Innoband 8520-B1 Manual de usuario

Version 1.0

Innoband 8520-B1

User Manual

Version 1.0

User Manual

Innoband 8520-B1

Information in this document is subject to change without notice and does not represent a commitment on the

part of Innoband Technologies, Inc. The software described in this document is furnished under a license

agreement and may be used or copied only in accordance with the terms of the license agreement. It is against

the law to copy the software on any other medium except as specifically allowed in the license agreement. The

licensee may make one copy of the software for backup purposes. No part of this manual may be reproduced or

transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any

purpose without the written permission of Innoband Technologies, Inc.

Manual Version 1.0

June 2012

Innoband is a trademark of Innoband Technologies, Inc. The trademarks, logos and service marks (“Marks”)

displayed on this manual are the property of Innoband or other third parties. Users are not permitted to use these

Marks without the prior written consent of Innoband or such third party that may own the Mark. IBM is a

registered trademark of International Business Machines Corporation. Intel and Pentium are registered

trademarks of Intel Corporation. Microsoft, MS-DOS, Windows, and the Windows logo are registered trademarks

of Microsoft Corporation. All other products are trademarks or registered trademarks of their respective owners.

Table Content

Getting started...................................................................................................... 5

Unpacking.......................................................................................................... 5

Choosing right place for your Device ..................................................................... 5

Subscription of Internet Service............................................................................ 6

Overview ........................................................................................................... 6

Physical Outlook ................................................................................................. 7

Front Panel ........................................................................................................ 7

LED Status......................................................................................................... 7

Rear Panel ......................................................................................................... 8

System Requirement........................................................................................... 8

Install your new device .......................................................................................... 9

Connect your Router ........................................................................................... 9

Configure the PC (TCP/IP settings) Introduction.....................................................10

Configure the PC (TCP/IP settings) for Windows 2000 ............................................10

Configure the PC (TCP/IP settings) for Windows XP ................................................11

Configure the PC (TCP/IP settings) for Windows Vista.............................................12

Configure the PC (TCP/IP settings) for Windows 7..................................................13

Configure the PC (TCP/IP settings) for Mac OS 9.x .................................................14

Configure the PC (TCP/IP settings) for Mac OS X ...................................................14

Web configuration ................................................................................................16

Router access....................................................................................................16

Quick start ........................................................................................................16

Access to the Router advanced configuration.........................................................18

Info .................................................................................................................19

Device Info ....................................................................................................19

WAN..............................................................................................................20

Traffic Statistics ..............................................................................................20

Route ............................................................................................................20

ARP Table ......................................................................................................21

Advanced Configuration......................................................................................22

Connection Mode ............................................................................................22

WAN Service ..................................................................................................23

LAN...............................................................................................................24

DHCP Settings / Server....................................................................................24

DHCP Settings / Client.....................................................................................26

NAT / Virtual Server ........................................................................................26

NAT / Port Triggering.......................................................................................28

NAT / DMZ Host..............................................................................................29

Security / IP Filtering Outgoing.........................................................................30

Security / IP Filtering Incoming ........................................................................31

Security / URL Filter ........................................................................................32

Time restriction ..............................................................................................33

Quality of Service............................................................................................34

Quality of Service / Queue Config .....................................................................35

Routing / Default Gateway ...............................................................................36

Routing / Static Route .....................................................................................37

DNS / DNS Server...........................................................................................38

Dynamic DNS .................................................................................................39

DSL...............................................................................................................41

UPnP .............................................................................................................41

Interface Grouping ..........................................................................................42

Multicast / IGMP Configuration..........................................................................44

Wireless ...........................................................................................................45

Basic .............................................................................................................45

Security.........................................................................................................46

MAC Filter ......................................................................................................49

Wireless Bridge...............................................................................................50

Station Info....................................................................................................50

Diagnostics .......................................................................................................52

Management .....................................................................................................53

System Log ....................................................................................................53

SNMP Agent ...................................................................................................54

TR-069 Client .................................................................................................55

Internet Time .................................................................................................56

Access Control / Passwords ..............................................................................57

Backup ..........................................................................................................58

Update Software .............................................................................................59

Reboot ..........................................................................................................60

Exit..................................................................................................................61

Back to Wizard ..................................................................................................61

Troubleshooting ...................................................................................................62

Problems with LAN access...................................................................................62

Problems with WAN access..................................................................................62

Product specification .............................................................................................63

Product specification ..........................................................................................63

Safety Notes .....................................................................................................64

For Installation ...............................................................................................64

For Using .......................................................................................................64

For Service.....................................................................................................64

Warning.........................................................................................................64

Caution..........................................................................................................65

Glossary ..............................................................................................................66

Certifications........................................................................................................73

FCC..................................................................................................................73

Warranty .............................................................................................................75

Contact information ..............................................................................................77

Getting started

Unpacking

Check the contents of the package against the pack contents checklist below. If any of

the items is missing, then contact the dealer from whom the equipment was purchased.

Device

Power Adapter and Cord

RJ-11 DSL Line Cable (Grey)

RJ-45 Ethernet Cable (Yellow)

Quick Start Guide

CD

Verify that the following items came with your INNOBAND 8520-B1 kit:

INNOBAND 8520-B1 Quick Start Guide ADSL cable Ethernet cable

(gray) (yellow)

CD-ROM Power supply

Choosing right place for your Device

1. Place the Device close to the wall outlet and power outlet for the cable to reach it

easily.

2. Avoid placing the device in places where people may walk on the cables. Also

keep it away from direct sunlight or heat sources.

3. Place the device on a flat and stable stand.

4. Connect Cables and Splitter as described below to avoid interferences with your

regular telephone service.

Subscription of Internet Service

To use this Device, you have to subscribe for a service from your broadband service

provider. According to the service type you subscribe, you will get various IP addresses:

Dynamic IP: If you Apply for dial-up connection, you will be given an Internet

account with username and password. You will get a dynamic IP by

dialling up to your ISP.

Static IP address: If you Apply for full-time connectivity, you may get either one static

IP address or a range of IP addresses from your ISP. The number of

IP addresses varies according to different service provider.

Overview

Thank you for choosing the Innoband 8520-B1. The Router lets you access the Internet

via a wireless connection or through one of its four switched ports. You can also use the

Router to share resources such as computers, printers and files. A variety of security

features help to protect your data and your privacy while online. Configuring the Router

is easy using the provided browser-based utility.

This chapter provides you the description for the LED and connector for front and rear

view of the router. Before you use/install this router, please take a look at this

information first.

Physical Outlook

Front Panel

The following picture, show the front panel of the DSL Router:

LED Status

The ADSL WLAN Router is equipped with LED’s on the front panel as described in the

table below (from left to right):

LED

Color Status

Description

Power

Green

Always On

The device has power

OFF

The device has no power or power adapter is

damaged

PPP/ACT

Green

Always On

Connected to Internet

Off

No Internet Connection

WLAN

Green

Steady On

Wireless connection is made

Flashing

Packets are being transferred

Off

Wireless is disabled

DSL

Green

Slow

Flashing

DSL Link has not been established

Fast

Flashing

DSL Link is being established

Always On

DSL Link has already been established

LAN

1/2/3/4

Green

Off

Unconnected

Flashing

Packets are being transferred

Always On

The router has been connected to the computer

WPS

Green

Terminal WPS is successfully connected and the

LED lights off in 5 minutes

Flashing

WLAN terminal is connecting WPS

Off

No WLAN terminal WPS connection is present or

terminal WPS connection exceeds 5 minutes

Rear Panel

The ADSL WLAN Router is equipped with Connectors/Switches on the rear panel as

shown in the picture below:

The ADSL WLAN Router is equipped with Connectors on the rear panel as described in

the table below (from left to right):

Connector

Desription

DSL

RJ-11 connector for DSL

Ethernet 1-4

Ethernet RJ-45 connector (LAN 1-4)

Power

9VAC Power connector

WPS

Reset

Hold and press it for 1 seconds to connect WPS

Hold and press it 7 seconds to reset to factory defaults.

Switch

Power switch

Antenna

Two Antenna connectors

System Requirement

To access the ADSL Router via Ethernet, the host computer must meet the following

requirements:

With Ethernet network interface

Must have TCP/IP installed

Set client PC with obtain an IP address automatically or set fix IP address

With a web browser installed: (for example: Internet Explorer, FireFox, Opera,

Chrome, etc).

The ADSL Router is configured with the default IP address of 192.168.1.1 and subnet

mask of 255.255.255.0. As the DHCP server is Enable by default, The DHCP clients

should be able to access the ADSL Router. Or you could assign an IP address to the host

PC first for initial configuration.

You also can manage the ADSL Router through a web browser-based manager: ADSL

ROUTER CONTROL PANEL. The ADSL Router manager uses the HTTP protocol via a web

browser to allow you to set up and manage the device.

Install your new device

Connect your Router

This chapter is to help you accessing into Internet with a quick and convenient way. If

you need more detailed information for web configuration, please get into the next

chapter for the advanced configuration.

NOTE: To configure the device via web browser, at least one properly-configured PC must

be connected to the network (either connected directly or through an external hub/switch

to the LAN port of the device).

1. With your computer off, plug the end of the ADSL cable (gray) into the DSL port

of your ADSL WLAN Router.

2. Connect the Ethernet cable (yellow) to the LAN port of your ADSL WLAN Router.

3. Connect the other end of the Ethernet cable to the LAN port of your computer.

4. Connect the power supply to your ADSL WLAN Router

5. Plug the power plug into a power outlet.

6. Turn your computer on and wait until your operating system (OS) is started up.

7. Proceed with installation (Read first the introduction and continue then with the

paragraph related to your operating system).

Configure the PC (TCP/IP settings) Introduction

You will learn how to configure your computer to communicate with the Innoband

ADSL Router.

To do this, you will need to configure your PC’s network settings to obtain an IP

address automatically. Computers use IP addresses to communicate with each other

across a network or the Internet.

Find out which operating system your computer is running, such as Windows 98,

Windows ME, Windows NT4, Windows 2000, Windows XP, Windows Vista, Windows 7 or

Macintosh OS 9.x, 10.x. You will need to know which operating system your computer is

running. You can find out by clicking on Start -> Settings. (If your Start menu doesn’t

have a Settings option, you are running Windows XP or Windows Vista. In this case you

can select the Control Panel directly from the Start menu.) Then, click on Control Panel

and double-click on the System icon.

Click the Cancel button when done.

Once you know which operating system you are running, follow the directions in this step

for your computer’s operating system.

The next few pages tell you, step by step, how to configure your TCP/IP settings based

on the type of Windows or Macintosh operating system you are using

Configure the PC (TCP/IP settings) for Windows 2000

1. Click on Start -> Settings -> Control Panel. Double-click on the Network and

Dial-up Connections icon. The Network screen will appear.

2. Select the Local Area Connection icon for the applicable Ethernet adapter

(usually it is the first Local Area Connection listed).

Double-click on Local Area Connection and click on Properties.

3. Select Internet Protocol (TCP/IP) and click on Properties.

Tabla de contenidos

Otros manuales de Enrutador de red de Innoband

Innoband

Innoband 8012-B1 Manual de usuario

Innoband

Innoband 8012-R2 Manual de usuario

Innoband

Innoband AV 200P-I1 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad