Inateck BCST-50 Instrucciones y recetas

Supplementary Manual

BCST-50 Barcode Scanner

English

Contents

1. Reset to Factory Mode 1

2. Inventory Mode 1

3. Show Battery Level 2

4. Bluetooth HID and SPP modes 3

5. Setting for Volume of Sound 3

6. Interval Setting for the Duplicate Scanning 4

6.1 Time Interval Setting 4

7. Setting for Inverse Barcode 5

8. Convert UPC-A to EAN-13 5

9. Settings to read all kinds of codes 6

9.1 Scanning Conguration on BCST-50 6

9.2 EAN-13 7

9.3 EAN-8 8

9.4 UPC-A 9

9.5 UPC-E0 10

9.6 UPC-E1 10

9.7 Code 128 11

9.8 Code 39 12

9.9 Code 93 14

9.10 Codabar 15

9.11 Interleaved 2 of 5 16

9.12 Industrial 25 17

9.13 Matrix 2 of 5 18

9.14 Code11 19

9.15 MSI 20

9.16 QR 21

9.17 Data Matrix 21

9.18 PDF417 22

Contact Information 23

1. Reset to Factory Mode

1.1 If some function is set by a 1D barcode, you can reset it to factory mode by

scanning the barcode below.

Note: The factory default setting is indicated by an asterisk ‘*’.

Reset to Factory Mode

Enter Inventory Mode

Reset to Factory Mode Setting Completed

1.2 If some function is set by a two-dimensional code, you can reset it to factory

mode by scanning the two-dimensional code below.

2. Inventory Mode

If you want to keep the barcodes in the buffer of Inateck BCST-50 for multiple

uploading, you can choose inventory mode. In inventory mode, Inateck BCST-50 will

count the number of the barcodes automatically. Users may use inventory mode

to keep scanned barcodes in the buffer of Inateck BCST-50, and upload them to

computer in batches. Under inventory mode, users are not restricted to the time

and location when upload data. Of course, history data can be cleared in bu󱐯er after

uploading. More details about inventory mode are as below.

1) Scan the ‘Enter Inventory Mode’ barcode to enter Inventory Mode

Data Upload (for Inventory Mode only)

Clear Data in Bu󱐯er (for Inventory Mode only)

(*) Return to Common Mode

Upload the Number of scanned barcodes (for Inventory Mode only)

2) Scan the ‘Data Upload (for Inventory Mode only)’barcode to upload data from

bu󱐯er (for Inventory Mode only)

3) Scan the barcode to upload the number of scanned barcodes (for Inventory Mode

only)

4) Scan the barcode to clear data in bu󱐯er (for Inventory Mode only).

5) Scan the barcode to return to Common Mode.

3. Show Battery Level

Show Battery Level

4. Bluetooth HID and SPP modes

BCST-50 has Bluetooth capability that supports data transmission under two modes

including HID and SPP. When under HID mode, the BCST-50 connects your phone or

computer automatically after pairing successfully. You can open a text editor program

on your computer or phone to receive barcode information then. When under SPP

mode, the BCST-50 can only nish connecting your computer or phone with the help

of serial debugging tools after successful pairing. In that case, You should rst open a

serial debugging tool on your computer or phone, and use it to receive the barcode

data. HID is the default mode, however, you can switch the modes by scanning the

barcodes below.

（*）Enable HID Mode

Mute

Enable SPP Mode

（*）Unmute

5. Setting for Volume of Sound

6. Interval Setting for the Duplicate Scanning

Avoid duplicate scanning via the setting below, especially under continuous

scanning mode and auto-induction mode.

500ms

3000ms

Enable Interval Setting for Duplicate Scanning

1000ms

5000ms

（*）Disable Interval Setting for Duplicate Scanning

6.1 Time Interval Setting

Example

You do not want the scanner to scan one code twice within 1000ms. The settings

below may help you.

1. Scan the two-dimensional code “Enable Interval Setting for Duplicate Scanning”

2. Scan the two-dimensional code “1000ms”.

To recover to default setting, scan the two-dimensional code “(*) Disable Interval

Setting for Duplicate Scanning”.

7. Setting for Inverse Barcode

Under some situation the white and black can be inverse on a barcode. With the

settings below, the barcode scanner can scan both common barcode and the inverse

barcode.

（*）Disable decoding for 1D inverse barcode

（*）Disable decoding for inverse two-dimensional code

Enable UPC-A to EAN-13

Enable decoding for 1D inverse barcode

Enable decoding for inverse two-dimensional code

（*）Disable UPC-A to EAN-13

8. Convert UPC-A to EAN-13

9. Settings to read all kinds of codes

9.1 Scanning Conguration on BCST-50

BCST-50 can be congured to read all supported codes, but it can be disabled and

does not read any code. Relevant function codes can be found below.

To read all types of codes: Able to scan all supported codes

Not to read any type of codes: Able to scan the codes for setting purpose only

To read the default codes: Some codes are rarely used. The scanning speed can be

enhanced if the scanning for such codes are disabled. If so, the scanner BCST-50 can

read default codes only. To enable the function of reading other codes, please scan “To

read all types of codes”.

To read all types of codes

（*）To read the default codes

Not to read any type of codes

Scan the two-dimensional code below to read/not to read the additional code of

EAN-13

（*）Disable 2-digit additional code

（*）Disable 5-digit additional code

Enable 2-digit additional code

Enable 5-digit additional code

（*）To Read EAN-13 Not to read EAN-13

9.2 EAN-13

Scan the two-dimensional codes below to read/not to read EAN-13

（*）Disable the 2-digit additional code

（*）Disable the 5-digit additional code

（*）To read EAN-8

Enable the 2-digit additional code

Enable the 5-digit additional code

Not to read EAN-8

9.3 EAN-8

Scan the two-dimensional codes below to read/not to read EAN-8

Scan the two-dimensional code below to read/not to read the additional code of

EAN-8

Otros manuales para BCST-50

Tabla de contenidos

Otros manuales de Lector de código de barras de Inateck

Inateck

Inateck BCST-70 Manual de usuario

Inateck

Inateck BCST-60 Manual de usuario

Inateck

Inateck BCST-40 Manual de usuario

Inateck

Inateck P6 Manual de usuario

Inateck

Inateck BCST-91 Manual de usuario

Inateck

Inateck BCST-54 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck BCST-54 Manual de usuario

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Inateck

Inateck BCST-51 Manual de usuario

Inateck

Inateck BS02004 Manual de usuario

Inateck

Inateck BCST-70 Manual de usuario

Inateck

Inateck BCST-55 Manual de usuario

Inateck

Inateck P6 Manual de usuario

Inateck

Inateck BCST-41 Manual de usuario

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck BCST-55 Manual de usuario

Inateck

Inateck BCST-70 Manual de usuario

Inateck

Inateck BCST-50 Manual de usuario

Inateck

Inateck BCST-40 Manual de usuario

Inateck

Inateck BCST-50 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario