Intermec ColorCoder 901 Manual de usuario
Intermec Ethernet Adapter
P/N 068748-004
Installation Guide
Intermec Technologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. service and technical support: 1.800.755.5505
U.S. media supplies ordering information: 1.800.227.9947
Canadian service and technical support: 1.800.688.7043
Canadian media supplies ordering information: 1.800.268.6936
Outside U.S. and Canada: Contact your local Intermec service
supplier.
The information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and/or service
Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of
Intermec.
Information and specifications in this manual are subject to change
without notice.
1998-1999 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, JANUS, IPL, TRAKKER,
Antares, Adara, Duratherm, EZBuilder, EasyCoder, Precision Print,
PrintSet, Virtual Wedge, and CrossBar are either trademarks or
registered trademarks of Intermec.
Throughout this manual, trademarked names may be used. Rather than
put a trademark (or ) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of
infringement.
iii
Contents
Overview of the Ethernet Adapter 5
Connecting the External Ethernet Adapter to
Your Printer 7
Downloading the IP Address 9
Installing for a Macintosh Network 11
Installing for a NetWare Network 12
Using NDPS or AXIS NetPilot to Install the
Ethernet Adapter 12
Setting Up Print Queues and Advanced Operating
Parameters 13
Installing for a UNIX Network 14
Installing for a Windows Network 16
Windows 95, 98, and NT 17
Windows 3.1 and Windows for Workgroups 17
Windows Clients Using LANtastic 19
Printing From a Windows Network 19
Installing for an OS/2 Network 19
Configuring the Centronics Interface Timing 21
Web Management 22
5
Overview of the Ethernet Adapter
You can use three options to connect your Intermec printer to an
Ethernet network:
•The external Ethernet adapter, Part No. 068788, which is a plug-in
network adapter.
•The internal Ethernet adapters, Part Nos. 068789 and 069227,
which are installed in your printer.
You can connect only the external Ethernet adapter to the following
Intermec printers to print labels:
•91* printers •601XP printers
•301* printers •901* printers
•401* printers •4630* printers
•501*, 501E*, 501S*, and
501XP printers •7421 and 7422* printers
*These printer models require an external power supply to run the
external Ethernet adapter.
You can connect either the external or the internal Ethernet adapter Part
No. 068789 to the following Intermec printers to print labels:
•3240* printers
•3400* and 3440* printers
•3600* printers
•4400* printers
*These printer models require an external power supply to run the
external Ethernet adapter.
Note: For the 3240, 3400, 3440, 3600, and 4400 printers, you must
have the parallel port option installed on your printer to connect the
external Ethernet adapter. The Ethernet adapter is not compatible with
the 4400A, but you can use the adapter with all later 4400 models.
You can connect the internal Ethernet adapter Part No. 069227 to the
4420 and 4440 printers.
Note: With the internal Ethernet adapter installed, the parallel port on
the 4420 and 4440 printers is not available for use.
6
Use the following illustrations to familiarize yourself with the external
or internal Ethernet adapter.
External Ethernet Adapter
10BaseT
connector
External
power
supply
connector
Power
LED
Network
LED
Parallel port
connector
Test button
AXISI.001
+
Internal Ethernet Adapter
O
I
Network
LED
Power
LED
Test
button
10BaseT
connector
AXISI.002
7
Connecting the External Ethernet Adapter
to Your Printer
Although you can connect the external Ethernet adapter to several
different Intermec printers, the illustrations in the following procedure
use the 7421.
To connect the Ethernet adapter
1. Note the serial number found on the underside of the Ethernet
adapter. You need this number during the configuration.
2. Turn off the printer.
3. Plug the parallel port connector into the printer’s parallel port.
AXISI.003
10BaseT
connector
Parallel
port
Parallel port
connector
10BaseT
cable
4. Connect a 10BaseT cable into the 10BaseT connector.
8
5. If necessary, plug in the external power supply.
AXISI.004
10BaseT
cable
External
power
supply
connector
External
power
supply
6. Switch on the printer. The network LED flashes.
Now you can install the printer and adapter into your network.
To test the connection with firmware version 5.59 or higher
•Press the Test button. The printer prints a test label.
You can find out what firmware version you have using a standard Web
browser.
1. Open the Ethernet adapter’s home page.
2. Click the Management button.
9
To test the connection with a firmware version lower than 5.59
Note: Data Line Print mode is available on the following printer
models: 3240, 3400, 3440, 3600, 4400, 4420, and 4440.
1. Turn off your printer.
2. Press and hold the Feed/Pause button while you turn on the printer.
The printer prints the hardware configuration test label.
3. Release the Feed/Pause button. The printer is now in Data Line
Print mode.
4. Press and release the Test button on the Ethernet adapter. The
printer prints each character with its hexadecimal equivalent
underneath.
5. To enter normal Print mode, turn the printer power off and then on
again.
Downloading the IP Address
This section explains how to use ARP (address resolution protocol) to
download the IP address to the Ethernet adapter. For other methods of
downloading the IP address, see the Intermec Ethernet Adapter User’s
Manual (Part No. 068749).
Note: Do not use the example IP address when installing your Ethernet
adapter. Always consult your network administrator before assigning
an IP address.
To download the IP address for Windows
1. Start a DOSwindow.
2. Type the following command:
arp -s
nnn.nnn.n.nnn nn-nn-nn-nn-nn-nn
ping
nnn.nnn.n.nnn
arp -d
nnn.nnn.n.nnn
where:
nnn.nnn.n.nnn is the IP address for the Ethernet
adapter
nn-nn-nn-nn-nn-nn is the Ethernet address for the Ethernet
adapter
10
Example:
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d 192.168.3.191
The host will return Reply from 192.168.3.191 ... or a
similar message. This reply indicates that the address has been set and
communications established.
To download the IP address in a UNIX environment
•Type the following command:
arp -s
host_name
nn:nn:nn:nn:nn:nn
temp
ping
host_name
where:
host_name is the name mapped to the Ethernet adapter’s
IP address.
nn:nn:nn:nn:nn:nn is the Ethernet address for the adapter.
Example:
arp -s npsname 00:40:8c:10:00:86 temp
ping npsname
The host will return npsname is alive or a similar message. This
message indicates that the address has been set and communications
established.
When you execute the ping command for the first time, you may
experience a longer response time than is usual.
The ARP command can vary between different UNIX systems.
Berkeley System Distribution (BSD) type systems expect the host name
and node address in reverse order. Furthermore, IBM AIXsystems
require the additional argument ether. For example:
arp -s ether
host name
00:40:8c:10:00:86 temp
Otros manuales para ColorCoder 901
2
Este manual sirve para los siguientes modelos
18
Tabla de contenidos
Otros manuales de Adaptador de Intermec
Intermec
Intermec USB Bluetooth Adapter Manual de usuario
Intermec
Intermec BU-2073-J Manual de usuario
Intermec
Intermec AN3 Manual de usuario
Intermec
Intermec AA23 Manual de usuario
Intermec
Intermec 1700 Series Manual de usuario
Intermec
Intermec CN51 Manual de usuario
Intermec
Intermec EasyLAN 100E Manual de usuario
Intermec
Intermec CN2 Manual de usuario
Intermec
Intermec AE37 Manual de usuario
Intermec
Intermec CK70 RFID Manual de usuario
Intermec
Intermec 1100 Series Manual de usuario
Intermec
Intermec Ethernet Adapter Manual de usuario
Intermec
Intermec EasyLAN 10I2 Manual de usuario
Intermec
Intermec CK60 Ethernet Multidock Manual de usuario
Intermec
Intermec L5020 Manual de usuario
Intermec
Intermec BSM-RN41 Manual de usuario
Intermec
Intermec AA12 Manual
Intermec
Intermec SF51 Manual de usuario
Intermec
Intermec CN70 RFID Manual de usuario
Intermec
Intermec CN3 Series Manual de usuario
