Intermec 4630 Manual de usuario

4630 and 4830

Bar Code Label Printer

P/N 063879-003

User’s Manual

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1998 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Adara, Duratherm,

EZBuilder, Precision Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or

registered trademarks of Intermec.

Throughout this manual, trademarked names may be used. Rather than put a trademark (or )

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

The software contained in the printer and the accompanying materials are copyrighted.

Unauthorized copying of the software, including software that has been modified, merged, or

included with other software, or the written materials is expressly forbidden without the prior

written consent of Intermec. All right, title, and interest in all copies of this software are and shall at

all times remain the sole and exclusive property of Intermec. Customer may be held legally

responsible for any copyright infringement that is caused or encouraged by its failure to abide by

these terms.

Manual Change Record

This page records the changes to this manual, which was originally released as

version 001.

Version Date Description of Change

002 5/97

Information has been updated to correspond with the

printer firmware upgrade. The manual has also been

formatted to 8.5 x 11 inches.

003 4/98

Removed the label design and IPL commands

chapters. This information can be found in the

IPL

Programming Reference Manual (P/N 066396).

Contents

Before You Begin xi

Warranty Information xi

Safety Summary xi

Warnings, Cautions, and Notes xii

About This Manual xiii

Other Intermec Manuals xiv

Getting Started

Getting to Know Your Printer 1-3

Preparing the Printer for Installation 1-4

Plugging in the Printer 1-5

Opening and Closing the Printer 1-5

Choosing the Print Mode and Media 1-6

Loading Fanfold Media 1-6

Loading Roll-Fed Media 1-7

Loading Thermal Transfer Ribbon 1-8

Printing a Configuration Test Label 1-9

Connecting the Printer to Your System 1-10

Connecting the Printer to a PC Serial Port 1-10

Connecting the Printer to a PC Parallel Port 1-11

Connecting the Printer to a Network 1-11

Connecting the Printer to an AS/400 1-11

Connecting the Printer to a Mainframe 1-12

Cabling in Noisy Electrical Environments 1-12

Configuring the Serial Ports 1-13

Verifying Printer Communications With Your System 1-14

4630 and 4830 Bar Code Label Printers User’s Manual

Operating and Configuring the Printer

Using the Control Panel 2-3

Reading the Display 2-3

Using the Control Panel Keys 2-4

Understanding the Indicator Lights 2-4

Using the Menu Panel 2-5

About the Printer Menus 2-5

Operator and Install Menus 2-6

Service Menu 2-7

Configuration Menu 2-8

Tips for Using the Control and Menu Panels 2-9

Setting Security Levels 2-9

Setting the Dark Adjust 2-10

Using the X and Y Forms Adjust 2-11

Adjusting the Label Rest Point 2-12

Printing the Buffer Contents 2-13

Adjusting the Media Sensor 2-13

Adjusting the Printer for Different Width Media 2-14

Removing Thermal Transfer Ribbon 2-15

Adding Additional Memory 2-16

Increasing Image Memory 2-16

Using the Media Rewind Hub 2-17

Using the Self-Strip Assembly 2-18

Using the Cutter 2-19

Routing Media Through the Heavy-Duty Cutter 2-19

Routing Media Through the 4630 Standard Cutter 2-20

Enabling the Cutter 2-21

Testing Cutter Operation 2-21

Changing Printer Configuration Settings 2-22

Changing Label Configuration Settings 2-23

Contents

vii

Setting the Media Alert 2-24

Printing Configuration Test Labels 2-26

Restoring the Printer Default Configuration 2-27

Maintaining the Printer

Inspecting the Printer 3-3

Components to Maintain 3-3

Cleaning the Printer 3-4

Cleaning the Printhead 3-4

Cleaning the Drive Roller and the Tear Bar 3-5

Cleaning the Media Path 3-6

Cleaning the Heavy-Duty Cutter Assembly 3-7

Cleaning the 4630 Standard Cutter Assembly 3-8

Cleaning the Printer Cover 3-8

Troubleshooting

Troubleshooting Checklist 4-3

Printer Operation Problems 4-4

Print Quality Problems 4-5

Communications Problems 4-6

Error Messages 4-6

Error Codes 4-11

Using the Print Tests 4-12

Printing Data Sent From the Host 4-13

Increasing Available Memory 4-14

Print Quality 4-14

Media Selection 4-15

Print Speed 4-15

Formats 4-15

Dark Adjust 4-15

Printhead Aging 4-16

4630 and 4830 Bar Code Label Printers User’s Manual

viii

Special Procedures

Performing Cloning 5-3

Preparing the Receiver Printer 5-4

Preparing the Sender Printer and Downloading Data 5-4

Performing Selective Transfer 5-5

Preparing the Receiver Printer 5-5

Preparing the Sender Printer 5-6

Sending Formats, Fonts, Pages, and Graphics to the Receiver Printer 5-6

Setting the Maximum Print Speed 5-7

Printer Reference

Comparing the 4630 and 4830 to the 4400 A-3

4630 and 4830 Printer Specifications A-4

Communications A-4

Electrical A-4

Environmental A-4

Fonts A-5

Indicators and Keys A-5

Media A-5

Media Dimensions A-6

Options A-7

Physical A-7

Printing A-8

Printer Functional Boundaries A-9

Bar Code Symbologies A-10

2D Symbologies A-11

2D Stacked Symbologies A-11

2D Matrix Symbologies A-11

International Character Sets A-13

4630/4830 Character Table A-13

Translation Character Table A-14

Extended Character Sets A-14

Code Page 850 Character Table A-19

Contents

ASCII Conversion Chart A-20

Communications Reference

Communication Protocols B-3

Intermec “Standard” B-3

XON/XOFF B-4

XON/XOFF, No Status B-5

Polling Mode D B-5

Multi-Drop B-5

Host Requirements B-5

Communication Protocol Characters B-6

Communication Boundaries B-7

Communication Interfaces B-7

Printer Serial Ports B-8

Interface Cables and Connectors B-8

Glossary

Index

Otros manuales para 4630

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Etiquetadora de Intermec

Intermec

Intermec 3400 Manual de usuario

Intermec

Intermec EasyCoder PX4i Manual de usuario

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec EasyCoder 201II Manual de usuario

Intermec

Intermec PM4I Manual de usuario

Intermec

Intermec EasyCoder PF4i Manual de usuario

Intermec

Intermec EasyCoder PD4 Manual de usuario

Intermec

Intermec EasyCoder E4 Manual de usuario

Intermec

Intermec EasyCoder PC41 Manual de usuario

Intermec

Intermec EasyCoder PX4i Manual de usuario

Intermec

Intermec PC23 Manual de usuario

Intermec

Intermec EasyCoder PX6i Manual de usuario

Intermec

Intermec PB51 Manual de usuario

Intermec

Intermec EasyCoder PX6i Manual de usuario

Intermec

Intermec EasyCoder 501 E Manual de usuario

Intermec

Intermec EasyCoder 301 Manual de usuario

Intermec

Intermec EasyCoder 501XP Manual de usuario

Intermec

Intermec EasyCoder E4 Linerless Manual de usuario

Intermec

Intermec EasyCoder PX4i Manual de usuario

Intermec

Intermec EasyCoder PD4 Manual de usuario

Intermec

Intermec EasyCoder 401 Manual de usuario

Intermec

Intermec PB50 Manual de usuario

Intermec

Intermec EasyCoder PD41 Manual de usuario

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario