Intermec Sabre 1555 Manual de usuario
Sabre 1555 RFID &
P/N 072414
Programmer’s Reference Manual
Bar Code Reader
Sabre 1555 RFID &
P/N 072414-001
Programmer’s Reference Manual
Bar Code Reader
Sabre 1555 PDT Rev. 2.15
RFID Board Rev. 3.10
LCD Board Rev. 1.4
Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203-9280
U.S. service and technical support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian service and technical support: 1-800-668-7043
Canadian media supplies ordering information: 1-800-268-6936
Outside U.S.A. and Canada: Contact your local Intermec service supplier.
The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate
and/or service Intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec.
Information and specifications in this manual are subject to change without notice.
©2001 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, INCA (under license), MobileLAN, JANUS, IRL, Trakker Antares, EZBuilder,
TE 2000, Data Collection Browser, dcBrowser, Universal Access Point, UAP, Duratherm, EasyCoder, Precision Print,
PrintSet, Virtual Wedge, and CrossBar are either trademarks or registered trademarks of Intermec.
Throughout this manual, trademarked names may be used. Rather than put a trademark (TM or ®) symbol in every
occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit
of the trademark owner, with no intention of infringement.
There are U.S. and foreign patents pending.
Contents
Contents
v
Table of Contents
Before You Begin 1
Purpose 1-3
Intended Audience 1-3
Guide Topics 1-3
Related Documentation 1-4
Bar Code Conventions 1-4
Typographical Conventions 1-5
Getting Started 2
1555 Portable Data Terminal and Standard Versions 2-3
Setting Up the 1555 2-3
PDT Version 2-4
Standard Version 2-4
Configuring Your Sabre 1555 2-4
Configuring the 1555 Using EasySet 2-5
Starting EasySet 2-5
Configuring the 1555 Using the Mode Button, Trigger, and
LCD 2-5
Sabre 1555 Features 2-6
Trigger 2-6
Mode Button 2-6
Mode Button + Trigger 2-6
Quick Mode Select 2-6
Using Quick Mode Select 2-7
Customizing Quick Mode Select 2-7
Interactive Configuration of the 1555 Using a Host System 2-8
1
2
Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
vi
Operational Modes 3
Autonomous Mode 3-3
Quick Mode Select 3-6
Bar Code Read 3-6
Tag Identify 3-6
Tag Read 3-6
Tag Write 3-6
Tag Read/Write (Tag RW) 3-6
Tag Filter 3-6
Tag Filter/Read (Tag FR) 3-6
Tag Filter/Write (Tag FW) 3-6
Tag Filter/Read/Write (Tag FRW) 3-6
Tag Filter Settings 3-6
Tag Read Settings 3-7
Tag Write Settings 3-7
LCD Settings 3-8
Communication 3-8
Reset 3-8
Data Buffer 3-8
Firmware Versions 3-9
Exit Setup 3-9
Main Communications Port Command Set 3-10
Command Types 3-10
Configuration Commands 3-11
Interactive Commands 3-11
Dialog with the Host System 3-11
Interactive Programming Mode 4
System Requirements 4-3
Communications Interface 4-3
RS-232 TTL Interface for PDT Version 4-3
RS TTL Interface for Standard Version 4-4
Baud Rate Parameter 4-4
Default RS-232 Parameters 4-5
Hardware Protocol 4-5
Point-to-Point Protocol 4-5
Frame Format 4-5
Maximum Frame Size 4-6
Proprietary DLE (Data Link Escape) 4-6
Example 1 (0x7F in the data) 4-7
3
4
Contents
vii
Example 2 (0xEE in the checksum 1) 4-7
Frame Fields 4-7
STX Delimiter 4-7
TYPE 4-7
<CMD/RESP> <[PARM/DATA]> 4-7
FRAME_MANAGEMENT (FM) 4-8
CHK (Checksum) 4-9
ETX Delimiter 4-10
Frame Acknowledgment 4-11
Implementation Rules 4-12
Checksum Calculation 4-13
PPP Frame Type 4-16
<TYPE> Definitions 4-16
Binary Frame Response (BFR = 0x01) 4-17
Numerical ASCII Data (NAD = 0x02) 4-18
Accepted PPP Command and Sending Information (ASI =
0x03) 4-18
External Synchronization Attempt (ESA = 0x04) 4-18
How to Use the ESA Command 4-19
Accepted Command (ACC = 0x06) 4-21
Interactive Mode Command Error Command (IEC = 0x07)
4-21
Download Application Program (DAP = 0x09) 4-21
Interactive Mode Command (IMC = 0x0A) 4-21
Setup Mode Command (SMC = 0x0D) 4-21
Product Event (PEV = 0x0E) 4-21
Not Accepted Command (NAC = 0x15) 4-22
Product Version Identification (PVI = 0x16) 4-22
Resend Last Message (RLM = 0x19) 4-22
Product Resend Command (PRC=0x3F) 4-23
Application Examples 4-23
Typical Host Frame Communication Algorithms 4-24
Sample Algorithm for Command Transmission
Procedure 4-25
Sample Algorithm for Command Reception
Procedure 4-26
Sample Algorithm for Low-Level Acknowledgment
Procedure 4-27
Lite Acknowledgment Option 4-27
Remote Control Interface 4-28
Command Types 4-29
Interactive Mode Commands (IMC = 0x0A) 4-30
Audio/Visual Function 4-31
RFID Function 4-34
Data Buffer Function 4-39
Bar Code Function 4-40
User Control Function 4-41
Setup Commands (SMC = 0x0D) 4-43
Setup Command Tables 4-43
Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
viii
Physical Interface Command 4-43
RFID Auto Configuration Commands 4-46
Bar Code Decoding Commands 4-52
Data Decoding Security Commands 4-73
Data Transmission Setting Commands 4-74
Operating Setting Commands 4-77
Configuration Utility Commands 4-79
Examples of Interactive Mode and Setup Commands 4-81
Interactive Mode 4-81
Online Setup 4-83
Otros manuales para Sabre 1555
2
Tabla de contenidos
Otros manuales de Lector de código de barras de Intermec
Intermec
Intermec SF61 Manual de usuario
Intermec
Intermec IP30 Manual de usuario
Intermec
Intermec IF30 Manual de usuario
Intermec
Intermec MaxiScan 1000 Guía de configuración rápida
Intermec
Intermec SF61 Manual de usuario
Intermec
Intermec IF30 Manual de usuario
Intermec
Intermec ScanImage 1470 Manual de usuario
Intermec
Intermec ITRF91501 Manual de usuario
Intermec
Intermec CN70 RFID Manual de usuario
Intermec
Intermec SR61T Manual de usuario
Intermec
Intermec SR61B Manual de usuario
Intermec
Intermec ScanPlus 1800 Manual de usuario
Intermec
Intermec EasyCoder PD41 Manual de usuario
Intermec
Intermec EasyCoder PX4i Manual de usuario
Intermec
Intermec EasyCoder PF2i Manual de usuario
Intermec
Intermec SF51 Manual de usuario
Intermec
Intermec EasyCoder 601XP Manual de usuario
Intermec
Intermec SR61XR Manual de usuario
Intermec
Intermec SG20B Manual de usuario
Intermec
Intermec SR60 Manual de usuario
