Impex MARCY MWB 850 Manual de usuario

MARCY MWB 850

WEIGHT BENCH

IMPEX INC.

14777 Don Julian Rd., City of Industry, CA 91746

Tel: (800) 999-8899 Fax (626) 961-9966

www.impex-fitness.com

[email protected]

NOTE:

Please read all

instructions carefully

before using this product

Table of Contents

Safety Notice

Hardware Pack

Assembly Instruction

Exploded Diagram

Parts List

Warranty

Ordering Parts

Model

MWB 850

Retain This

Manual for

Reference

07/17/03

OWNER'S

MANUAL

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICE....................................................................... 2

HARDWARE PACK………............................................................................... 3

ASSEMBLY INSTRUCTIONS........................................................................... 5

EXPLODED DIAGRAM.................................................................................... 12

PARTS LIST..................................................................................................... 13

WARRANTY..................................................................................................... 14

ORDERING PARTS.......................................................................................... 14

BEFORE YOU BEGIN

Thank you for selecting the MARCY MWB 850 BENCH by IMPEX FITNESS

PRODUCTS. For your safety and benefit, read this manual carefully before

using the machine. As a manufacturer, we are committed to provide you

complete customer satisfaction. If you have any questions, or find there

are missing or damaged parts, we guarantee you complete satisfaction

through direct assistance from our factory. To avoid unnecessary delays,

please call our TOLL-FREE customer service number. Our Customer

Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT leave children

unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms,

STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or

outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other

clothing that could become caught in the machine. Running or aerobic shoes are also

required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO NOT use

attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or physician in

attendance.

10. Before using the machine to exercise, always do stretching exercises to properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT

YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS

OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH

PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS

EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL

INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE

OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

HARDWARE PACK

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this

machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Right Upright Beam (#3) to a Rear Stabilizer (#14). Secure them with one

Bent Bracket (#17), two M10x3 ¾” Carriage Bolts (#47), two ∅¾” Washers (#48) and two

M10 Aircraft Nuts (#50). Repeat the same procedure to assemble the other side.

B.) Connect the two Upright Beams by a Cross Brace (#13) in the mid span. Secure them

with one Bent Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), two ∅¾” Washers

(#48), and two M10 Aircraft Nuts (#50) on each side.

C.) Insert two Crutches (#12) into the top openings on the top of Left & Right Upright Beams.

Insert two M12 Lock Knobs (#36) through selected holes to obtain desired height.

D.) Insert the Left and Right Safety Hooks (#20) & (#21) into the holes on top of the Crutches

(#12). Secure them with two M8 Aircraft Nuts (#51).

E.) Push four Ø 3” End Caps (#32) onto both ends of the two Rear Stabilizers.

STEP 2 (See Diagram 2)

A.) Connect the Main Seat Support (#1) to a Rear Stabilizer (#14). Secure them with one Bent

Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), two ∅¾” Washers (#48), and two

M10 Aircraft Nuts (#50).

B.) Connect the Main Seat Support (#1) to the Front Stabilizer (#5). Secure them with one

Bent Bracket (#17), two M10 x 3 ¾” Carriage Bolts (#47), two ∅¾” Washers (#48), and

two M10 Aircraft Nuts (#50).

C.) Slide the Sliding Block (#10) onto the Incline Adjustment Bar (#11). Align the holes then

thread a M18 Lock Knob (#37) into the hole to hold the Sliding Block in position.

D.) Attach two Ø ¾” Bushings (#54) to the Incline Adjustment Bar (#11). Then attach the

Bushings and Bar to the bracket on the Main Seat Support (#1). Secure it with one M10 x

3” Allen Bolt (#41), two ∅¾” Washers (#48), and one M10 Aircraft Nut (#50). Do not over

tighten the Bolt and Nut. Make sure the Bar is able to swivel.

E.) Push four Ø 3” End Caps (#32) to all ends of Rear & Front Stabilizers. DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach two Ø ¾” Bushings (#54) to the pivot on the Main Seat Support (#1).

B.) Attach two Backrest Supports (#7) to the Pivot and align the holes. Secure it with one

M10 x 6 ¼” Allen Bolt (#39), two ∅¾” Washers (#48), and one M10 Aircraft Nut (#50).

C.) Attach two Ø ¾” Bushings (#54) to the pivot on the Sliding Block (#10).

D.) Attach the holes on the two Backrest Supports to the Pivot. Align the holes. Secure them

with one M10 x 6 ¼” Allen Bolt (#39), two ∅¾” Washers (#48), and one M10 Aircraft Nut

(#50).

E.) Do not over tighten the Nuts and Bolts. Make sure the Backrest Supports are able to

swivel. DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach two Ø ¾” Bushings (#54) to the pivot on the Main Seat Support (#1). Attach the

Seat Incline Support Bracket (#8) to the Bushings and align the holes. Secure it with one

M10 x 4 ½” Allen Bolt (#40), two Ø ¾” Washers (#48), and one M10 Aircraft Nut (#50).

B.) Attach two Ø ¾” Bushings (#54) to the Seat Incline Support Bracket (#8). Attach two Seat

Support Frames (#6) to the Bracket and align the holes. Secure them with one M10 x 8 ¼”

Allen Bolt (#38), two Ø ¾” Washers (#48), and one M10 Aircraft Nut (#50).

C.) Do not over tighten the Nuts and Bolts. Make sure the Seat Incline Support Bracket and

Seat Support Frame are able to swivel. DIAGRAM 4

STEP 5 (See Diagram 5)

A.) Attach four Ø ¾” Bushings (#54) to the two Seat Support Frames (#6). Attach another

four ∅3/4” Bushings (#54) to the two Backrest Supports (#7).

B.) Attach a Backrest Support (#7) to a Seat Support Frame (#6). Please note that the

Backrest Support should be on the inside of the Seat Support Frame. Secure them with

one M10 x 2 3/8” Allen Bolt (#42) and M10 Aircraft Nut (#50).

C.) Repeat the same procedure to install the other side.

D.) Do not over tighten the Nuts and Bolts. Make sure the Seat Support Frames and

Backrest Supports are able to swivel. DIAGRAM 5

Tabla de contenidos

Otros manuales de Gimnasio en casa de Impex

Impex

Impex MARCY AB4050 Manual de usuario

Impex

Impex MARCY SM 4000 Manual de usuario

Impex

Impex Marcy MCH-1510 Manual de usuario

Impex

Impex Marcy Platinum MP-4500 Manual de usuario

Impex

Impex COMPETITOR WM-1505 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-2080 Manual de usuario

Impex

Impex MARCY MWM-6150 Manual de usuario

Impex

Impex IGS-411 Manual de usuario

Impex

Impex WM 1403 Manual de usuario

Impex

Impex Powerhouse Elite PHE 9000 Manual de usuario

Impex

Impex Apex TC-3500 Manual de usuario

Impex

Impex MARCY MWB-6901 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE SM-1050 Manual de usuario

Impex

Impex MARCY MWB-2001 Manual de usuario

Impex

Impex SA GEAR SAG-71 Manual de usuario

Impex

Impex MARCY PLATINUM MP 2100 Manual de usuario

Impex

Impex MARCY PLATINUM MP 1105 Manual de usuario

Impex

Impex Marcy Diamond Elite MD-PWR-20 Manual de usuario

Impex

Impex POWERHOUSE SB 660 Manual de usuario

Impex

Impex MARCY MWB-719 Manual de usuario

Impex

Impex MARCY MD-2082W Manual de usuario

Impex

Impex Competitor WM-203 Manual de usuario

Impex

Impex MWM 982 Manual de usuario

Impex

Impex Apex TC-3500 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario