Jacuzzi Finestra FL61000 Instrucciones de instalación

FINESTRA WALK-IN BATH

INSTALLATION / OPERATION INSTRUCTIONS

Installer: Leave this manual for homeowner.

Homeowner: Read this manual and keep for future reference.

ALSO FIND MANUAL ON-LINE AT JACUZZI.COM

Save These Instructions for Future Use.

Complete and mail in the product registration card provided with your unit.

Write and save the model and serial number of your unit below.

Owner's Record

Date Purchased _________________________________________________________

Purchased From _________________________________________________________

Installed By _____________________________________________________________

Serial Number ___________________________________________________________

Model__________________________________________________________________

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 2 FL61000B • 10/07

WARNING: When using this unit, basic precautions should always be followed, including the following.

WARNING: Use this unit only for its intended use as described in this manual. Do not use attachments not recommended by the

manufacturer.

DANGER: To reduce the risk of injury, do not permit children to use this unit unless they are closely supervised at all times.

WARNING: Never drop or insert any object into any opening.

CAUTION: Risk of Electric Shock: The Finestra Bath may have two power sources in which case two disconnect switches are

required to de-energize the unit before servicing.

INSTALLATION

NOTE: This is a professional grade product. A knowledge of construction techniques, plumbing and electrical installation

according to codes are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the

installation of all Jacuzzi Whirlpool Bath products. Our warranty does not cover improper installation related problems.

NOTE: Install this unit in accordance with the Canadian Electrical Code, Part 1.

CAUTION: This equipment is intended for indoor use only. Install the equipment in accordance with these instructions. Use supply

wires that are suitable for 75°C, including the temperature rating of the supply conductors to be used.

This unit should be electrically grounded and installed by a licensed contractor, electrician, and plumber.

Building materials and wiring should be routed away from the motor/pump or blower or other heat producing components of this

unit.

A pressure wire connector is provided on the exterior of the motor/pump and heater to permit connection of an No. 8 AWG (8.4

mm) solid copper bonding conductor between this unit and all other electric equipment and exposed metal in the vicinity, as needed

to comply with local requirements.

WARNING: This unit must be connected only to a supply circuit that is protected by a 15 A ground fault circuit interrupter (GFCI).

Such a GFCI should be provided by the installer and should be tested on a routine basis. To test the GFCI, push the test button.

The GFCI should interrupt power. Push the reset button. Power should be restored. If the GFCI fails to operate in this manner,

the GFCI is defective. If the GFCI interrupts power to the bathtub without the test button being pushed, a ground current owing,

indicating a possibility of an electric shock. Do not use this hydromassage bathtub. Disconnect the hydromassage bathtub and

have the problem corrected by a qualied service representative before using.

WARNING: (For permanently connected units) A green-colored terminal (or a wire connector) marked “G,” “GR,” “GROUND,”

or “GROUNDING”) is provided within the terminal compartment. To reduce the risk of electric shock, connect the terminal or

connector to the grounding terminal of your electric service or supply panel with a conductor equivalent in size to the circuit

conductors supplying the equipment.

For built-in and drop-in units, install to permit access for servicing.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSONS

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 3 FL61000B • 10/07

OPERATION

CAUTION: Test the ground fault circuit interrupter protecting this appliance periodically in accordance with manufacturer’s

instructions.

WARNING: Risk of hyperthermia and possible drowning: Water temperature in excess of 104°F (40°C) may be injurious to your

health. Check and adjust water temperature before use.

WARNING: Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs when the internal temperature of

the body reaches a level several degrees above the normal body temperature of 98.6°F. The symptoms of hyperthermia include an

increase in the internal temperature of the body, dizziness, lethargy, drowsiness and fainting. The effects of hyperthermia include:

• Failure to perceive heat

• Failure to recognize the need to exit the spa or hot tub

• Unawareness of impending hazard

• Fetal damage in pregnant women

• Physical inability to exit the spa or hot tub

• Unconsciousness resulting in danger of drowning

WARNING: Risk of fetal injury: Pregnant or possibly pregnant women should consult a physician before using a hydromassage

bathtub equipped with a heater.

WARNING: The use of alcohol, drugs or medication can greatly increase the risk of fatal hyperthermia. People using medications

or having an adverse medical history should consult a physician before using a hydromassage bathtub equipped with a heater.

WARNING: Risk of hyperthermia and possible drowning: Do not use a hydromassage bathtub equipped with a heater immediately

following strenuous exercise.

WARNING: Do not operate this unit without the guard over the suction tting.

WARNING: Keep body and hair a minimum of 6” (152 mm) away from suction tting at all times when the hydromassage system is

operating. Hair longer than shoulder length should be secured close to the head.

WARNING: Do not tamper with user-operated controls or such devices.

WARNING: Use this unit only for its intended use as described in this manual. Do not use attachments not recommended by the

manufacturers.

WARNING: To avoid injury, exercise caution when entering or exiting the hydromassage bathtub.

WARNING: Risk of electrical shock: Do not permit electrical appliances such as a hair dryer, lamp, telephone, radio or television)

within 60” (1.5 m) of this hydromassage bathtub.

• Do not operate hydromassage system unless the bath is lled with water to at least 1-2” (25-51 mm) above highest jet

• Do not immerse the control panel by overlling the bath

• Do not use oil-based bath additives in your hydromassage bath

• When cleaning your bath, do not use abrasive substances which will damage the bath’s surface

• To prevent discoloration of the acrylic nish, do not ll the bath with water in excess of 140°F (60°C)

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.

The Company has obtained applicable code (standards) listings generally available on a national basis for products

of this type. It is the responsibility of the installer/owner to determine specic local code compliance prior to installation of the

product. The Company makes no representation or warranty regarding, and will not be responsible for any code compliance.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 4 FL61000B • 10/07

CONTENTS

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Framing and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Service Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Level Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Plumbing and Water Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Water Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Controlling Whirlpool Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Control Panel Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Proper Door Closure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Rapid Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Vacuum Pressure Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

High Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Pro3Ozone Sanitation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning the Bath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Repairs to the Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Bath Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Purging the Whirlpool System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Systems Clean™ Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Ozone Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Suction/Intake Cover/Strainer Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Airbath Interconnection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Whirlpool Bath Interconnection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Salon Bath Interconnection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Authorized Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Warranty

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 5 FL61000B • 10/07

SPECIFICATIONS

Important: Read complete instructions before beginning installation.

Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly, heater, plumbing, and ttings

necessary for whirlpool operation. A rotary drain/overow kit is provided for installation on the bath, and an optional remote drain/

overow assembly is also available.

Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do not lift

the bath by the plumbing at any time; handle by the shell only or the aluminum handles provided at the ends of the unit.

Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the nish, do not

install the bath. Damage or defect to the nish claimed after the bath is installed is excluded from the warranty. Jacuzzi Whirlpool

Bath’s responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims for

damage to the carrier. For denitions of warranty coverage and limitations, refer to the published warranty information packed with

the product.

All bath units are factory tested for proper operation and watertight connections prior to shipping.

NOTE: Prior to installation, the bath must be lled with water and operated to check for leaks that may have resulted from shipping

damage or mishandling. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or

avoided by following this inspection and testing procedure.

* Add 1/4" to this dimension when roughing-in for 3-wall niche.

FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit (See page 7 to 12).

NOTE: 1. Measurements inside each unit represent cutout in oor to allow for drain/overow.

2. All measurements are in inches. To convert to millimeters, multiply inches by 25.4.

3. Service access dimensions given are minimum size.

4. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6.4 mm).

Model

Dimensions

Drain/Overow

Dimensions

Cutout

Total Weight/Floor

Operating

Gallonage

Product

Weight

Skirt/

Mounting

Heater

Finestra™ 6030

LH, RH

60” (1524 mm) L

30” (762 mm) W

38-1/2” (952.5) H

15” (381 mm) A

11-11/16” (297 mm) B

See

below

1038 lb (472 kg),

41.5 lb/ft2(202 kg/m2)

55 gal (208 liter) min,

75 gal (284 liter) max

See pages

6 to 11

Integral Factory

installed

Finestra™ 6036

LH, RH

60” (1524 mm) L

36” (914 mm) W

38-1/2” (952.5) H

18” (457 mm) A

11-11/16” (297 mm) B

See

below

1177 lb (535 kg),

47.1 lb/ft2(229 kg/m2)

55 gal (208 liter) min,

85 gal (321 liter) max

See pages

6 to 11

Integral Factory

installed

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

SPECIFICATIONS LH=Left Hand, RH=Right Hand

11-11/16" 11-11/16"

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 6 FL61000B • 10/07

SPECIFICATIONS

Technical Speciﬁcations

Dimensions

60” L x 30” W x 38-1/2” H

(1524 mm) L x (762 mm) W x (977.9 mm) H

Drain/Overﬂow

A: 31-1/2” (800 mm) B: 11-11/16” (297 mm)

Cutout

Total Weight

EU50, EU55: 340 lb. (154.5 kg)

EY10, EY15: 340 lb. (154.5 kg)

EV85, EV90: 310 lb. (141 kg)

EY00, EY05: 310 lb. (141 kg)

Operating Gallonage

Max: 75 U.S. Gal. (284 liters)

Min: 55 U.S. Gal. (208 liters)

Product Weight

EU50, EU55: 280 lb. (127 kg)

EY10, EY15: 280 lb. (127 kg)

EV85, EV90: 260 lb. (118 kg)

EY00, EY05: 260 lb. (118 kg)

Skirt Mounting

Electrical Speciﬁcations (Models EU50, EU55, EY10, EY15 only)

Motor/Pump and RapidHeat™: 120 VAC, 20 AMP, 60 Hz.

Heater

RapidHeat™: (P/N BN60000) comes standard on;

*(Models EU50, EU55, EY10, and EY15 only)

Installation Notes

Refer to installation instructions included with ﬁxture before

beginning installation. Please conﬁrm product availability and

speciﬁcations before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO

CHANGE WITHOUT NOTICE.

Ordering Information

Product Code:

EU50 Finestra™ 6030 Walk-In 14" Seat Whirlpool Bath, LH

EU55 Finestra™ 6030 Walk-In 14" Seat Whirlpool Bath, RH

EY10 Finestra™ 6030 Walk-In 17” Seat Whirlpool Bath, LH

EY15 Finestra™ 6030 Walk-In 17” Seat Whirlpool Bath, RH

EV85 Finestra™ 6030 Walk-In 14" Seat Bath, LH

EV90 Finestra™ 6030 Walk-In 14" Seat Bath, RH

EY00 Finestra™ 6030 Walk-In 17” Seat Bath, LH

EY05 Finestra™ 6030 Walk-In 17” Seat Bath, RH

• Left and Right Hand drain locations

• Standard drain kit, No. FB48827

• Accessories / Hardware:

Remote Drain Kit: #FC30XXX

Pillow: #EK91959

• Trim Kit Finishes Available:

Standard Part No. BN21XXX

(827) – Chrome

(829) – Bright Brass

(898) – Brushed Chrome

(826) – Brushed Nickel

(845) – Oil-Rubbed Bronze

(805) – Platinum

(815) – Satin Nickel

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14" or 17"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

60"

30"

17-1/2"

15"

6-5/8"

37"

13-3/4"

20"

4" x 16"

27" H x 24" L

Service Access

Motor

SeatFloor

FINESTRA™ 6030

*Heater

27" H x 9" L

Service Access

Door

Finestra™ 6030 Walk-In 14" Seat Whirlpool Bath Left Hand (EU50) shown.

* Measurements inside unit represent cutout in ﬂoor to allow for drain/overﬂow.

Minimum service access dimensions given.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 7 FL61000B • 10/07

SPECIFICATIONS

Technical Speciﬁcations

Dimensions

60” L x 30” W x 38-1/2” H

(1524 mm) L x (762 mm) W x (977.9 mm) H

Drain/Overﬂow

A: 31-1/2” (800 mm) B: 11-11/16” (297 mm)

Cutout

Total Weight

EW05, EW10: 360 lb. (163.5 kg)

EY30, EY35: 360 lb. (163.5 kg)

Operating Gallonage

Max: 75 U.S. Gal. (284 liters)

Min: 55 U.S. Gal. (208 liters)

Product Weight

EW05, EW10: 310 lb. (141 kg)

EY30, EY35: 310 lb. (141 kg)

Skirt Mounting

Electrical Speciﬁcations

Requires two seperate GFCI protected circuits.

Motor/Pump and RapidHeat™: 240 VAC, 20 AMP, 60 Hz.

Blower: 120 VAC, 20 AMP, 60 Hz.

Heater (Standard)

RapidHeat™: P/N BN60000

Installation Notes

Refer to installation instructions included with ﬁxture before

beginning installation. Please conﬁrm product availability and

speciﬁcations before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO

CHANGE WITHOUT NOTICE.

Ordering Information

Product Code:

EW05 Finestra™ 6030 Walk-In 14" Seat Salon™ Spa

Bath, Left Hand

EW10 Finestra™ 6030 Walk-In 14" Seat Salon™ Spa

Bath, Right Hand

EY30 Finestra™ 6030 Walk-In 17" Seat Salon™ Spa

Bath, Left Hand

EY35 Finestra™ 6030 Walk-In 17" Seat Salon™ Spa

Bath, Right Hand

• Left and Right Hand drain locations

• Standard drain kit, No. FB48827

• Accessories / Hardware:

Remote Drain Kit: #FC30XXX

Pillow: #EK91959

• Trim Kit Finishes Available:

Standard Part No. BN21XXX

(827) – Chrome

(829) – Bright Brass

(898) – Brushed Chrome

(826) – Brushed Nickel

(845) – Oil-Rubbed Bronze

(805) – Platinum

(815) – Satin Nickel

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14" or 17"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

60"

30"

17-1/2"

15"

6-5/8”

37"

13-3/4"

20"

4" x 16"

Motor

SeatFloor

FINESTRA™ 6030

Blower

Heater

27" H x 24" L

Service Access

27" H x 9" L

Service Access

Door

Finestra™ 6030 Walk-In 14" Seat Salon™ Spa Bath Left Hand (EW05) shown.

* Measurements inside unit represent cutout in ﬂoor to allow for drain/overﬂow.

Minimum service access dimensions given.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 8 FL61000B • 10/07

SPECIFICATIONS

Technical Speciﬁcations

Dimensions

60” L x 30” W x 38-1/2” H

(1524 mm) L x (762 mm) W x (977.9 mm) H

Drain/Overﬂow

A: 31-1/2” (800 mm) B: 11-11/16” (297 mm)

Cutout

Total Weight

EV95, EW00: 320 lb. (145 kg)

EY20, EY25: 320 lb. (145 kg)

Operating Gallonage

Max: 75 U.S. Gal. (284 liters)

Min: 55 U.S. Gal. (208 liters)

Product Weight

EV95, EW00: 270 lb. (122 kg)

EY20, EY25: 270 lb. (122 kg)

Skirt Mounting

Electrical Speciﬁcations

Requires a dedicated GFCI protected separate circuit.

Blower: 115 VAC, 15 AMP, 60 Hz.

Installation Notes

Refer to installation instructions included with ﬁxture before

beginning installation. Please conﬁrm product availability and

speciﬁcations before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO

CHANGE WITHOUT NOTICE.

Ordering Information

Product Code:

EV95 Finestra™ 6030 Walk-In 14" Seat Pure Air Bath,

Left Hand

EW00 Finestra™ 6030 Walk-In 14" Seat Pure Air Bath,

Right Hand

EY20 Finestra™ 6030 Walk-In 17" Seat Pure Air Bath,

Left Hand

EY25 Finestra™ 6030 Walk-In 17" Seat Pure Air Bath,

Right Hand

• Left and Right Hand drain locations

• Standard drain kit, No. FB48827

• Accessories / Hardware:

Remote Drain Kit: #FC30XXX

Pillow: #EK91959

• Trim Kit Finishes Available:

Standard Part No. BN21XXX

(827) – Chrome

(829) – Bright Brass

(898) – Brushed Chrome

(826) – Brushed Nickel

(845) – Oil-Rubbed Bronze

(805) – Platinum

(815) – Satin Nickel

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14" or 17"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

60"

30"

17-1/2"

15"

6-5/8"

37"

13-3/4"

20"

4" x 16"

SeatFloor

FINESTRA™ 6030

Blower

27" H x 24" L

Service Access

27" H x 9" L

Service Access

Door

Finestra™ 6030 Walk-In 14" Seat Pure Air Bath Left Hand (EV95) shown.

* Measurements inside unit represent cutout in ﬂoor to allow for drain/overﬂow.

Minimum service access dimensions given.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 9 FL61000B • 10/07

SPECIFICATIONS

Technical Speciﬁcations

Dimensions

60” L x 30” W x 38-1/2” H

(1524 mm) L x (762 mm) W x (977.9 mm) H

Drain/Overﬂow

A: 31-1/2” (800 mm) B: 11-11/16” (297 mm)

Cutout

Total Weight

EU60, EU65: 360 lb. (163.5 kg)

EY50, EY55: 360 lb. (163.5 kg)

EW15, EW20: 340 lb. (154.5 kg)

EY40, EY45: 340 lb. (154.5 kg)

Operating Gallonage

Max: 85 U.S. Gal. (322 liters)

Min: 70 U.S. Gal. (265 liters)

Product Weight

EU60, EU65: 310 lb. (141 kg)

EY50, EY55: 310 lb. (141 kg)

EW15, EW20: 290 lb. (132 kg)

EY40, EY45: 290 lb. (132 kg)

Skirt Mounting

Electrical Speciﬁcations (Models EU60, EU65, EY50, EY55 only)

Motor/Pump and RapidHeat™: 120 VAC, 20 AMP, 60 Hz.

Heater

RapidHeat™: P/N BN60000

*(Models EU60, EU65, EY50, EY55 only)

Installation Notes

Refer to installation instructions included with ﬁxture before

beginning installation. Please conﬁrm product availability and

speciﬁcations before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO

CHANGE WITHOUT NOTICE.

Ordering Information

Product Code:

EU60 Finestra™ 6036 Walk-In 14" Seat Whirlpool Bath, LH

EU65 Finestra™ 6036 Walk-In 14" Seat Whirlpool Bath,

EY50 Finestra™ 6036 Walk-In 17" Seat Whirlpool Bath, LH

EY55 Finestra™ 6036 Walk-In 17" Seat Whirlpool Bath, RH

EW15 Finestra™ 6036 Walk-In 14" Seat Bath, LH

EW20 Finestra™ 6036 Walk-In 14" Seat Bath, RH

EY40 Finestra™ 6036 Walk-In 17" Seat Bath, LH

EY45 Finestra™ 6036 Walk-In 17" Seat Bath, RH

• Left and Right Hand drain locations

• Standard drain kit, No. FB48827

• Accessories / Hardware:

Remote Drain Kit: #FC30XXX

Pillow: #EK91959

• Trim Kit Finishes Available:

Standard Part No. BN21XXX

(827) – Chrome

(829) – Bright Brass

(898) – Brushed Chrome

(826) – Brushed Nickel

(845) – Oil-Rubbed Bronze

(805) – Platinum

(815) – Satin Nickel

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14" or 17"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

60"

36"

17-1/2"

18"

6-5/8"

37"

13-3/4"

26"

4" x 16"

Motor

SeatFloor

FINESTRA™ 6036

*Heater

27" H x 24" L

Service Access

27" H x 9" L

Service Access

Door

Finestra™ 6036 Walk-In 14" Seat Whirlpool Bath Left Hand (EU60) shown.

* Measurements inside unit represent cutout in ﬂoor to allow for drain/overﬂow.

Minimum service access dimensions given.

Jacuzzi Whirlpool Bath: Finestra Walk-in Bath Page 10 FL61000B • 10/07

SPECIFICATIONS

Technical Speciﬁcations

Dimensions

60” L x 30” W x 38-1/2” H

(1524 mm) L x (762 mm) W x (977.9 mm) H

Drain/Overﬂow

A: 31-1/2” (800 mm) B: 11-11/16” (297 mm)

Cutout

Total Weight

EW35, EW40: 370 lb. (168 kg)

EY70, EY75: 370 lb. (168 kg)

Operating Gallonage

Max: 85 U.S. Gal. (322 liters)

Min: 70 U.S. Gal. (265 liters)

Product Weight

EW35, EW40: 320 lb. (145 kg)

EY70, EY75: 320 lb. (145 kg)

Skirt Mounting

Electrical Speciﬁcations

Requires two seperate GFCI protected circuits.

Motor/Pump and RapidHeat™: 230 VAC, 20 AMP, 60 Hz.

Blower: 120 VAC, 15 AMP, 60 Hz.

Heater (Standard)

RapidHeat™: P/N BN60000

Installation Notes

Refer to installation instructions included with ﬁxture before

beginning installation. Please conﬁrm product availability and

speciﬁcations before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO

CHANGE WITHOUT NOTICE.

Ordering Information

Product Code:

EW35 Finestra™ 6036 Walk-In 14" Seat Salon™ Spa

Bath, Left Hand

EW40 Finestra™ 6036 Walk-In 14" Seat Salon™ Spa

Bath, Right Hand

EY70 Finestra™ 6036 Walk-In 17" Seat Salon™ Spa

Bath, Left Hand

EY75 Finestra™ 6036 Walk-In 17" Seat Salon™ Spa

Bath, Right Hand

• Left and Right Hand drain locations

• Standard drain kit, No. FB48827

• Accessories / Hardware:

Remote Drain Kit: #FC30XXX

Pillow: #EK91959

• Trim Kit Finishes Available:

Standard Part No. BN21XXX

(827) – Chrome

(829) – Bright Brass

(898) – Brushed Chrome

(826) – Brushed Nickel

(845) – Oil-Rubbed Bronze

(805) – Platinum

(815) – Satin Nickel

DRAIN/OVERFLOW

BACK FRONTLEFT END RIGHT END

14" or 17"

1-1/2"

6-1/2"

29-1/2"

16-3/4"

17-1/2"

13-3/4"

Service Access

Service

Access

60"

36"

17-1/2"

18"

6-5/8"

37"

13-3/4"

26"

4" x 16" Motor

SeatFloor

FINESTRA™ 6036

Blower

Heater

27" H x 24" L

Service Access

27" H x 9" L

Service Access

Door

Finestra™ 6036 Walk-In 14" Seat Salon™ Spa Bath Left Hand (EW35) shown.

* Measurements inside unit represent cutout in ﬂoor to allow for drain/overﬂow.

Minimum service access dimensions given.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Jacuzzi de Jacuzzi

Jacuzzi

Jacuzzi Cetra 532 Manual de usuario

Jacuzzi

Jacuzzi J-LXK Manual de instrucciones

Jacuzzi

Jacuzzi Fuzion 7260 Manual de usuario

Jacuzzi

Jacuzzi J-SHA Manual de usuario

Jacuzzi

Jacuzzi Select Series Manual de usuario

Jacuzzi

Jacuzzi J-135 Manual de usuario

Jacuzzi

Jacuzzi Fresco Y950 Manual de usuario

Jacuzzi

Jacuzzi J-200 Series Manual de instrucciones

Jacuzzi

Jacuzzi Duetta 6642 Manual de usuario

Jacuzzi

Jacuzzi J-100 Manual de usuario

Jacuzzi

Jacuzzi alimia Guía

Jacuzzi

Jacuzzi DELFINO Manual de usuario

Jacuzzi

Jacuzzi LCD Series Manual de usuario

Jacuzzi

Jacuzzi J585 Manual de usuario

Jacuzzi

Jacuzzi Alexa Manual de usuario

Jacuzzi

Jacuzzi Spa MAXI Andros Manual de usuario

Jacuzzi

Jacuzzi Finestra 6036 Manual de usuario

Jacuzzi

Jacuzzi J-200 Series Manual de usuario

Jacuzzi

Jacuzzi Delos Manual de usuario

Jacuzzi

Jacuzzi Milano H546 Manual de usuario

Jacuzzi

Jacuzzi AERO PLUS PortableWhirlpoolSpa Manual de usuario

Jacuzzi

Jacuzzi SWIMSPA Series Manual de usuario

Jacuzzi

Jacuzzi J - 210 Guía

Jacuzzi

Jacuzzi MAJORA 6 Manual de usuario

Manuales populares de Jacuzzi de otras marcas

Bestway

Bestway Lay-Z-Spa 54189 Manual de usuario

Morphy Richards

Morphy Richards Essentials PC4006 Manual de usuario

Softub

Softub PRESTIGE Manual de usuario

JNJ SPAS

JNJ SPAS SPA-318 Manual de instalación

KIRAMI

KIRAMI Comfort Family Manual de usuario

QCA Spa

QCA Spa VS501 PAK (VL260 TOPSIDE) Manual de usuario

HoMedics

HoMedics FB-655HJ-GB Manual de usuario

Everyday Hot Tubs

Everyday Hot Tubs 530 Manual de usuario

anko

anko SS-601A Manual de usuario

Pooli

Pooli OS030979B Manual de usuario

ab Solares Smart Spa Manual de usuario

CalderaSpas

CalderaSpas CalderaSpas Utopia Series Manual de usuario

Outsunny

Outsunny 848-047V70 Manual de usuario

Aquatic

Aquatic INFINITY 1 Manual de usuario

Master Spas

Master Spas MP Force Manual de usuario

Asteria

Asteria 5630 Manual de usuario

Image

Image IMSB61610, IMSG61610 Manual de usuario

ViSAGE

ViSAGE FM-588D Manual de usuario