Inateck BCST-33 Manual de usuario

User Guide

BCST-33 Barcode Scanner

English · Deutsch · 日本語 · Français · Italiano · Español

Buzzer

Product Overview

English

Laser Window

Trigger

USB Port

LED

Shockproof Cover

EN Use of Inateck BCST-33

Startup

Wired Mode:

1. Connect Inateck BCST-33 with computer via USB cable

2. Inateck BCST-33 will continuously beep. Beep stops after successful connection.

3. Open a le on computer and move cursor to the blank where scanning output

should be placed. Scanning results can be displayed on computer then.

4. Scanning in the Hands-Free Mode

When the scanner is seated in the stand’s “cup”, the scanner’s built-in sensor places

the scanner in hands-free mode. When you remove the scanner from the stand it

operates in its normal hand-held mode.

Scan“Enter setup”barcode;

Inserting and Using the Scanner in the Stand

Scan “Exit with save” barcode

to nish the setup.

Change scanner setting by

scanning certain function

setup barcode;

Function Setup

(Note: The barcode marked by “*”means default setting of Inateck BCST-33.)

Users must read setup barcodes in order to change the default settings in Inateck

BCST-33 Barcode Scanner.

Status indication

Buzzer Indication

LED Indication

Beeping Meaning

One short high note（100ms） Read barcode successfully

One long high note（400ms） Wrong Setup （on setup status, Green LED stays on）

several long high notes （800ms） USB being congured（It happens when USB cable is inserted）

Three chord sounds Enter setup mode（Green LED on）

Exit setup mode（Green LED o󱐯）

Two short notes（tone from low to high） Correct Setup

Two short beeps (tone from high to low) The connection between BCST-33 and computer is disrupted.

Indicator color Meaning

Green LED ashes once Barcode successfully read and uploaded to computer

Green LED stays on The scanner on setup status

Frequently Used Barcodes

（*）Enable Auto Laser-darkening Mode

Exit without Save

（*）Apply Enter for Su󱐰x

Enter Setup

Enable Manual Scanning Mode

Restore Factory Setting

Do Not Apply Enter for Su󱐰x

Exit with Save

Upper case for all letters

Mute

(*)Medium Volume

Enable Continuous Scanning Mode

（*）Enable Auto-sleep Mode

Lower case for all letters

（*）Keep original case

Minimum Volume

Maximum Volume

Enable Laser-On Mode

Disable Auto-sleep Mode

Setting for Keyboard Language

1. Read ’Enter setup’ Barcode

2. Select and Scan your keyboard language Barcode

3. Scan“Exit with Save” Barcode to end language setting

Note: The keyboard language of Inateck BCST-33 should keep consistent with that on

computer, otherwise, garbled might appear in scanning result.

Setting for Prex/Su󱐰x

Users can add prex/su󱐰x to scanning result. The prex/su󱐰x can have 1 to 32 digits.

More details are as below.

1. Scan “Enter setup’” Barcode

Exit with Save

Enter Setup

French Keyboard

Italian Keyboard

（*）US Keyboard

Spanish Keyboard

English (UK) Keyboard

German Keyboard

Japan( Japanese) Keyboard Canada (French) Keyboard

EN 2. Scan “Prex Setting” or “Su󱐰x Setting”

3. Scan the character barcode (32 characters at the most). For instance, “H#” is the

prex/su󱐰x to be added to the scanning result, scan the character barcode of “H”

and “#” below.

4. Scan “Exit with Save” Barcode to end the setting

Frequently Used Prex/Su󱐰x Barcodes

Note:

1) Please refer to Appendix I for more prex/su󱐰x barcodes

2) Scanning result will come with prex/su󱐰x after the setting. Nevertheless, prex/

su󱐰x can be hidden or recovered. To hide prex/su󱐰x, scan “Enter Setup” barcode,

“Hide Prex/Su󱐰x” barcode, and then “Exit with Save” barcode. To recover prex/

su󱐰x, scan “Enter Setup” barcode, “Recover Prex/Su󱐰x” barcode, and then “Exit

with Save” barcode.

Enter

Tab

Space

Backspace

Exit with Save

Prex Setting Su󱐰x Setting

H #

Delete Character(s) on Output Result

Inateck BCST-33 can help users delete character(s) on output result, either beginning

characters or the ending ones. 0 to 99 digits can be deleted. As default setting, no

character, or say 0 digit is deleted as output result. More details are as below.

1. Scan “Enter Setup” Barcode

2. Scan “Delete Beginning Character(s)” Barcode or “Delete Ending Character(s)”

Barcode

3. Scan the digit(s)barcode to be deleted.

Enter Setup

Delete Beginning Character(s)

（*）0 digit

2 digits

4 digits

6 digits

（*）Recover Su󱐰x

（*）Recover Prex

Delete Ending Character(s)

1 digit

3 digits

5 digits

7 digits

Hide Su󱐰x

Hide Prex

8 digits 9 digits

4.Scan “Exit with Save” Barcode to end the setting

Exit with Save

Note: Refer to the setting of “delete 0 digit character” if no character should be

deleted.

Otros manuales para BCST-33

Tabla de contenidos

Idiomas:

Otros manuales de Lector de código de barras de Inateck

Inateck

Inateck BCST-41 Manual de usuario

Inateck

Inateck BCST-51 Manual de usuario

Inateck

Inateck P6 Manual de usuario

Inateck

Inateck BCST-53 Manual de usuario

Inateck

Inateck BCST-43 Manual de usuario

Inateck

Inateck BCST-54 Manual de usuario

Inateck

Inateck BCST-40 Manual de usuario

Inateck

Inateck P6 Manual de usuario

Inateck

Inateck BCST-70 Guía rápida

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck BCST-91 Manual de usuario

Inateck

Inateck BCST-50 Instrucciones y recetas

Inateck

Inateck BCST-20 Manual de usuario

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck BCST-50 Manual de usuario

Inateck

Inateck BS01001 Manual de usuario

Inateck

Inateck BS02001 Manual de usuario

Inateck

Inateck BCST-70 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Inateck

Inateck BS02004 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Inateck

Inateck BCST-40 Manual de usuario

Inateck

Inateck BCST-10 Manual de usuario

Inateck

Inateck P7 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario