuario

Johnson

Johnson 40-6670 Manual de usuario

Johnson

Johnson 40-6535 Manual de usuario

Johnson

Johnson 40-6602 Manual de usuario

Johnson

Johnson Hot Shot 40-0917 Instrucciones de uso

Johnson

Johnson JLX LEVEL UP 40-6681 Manual de usuario

Johnson

Johnson 40-6641 Manual de usuario

Johnson

Johnson 40-0918 Manual de usuario

Johnson

Johnson 40-6028 Manual de usuario

Johnson

Johnson 40-6601 Manual de usuario

Johnson

Johnson 40-6647 Manual de usuario

Johnson

Johnson 40-6616 Manual de usuario

Johnson

Johnson 40-6515 Manual de usuario

Johnson

Johnson 40-6060 Manual de usuario

Johnson

Johnson 40-6060 Manual de usuario

Johnson

Johnson 40-6650 Manual de usuario

Johnson

Johnson 40-0612 Manual de usuario

Manuales populares de Nivel láser de otras marcas

Nedo

Nedo ET-5 Manual de usuario

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manual de usuario

LaserLiner

LaserLiner X2-Laser Manual de usuario

Spectra

Spectra LL300N Manual de usuario

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manual de usuario

Nedo

Nedo Crossliner 4 Manual de usuario

Lasertec

Lasertec FX360G Manual de usuario

Flex

Flex ALC 8 Manual de usuario

Black & Decker

Black & Decker LZR5 Manual de usuario

Cocraft

Cocraft HL 20-SG Manual de usuario

Zircon

Zircon iLine Manual de usuario

HWH

HWH 310 SERIES Manual de usuario

Leica

Leica iCON robot 60 Manual de usuario

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manual de usuario

LaserLiner

LaserLiner ActiveFinder XP Manual de usuario

DeWalt

DeWalt DW082 Manual de usuario

imex

imex EL20 Manual de usuario

Fixturlaser

Fixturlaser NXA D I-0912 Manual de usuario