Intermec Transaction Manager 9560 Manual de usuario

nugget code39

helconital

9560 Transaction Manager

P/N 059724-005

User’s

Manual

nugget code39

helconital

IntermecCorporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

1996 by Intermec Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Duratherm, Precision

Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of

Intermec Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark (or )

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

nugget code39

helconital

iii

Manual Change Record

This page records changes to the manual. The manual was released at Rev. A.

Revision Date Description of Change

001 4/93 Illustrations in Chapters 1 and 2 were revised to reflect the

redesigned housing.

The mounting plate template was deleted from the appendix.

The Table of Contents and Index reflect changes to each chapter.

002 9/93 Two bar codes in Chapter 4 were corrected.

003 8/94 Complete rewrite of manual to add new product features and

make the manual easier to use.

004 3/7/95 Corrected several bar codes in Chapter 7 and replaced entire

chapter. Issued interim update P/N 062755-001 for updating

the existing -003 manuals.

Added note about magnetic card reader data formats to page

4-9.

005 12/96 Reformatted to fit 8.5 x 11 page size.

Replaced “End Accumulate” bar codes with "Exit Configuration

and Save” bar codes.

Added NUL (%U) to several bar codes in Chapter 7 for

disabling configuration settings.

Corrected bar codes with spaces for new version of font.

Contents

Before You Begin xv

Warranty Information xv

Safety Summary xv

Warnings, Cautions, and Notes xvi

About This Manual xvi

Other Intermec Manuals xx

Getting Started

Roadmap 1-3

The 9560 Transaction Manager 1-4

9560 Component Options 1-5

Optional Input Devices 1-6

Data Formats and Programming 1-6

Memory 1-6

Bar Code Symbologies 1-7

Communications 1-7

Status Beeps 1-7

Preparing to Install the 9560

Getting Ready to Install the 9560 2-3

Determining a Mounting Location 2-4

Choosing Secured or Unsecured Wiring 2-5

Selecting External Devices 2-5

Choosing Input Devices 2-5

Attaching Wands and Scanners 2-5

Attaching Devices to the Terminal Plug 2-6

Installing the 9560 Without Input Devices 2-6

Unattended Scanning 2-6

Using the Sense Inputs 2-7

Using the Output Relays 2-9

Attaching Audio Output Devices 2-9

Connecting to a Data Collection System 2-10

Cable Interface Requirements 2-10

Null Modem Cable Diagram and Modem Connector Pin Assignments 2-11

Modem Cable Diagram and Terminal Connector Pin Assignments 2-12

9560 Transaction Manager User’s Manual

Connecting Directly to a Computer 2-13

Connecting to a Computer and Terminal 2-13

Connecting to a Port Concentrator or System Unit 2-14

Direct Wiring 2-16

Multi-drop Line Wiring 2-16

Meeting Power Supply Requirements 2-18

Installing the 9560

Overview of Installing the 9560 3-3

Routing Cables and Power Supply 3-5

Routing With Secured Wiring 3-6

Routing With Unsecured Wiring 3-7

Connecting External Devices 3-8

Connecting Input Devices 3-9

Connecting to Sense Inputs 3-9

Connecting to Output Relays 3-11

Connecting Audio Devices 3-12

Connecting to a Data Collection Host System 3-12

Attaching the Mounting Plate 3-13

Attaching the 9560 to the Wall 3-15

Starting and Operating the 9560

Starting the 9560 4-3

Starting the 9560 With the Magnetic Card Reader 4-4

Reading Bar Code Labels 4-5

Multiple-Read Labels 4-5

Regular Labels 4-5

Using the Slot Scanner 4-6

Bar Code Placement 4-6

Using the Magnetic Card Reader 4-7

Using a Wand 4-8

Using a Laser Scanner 4-9

Optimum Scanning 4-10

Contents

vii

Using the Keypad 4-11

Function Key Layout 4-12

Data Communications and Operating Options

Introduction to Data Communications 5-3

Data Communications in a Data Collection System 5-3

The ISO Data Communications Model 5-3

Physical Layer 5-4

Data Link Layer 5-4

Full-Duplex Protocols Versus Half-Duplex Protocols 5-5

Full-Duplex Devices Versus Half-Duplex Devices 5-5

The DLE Character and XON/XOFF Flow Control 5-5

Working With Protocols 5-6

Point-to-Point Protocol 5-6

Polling Mode D Protocol 5-7

Multi-drop Protocol 5-7

User-Defined and User-Defined Multi-drop Protocols 5-8

Tips for Defining Secure Protocols 5-8

Buffering Received Data 5-9

Communication Delays 5-9

Data Format Requirements 5-10

SOM Character (Start of Message) 5-10

Preambles and Postambles 5-10

EOR Characters (End of Record) 5-11

EOF Characters (End of File) 5-11

Record 5-11

Records per Block 5-11

EOM Characters (End of Message) 5-12

Error Checking 5-12

Displaying Data on the 9560 5-12

Types of Data Displayed 5-12

Display Settings and Formatting 5-13

Buffered Display 5-13

Transparent Display 5-13

Formatting the Display 5-13

Display Overflow 5-14

Displaying ASCII Control Codes 5-15

Displaying Data on a Terminal 5-15

Buffered Terminal Operation 5-16

Transparent Terminal Operation 5-17

9560 Transaction Manager User’s Manual

viii

Nonbuffered Full-Duplex Operation 5-18

Nonbuffered Half-Duplex Operation 5-18

Block Terminal Operation 5-18

Displaying International Character Sets 5-19

Using the Katakana Character Set 5-23

Entering Katakana Characters 5-25

Assigning a Function Key to Katakana and US-ASCII Character Sets 5-26

Kana Mode Character Tables 5-26

Ro-maji Mode Character Table 5-29

9560 Operating Modes and Command Types 5-31

Accumulate Mode 5-31

Full ASCII Mode 5-32

Command Types 5-32

Configuring the 9560

Specifying Configuration Parameters 6-3

Using Batch Configuration 6-10

Batch Configuration Example 6-10

Downloading Configuration Commands 6-11

Download Command Example 6-11

Using Prompting Configuration Mode 6-12

Entering Prompting Configuration Mode 6-12

Moving Around in Prompting Configuration Mode 6-13

Finding Help in Prompting Configuration Mode 6-14

Exiting Prompting Configuration Mode 6-14

Prompting Configuration Mode Example 6-14

Standard Display Prompts 6-16

Large-Type Display Prompts 6-21

Configuration Commands

Using the Configuration Commands 7-3

ADDR (Address, Multidrop) 7-4

AFF (Affirmative Acknowledgment) 7-5

Append Time to Data 7-6

Baud Rate 7-7

Beeper Volume 7-8

Contents

Character Set 7-9

Codabar 7-10

CODE 11 7-12

CODE 39 7-13

CODE 93 7-14

Code 128 7-15

Computer Response Required Mode (CRRM) 7-16

Data Bits 7-17

Display Setting 7-18

EOM (End of Message) 7-19

Full ASCII 7-20

Intercharacter Delay 7-21

Interface 7-22

Interleaved 2 of 5 (I 2 of 5) 7-23

IRL BAK (Bad Program Acknowledge) 7-24

IRL END (End of Program) 7-25

IRL EOF (End of File) 7-26

IRL EOP (End of Program Block) 7-27

IRL EOR (End of Record) 7-28

IRL PAK (Program Acknowledge) 7-29

IRL PSS (Program Statement Separator) 7-30

IRL RUN 7-31

IRL SOP (Start of Program Block) 7-32

Katakana 7-33

LRC (Longitudinal Redundancy Check) 7-36

NEG (Negative Acknowledgment) 7-37

Parity 7-38

POL (Poll) 7-39

Preamble A Required 7-40

Protocol 7-41

Records per Block 7-42

REQ (Request for Acknowledgment) 7-43

RES (Reset) 7-44

Resume IRL 7-45

Scanner Timeout 7-46

Scanner Operation 7-47

SEL (Select) 7-48

Select Terminal Mode 7-49

SOM (Start of Message) 7-50

Stop Bits 7-51

Trigger Event 7-52

Time in Seconds 7-53

Timeout Delay 7-54

Turnaround Delay 7-55

9560 Transaction Manager User’s Manual

2 of 5 (Two of Five) 7-56

UPC/EAN 7-57

XOFF 7-60

XON 7-61

Data Entry Commands

Using Data Entry Commands 8-3

Entering Data Entry Commands 8-4

Backspace 8-5

Capacity 8-5

Clear 8-6

Command 8-7

Command Override 8-7

Default Configuration 8-8

Delete Data 8-9

Enable Clock 8-10

Enter Accumulate 8-11

Enter Auto Trigger Mode 8-11

Enter Computer Response Required Mode (CRRM) 8-12

Enter Configuration Mode 8-12

Enter Display Editor 8-13

Enter Full ASCII Mode 8-13

Enter IRL Editor 8-14

Enter Prompting Configuration Mode 8-14

Enter Record 8-15

Exit Accumulate and Transmit 8-15

Exit Auto Trigger Mode 8-16

Exit Computer Response Required Mode (CRRM) 8-16

Exit Configuration Mode, Do Not Save Settings 8-17

Exit Configuration Mode, Save Settings 8-17

Exit Full ASCII Mode 8-18

Exit IRL Editor 8-18

Exit Program 8-19

Forward 8-19

High Beep 8-20

Laser Trigger 8-20

Laser Untrigger 8-21

LED/Relay Control 8-22

Low Beep 8-24

Preamble A 8-25

Preamble B 8-26

Postamble C 8-27

Tabla de contenidos

Otros manuales de Lector de código de barras de Intermec

Intermec

Intermec SR60 Manual de usuario

Intermec

Intermec IV7 Manual de usuario

Intermec

Intermec IP30 Manual de usuario

Intermec

Intermec 1009FF01 Manual de usuario

Intermec

Intermec ScanPlus 1802 Manual de usuario

Intermec

Intermec IF4 Manual de usuario

Intermec

Intermec ScanPlus 1800 Manual de usuario

Intermec

Intermec SG10T Manual de usuario

Intermec

Intermec IV6 Manual de usuario

Intermec

Intermec ScanPlus 1800 Manual de usuario

Intermec

Intermec SR60 Manual de usuario

Intermec

Intermec ScanPlus 1800VT Manual

Intermec

Intermec SR61XR Manual de usuario

Intermec

Intermec Sabre 1545 Manual de usuario

Intermec

Intermec IP4 Manual de usuario

Intermec

Intermec SR61B Manual de usuario

Intermec

Intermec SR60 Manual de usuario

Intermec

Intermec SF51 Manual de usuario

Intermec

Intermec MaxiScan 3100 Manual de usuario

Intermec

Intermec SR60 Manual de usuario

Intermec

Intermec Sabre 1555 Manual de usuario

Intermec

Intermec IF30 Manual de usuario

Intermec

Intermec SR31T Manual de usuario

Intermec

Intermec IV6 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario