Quick Start for the InTemp® CX600 and CX700 Series Loggers
1 Administrators: Set up an InTempConnect® account.
Note: If you are using the logger with the InTemp app only, skip
to step 2.
New administrators: Follow all the following steps.
Just adding a new user: Follow only steps c and d.
a. Go to intempconnect.com and follow the prompts to set up an
administrator account. You’ll receive an email to activate the
account.
b. Log into intempconnect.com and add roles for the users you
want to add to the account. Select Roles from the System
Setup menu. Click Add Role, enter a description, select the
privileges for the role and click Save.
c. Select Users from the System Setup menu to add users to your
InTempConnect account. Click Add User and enter the email
address and first and last name of the user. Select the roles for
the user and click Save.
d. New users will receive an email to activate their user accounts.
3Configure the logger.
Important: You cannot restart the CX602 and CX702 loggers
once you begin logging. Do not continue with these steps
until you are ready to use these loggers.
InTempConnect users: Configuring the logger requires sufficient
privileges. Administrators or those with the required privileges
can also set up custom profiles and trip information fields. Do this
before completing these steps. If you plan to use the logger with
the InTempVerify™ app, you must create a profile with
InTempVerify enabled. See intempconnect.com/help for details.
InTemp app only users: The logger includes preset profiles. To
set up a custom profile, tap the Settings icon and tap CX600
Logger or CX700 Logger before completing these steps.
a. Press the button on the logger to wake it up.
b. Tap the Devices icon in the app. Find the logger in the list and
tap it to connect to it. If you are working with multiple loggers,
press the button on the logger again to bring it to the top of
the list. If the logger does not appear, make sure it is within
range of your device.
c. Once connected, tap Configure. Swipe left and right to select a
logger profile. Type a name for the logger. Tap Start to load the
selected profile to the logger. InTempConnect users: If you set
up trip information fields, you will be prompted to enter
additional information. Tap Start in the upper right corner
when done.
2 Download the InTemp app and log in.
a. Download InTemp to a phone or tablet.
b. Open the app and enable Bluetooth® in
the device settings if prompted.
c. InTempConnect users: Log in with your InTempConnect
account email and password from the InTempConnect User
screen.
InTemp app only users: Swipe left to the Standalone User
screen and tap Create Account. Complete the fields to create an
account and then log in from the Standalone User screen.
22024-I MAN-CX600-CX700-QSG
Quick Start for the InTemp® CX600 and CX700 Series Loggers
1 Administrators: Set up an InTempConnect® account.
Note: If you are using the logger with the InTemp app only, skip
to step 2.
New administrators: Follow all the following steps.
Just adding a new user: Follow only steps c and d.
a. Go to intempconnect.com and follow the prompts to set up an
administrator account. You’ll receive an email to activate the
account.
b. Log into intempconnect.com and add roles for the users you
want to add to the account. Select Roles from the System
Setup menu. Click Add Role, enter a description, select the
privileges for the role and click Save.
c. Select Users from the System Setup menu to add users to your
InTempConnect account. Click Add User and enter the email
address and first and last name of the user. Select the roles for
the user and click Save.
d. New users will receive an email to activate their user accounts.
3Configure the logger.
Important: You cannot restart the CX602 and CX702 loggers
once you begin logging. Do not continue with these steps
until you are ready to use these loggers.
InTempConnect users: Configuring the logger requires sufficient
privileges. Administrators or those with the required privileges
can also set up custom profiles and trip information fields. Do this
before completing these steps. If you plan to use the logger with
the InTempVerify™ app, you must create a profile with
InTempVerify enabled. See intempconnect.com/help for details.
InTemp app only users: The logger includes preset profiles. To
set up a custom profile, tap the Settings icon and tap CX600
Logger or CX700 Logger before completing these steps.
a. Press the button on the logger to wake it up.
b. Tap the Devices icon in the app. Find the logger in the list and
tap it to connect to it. If you are working with multiple loggers,
press the button on the logger again to bring it to the top of
the list. If the logger does not appear, make sure it is within
range of your device.
c. Once connected, tap Configure. Swipe left and right to select a
logger profile. Type a name for the logger. Tap Start to load the
selected profile to the logger. InTempConnect users: If you set
up trip information fields, you will be prompted to enter
additional information. Tap Start in the upper right corner
when done.
2 Download the InTemp app and log in.
a. Download InTemp to a phone or tablet.
b. Open the app and enable Bluetooth®
in the device settings if prompted.
c. InTempConnect users: Log in with your
InTempConnect account email and password from the
InTempConnect User screen.
InTemp app only users: Swipe left to the Standalone User
screen and tap Create Account. Complete the fields to create an
account and then log in from the Standalone User screen.
22024-I MAN-CX600-CX700-QSG
