Intermec Sabre 1552 Scanner Manual de usuario

Sabre 1552 Bar

Code Scanner

User's Guide

1233*

Intermec Technologies Corporation

6001 36th Avenue West

Everett, WA 98203

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-668-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S.A and Canada: Contact your local Intermec service

supplier.

The information contained herein is proprietary and is provided solely

for the purpose of allowing customers to operate and/or service

Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without the written

permission of Intermec.

Information and specifications in this manual are subject to change

without notice.

2002 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, INCA (under license),

MobileLAN, JANUS, IRL, Trakker Antares, EZBuilder, TE 2000, Data

Collection Browser, dcBrowser, Universal Access Point, UAP,

Duratherm, EasyCoder, Precision Print, PrintSet, Virtual Wedge, and

CrossBar are either trademarks or registered trademarks of Intermec.

Throughout this manual, trademarked names may be used. Rather than

put a trademark (or ) symbol in every occurrence of a trademarked

name, we state that we are using the names only in an editorial fashion,

and to the benefit of the trademark owner, with no intention of

infringement.

1233*

iii

Contents

Overview of the Sabre 1552 Scanner 5

Unpacking the Scanner 7

Understanding the Features 8

Light 8

Beeps 9

Electrical Rating 9

Associating the Scanner to the MicroBar 9745 Base

Station 10

Operating the Scanner 11

Configuring the Marker Beam 13

Troubleshooting the Scanner 14

Maintaining the Scanner 16

Accessories for the Scanner 17

More Information 19

1233*

blank

1233*

Overview of the Sabre 1552 Scanner

The Intermec Sabre 1552 Scanner delivers quick, effortless bar code

scanning. The following table lists the different scanner configurations,

giving the optics and radio frequency (RF) configurations by country.

Scanner Configuration

1552C0003 A standard-range optics scanner with RF for Europe,

except France and Spain.

1552C0004 A standard-range optics scanner with RF for Argentina,

Brazil, Canada, Chile, U.S.A.

1552C0007 A standard-range optics scanner with RF for Australia.

1552C0008 A standard-range optics scanner with RF for France,

Mexico, and Spain.

1552C0103 An advanced long-range optics scanner with RF for

Europe, except France and Spain.

1552C0104 An advanced long-range optics scanner with RF for

Argentina, Brazil, Canada, Chile, U.S.A.

1552C0107 An advanced long-range optics scanner with RF for

Australia.

1552C0108 An advanced long-range optics scanner with RF for France,

Mexico, and Spain.

1552C0203 A long-range optics scanner with RF for Europe, except

France and Spain.

1552C0204 A long-range optics scanner with RF for Argentina, Brazil,

Canada, Chile, U.S.A.

1552C0207 A long-range optics scanner with RF for Australia.

1552C0208 A long-range optics scanner with RF for France, Mexico,

and Spain.

1552C0403 A high-visibility optics scanner with RF for Europe, except

France and Spain.

1552C0404 A high-visibility optics scanner with RF for Argentina,

Brazil, Canada, Chile, U.S.A.

(Continued on next page)

Scanner Configurations (continued)

Scanner Configuration

1552C0407 A high-visibility optics scanner with RF for Australia.

1552C0408 A high-visibility optics scanner with RF for France,

Mexico, and Spain.

1552C0503 A high-density optics scanner with RF for Europe, except

France and Spain.

1552C0504 A high-density optics scanner with RF for Argentina,

Brazil, Canada, Chile, U.S.A.

1552C0507 A high-density optics scanner with RF for Australia.

1552C0508 A high-density optics scanner with RF for France, Mexico,

and Spain.

1552C0603 A linear imager scanner with RF for Europe, except France

and Spain.

1552C0604 A linear imager scanner with RF for Argentina, Brazil,

Canada, Chile, U.S.A.

1552C0607 A linear imager scanner with RF for Australia.

1552C0608 A linear imager scanner with RF for France, Mexico, and

Spain.

Configurations are continually being added to this list; consequently,

some of the most recent additions may not be shown here. Contact your

local Intermec representative for a current list.

1233*

Unpacking the Scanner

Your scanner was thoroughly tested and inspected before it was shipped

from the factory. The shipping box contains:

•Sabre 1552 scanner

•Sabre 1552 Bar Code Scanner User’s Guide

•Important 1552 Information manual supplement

If any of these items are missing or damaged, please contact your local

Intermec representative. Retain the shipping box in case you need to

ship the scanner.

Sabre 1552 Scanner

Scan

window

Trigger

Battery

pack

Battery

pack clip

(2 places)

Light

1552S013.eps

Audio - sound

port

Understanding the Features

Please make sure that you understand these important features of the

scanner.

Light

The light indicates the status of the scanner and battery pack.

Color Description

Yellow The device is scanning.

Flashing yellow The battery pack charge is low. Remove the battery

pack and recharge it.

Green The scanner is out of range of the base station. Move

the scanner and base to within 15 meters (50 feet) of

each other.

Green for

2 seconds

The bar code has been successfully scanned and

transmitted.

Green for

5 seconds

The scanner successfully scanned and transmitted a

programming bar code.

Flashing green for

2 seconds

The scanner is out of the range of the base or not

associated with the base.

Flashing green for

5 seconds

The scanner unsuccessfully scanned a programming

bar code.

None The device is not scanning.

1233*

Beeps

The scanner emits these beeps to indicate either a successful scan or a

situation that requires your attention.

Beep Sequence Description

No beep No scanning, scanning, or low battery (trigger pulled)

1 beep Successful decode and communication.

Clicking, then 1

beep

Successful reassociation.

Clicking only Unsuccessful reassociation.

2 beeps, clicks,

then 1 beep

Successful association to base.

3 beeps (same

tone)

Unsuccessful association to base (10th scanner), out of

range, or no network.

3 beeps (2 high

and 1 low)

Enter/exit programming mode or successful

association to base. Successful or unsuccessful

parameter change in programming mode.

4 beeps (low,

high, low, high

tones)

Communication error: successful decode with possible

unsuccessful communication to base. Check host to

determine if data arrived properly.

Electrical Rating

The scanner electrical ratings are

4,5 to 5,5V; 380 mA.

Associating the Scanner to the MicroBar

9745 Base Station

Before you start scanning, you must associate your scanner to the

MicroBar 9745 Base Station that the scanner will be sending data to.

The scanner can only communicate with one base at a time, but the base

can communicate with more than one scanner. Any parameters, such as

preambles or postambles, loaded onto the base will be loaded onto the

scanners associated to it.

To associate the scanner to the base

1. Connect the base to your network. For help, see the Sabre 1552

Scanner and MicroBar 9745 Base Station System Manual (Part No.

070086).

2. Install the battery pack in the scanner. The scanner sounds a single

beep. For help installing the battery pack, see the instruction sheet

that came with your battery pack.

3. Scan the bar code on top of the base. The scanner will sound two

beeps, clicks, and one beep.

Associating the Scanner to the Base

Association

bar code

1552QRG.004

Otros manuales para Sabre 1552 Scanner

Tabla de contenidos

Otros manuales de Lector de código de barras de Intermec

Intermec

Intermec EasyCoder 301 Manual de usuario

Intermec

Intermec SF61BUG Manual de usuario

Intermec

Intermec ScanPlus 1800 Manual

Intermec

Intermec SR61T1D Manual de usuario

Intermec

Intermec ScanPlus 1802 Manual

Intermec

Intermec SR61B Manual de usuario

Intermec

Intermec SR30 Manual de usuario

Intermec

Intermec IF30 Manual de usuario

Intermec

Intermec SR61 Manual de usuario

Intermec

Intermec SF61 Manual de usuario

Intermec

Intermec EasyCoder PD4 Manual de usuario

Intermec

Intermec CN70 RFID Manual de usuario

Intermec

Intermec SF51 Manual de usuario

Intermec

Intermec IV7 Manual de usuario

Intermec

Intermec IV7 Manual

Intermec

Intermec MaxiScan 3100 Manual de usuario

Intermec

Intermec 700C Manual

Intermec

Intermec SR61T Manual de usuario

Intermec

Intermec MaxiScan 1000 Guía de configuración rápida

Intermec

Intermec 1280 Series Guía de referencia

Intermec

Intermec IF61 Manual de usuario

Intermec

Intermec ScanPlus 1800 Manual de usuario

Intermec

Intermec SG20B Manual de usuario

Intermec

Intermec EasyCoder 601XP Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario